合成氨催化剂研究的新进展

 近20多年来,随着英国BP公司钌基催化剂的发明和我国亚铁基熔铁催化剂体系的创立,标志着合成氨催化剂进入了一个新的发展时期,由唯一的传统Fe3O4路线发展为三条技术路线,并各自取得了重大进展．本文扼要介绍了Fe3O4基传统催化剂和钌基催化剂的主要研究成果和发展趋势,着重综述了我国独创的Fe1－xO基熔铁催化剂的发现及其高活性机理探讨方面的研究成果．回顾了20世纪合成氨工业及其催化剂从创立、发展,到取得辉煌成就的历程,展望了21世纪的发展趋势．     

第二代氨合成催化体系——钌系氨合成催化剂及其工业应用*

本文综述了第二代氨合成催化体系——钌系氨合成催化剂的研制、开发及工业应用情况。介绍了钌系氨合成催化剂的载体、促进剂、钌活性前身物对氨合成催化活性的影响。比较了钌系氨合成催化剂与铁系氨合成催化剂的反应机理与性能特点。新型氨合成催化工艺流程的成功开发为钌系氨合成催化剂的工业应用提供了有力的保障。     

Sol-Gel Preparation and Photoelectrochemical Properties of Fe2TiO5 Thin Films

Polycrystalline Fe₂TiO₅ films were prepared on nesa silica glass substrates by the sol-gel method, and their photoanodic properties were measured in a three-electrode wet cell with an aqueous buffer solution of pH = 7. Gel films were crystallized into Fe₂TiO₅ when fired at 500°C. The photoanodic current significantly increased when the films were fired at 700°C, and then decreased with increasing firing temperature. Thicker films obtained by repeating the gel film deposition and firing showed smaller photocurrent, and the 50 nm thick film prepared via non-repetitive deposition exhibited the maximum photocurrent. Although the photoresponse was extended to wavelengths near 500 nm, the maximum quantum yield was as low as 0.12 at a wavelength of 340 nm.     

ICP—AES法测定生铁中硅锰磷的研究

通过正交试验选择出最佳溶样条件,用电感耦合等离子体发射光谱（ICP－AES）法测定生铁中硅,锰,磷,方法简便可靠,具有良好的精密度和准确性,相对标准偏差不大于3．8％。     

柱前衍生—反相高效液相色谱法测定钢铁及合金中铌

建立了反相液相色谱法测定钢铁及合金中铌的分析方法。采用HNO3 HF H2 SO4 溶解样品 ,用酒石酸络合铌 ,以 2 (5 溴 2 吡啶偶氮 ) 5 二乙基氨基酚为柱前衍生试剂 ,在C18柱上用甲醇 水 (体积比为 5 6∶4 4 )为流动相 ,其中含 0 .0 1mol·L- 1pH为 3.5的HOAc NaOAc缓冲液。在60 0nm处测定了铌的配合物 ,方法检出限为 1.5 μg·g- 1。应用此法直接测定了合金铸铁和中低合金钢样品中铌 ,其加标回收率为 96.8%～ 10 3.2 %     

含硫磷桥基的两核铁羰基簇合物的合成和晶体结构

Fe3(CO)12与杂环二硫代次膦酸盐SP(C6H4OR)(S)N(C6H5)NC(Me)(R=Me,Et)反应,得到两个新的含硫磷桥基的双核铁羰基簇合物Fe2(CO)6[μ-η2-SC(Me)NN(C6H5)P(C6H4OMe)](Ⅰ)和Fe2(CO)6[μ-η2-SC(Me)NN(C6H5)P(C6H4OEt)](Ⅱ),以及簇合物Fe3(CO)9(μ3-S)2(已知).对它们进行了元素分析,IR,1HNMR和MS等谱学表征,并用X-ray衍射技术测定了(Ⅰ)的晶体结构.该晶体属单斜晶系,P2(1)/n空间群,晶胞参数a=11.192(2)A,b=14.272(3)A,c=16.281(3)A,β=108.22(3).,V=2470.2(8)A3,Z=4.两核簇合物中含有两个桥基Fe-S-Fe和Fe-P-Fe,而且-C(7)-N(2)-N(1)-链连结在S、P原子间,形成了两个六员螯环Fe(1)SCNNP和Fe(2)PNNCS,增强了簇合物的稳定性.     

Synthesis, Chemical Characterization, and Molecular Structure of Au8{Fe(CO)4}4(dppe)2 and Au6Cu2{Fe(CO)4}4(dppe)2

The new Au₈{Fe(CO)₄}₄(P^P)₂ and Au₆Cu₂{Fe(CO)₄}₄(P^P)₂ (P^P=dppm, dppe) neutral cluster compounds were isolated in good yields by condensation of the [Au₃{Fe(CO)₄}₂(P^P)]^- anions with Au(SEt₂)Cl and CuCl, respectively, and have been characterized by IR, NMR and microanalyses. The molecular structures of Au₈{Fe(CO)₄}₄(dppe)₂ and Au₆Cu₂{Fe(CO)₄}₄(dppe)₂ have been determined by X-ray diffraction studies. Both molecules adopt a stereogeometry of the heavy atoms consisting of a triangulated and corrugated ribbon twisted around the elongation direction. Contrary to the expectations the latter displays the two copper atoms in the sites of highest connectivity. This implies that site exchange between copper and gold occurs during the synthesis.     

Synthesis,molecular structures,and thermal decomposition of heterometallic (π-cyclooctadiene)platinum-bis(tricarbonyliron-μ3-chalcogenides)[Fe—Fe], (π-C8H12)Pt(μ3-X)2Fe2(CO)6, where X = S,Se, or Te

Transmetallation of the Fe₃(₃-X)₂(CO)₉ clusters (X = S, Se, or Te) under the action of (-C₈H₁₂)PtCl₂ afforded new heterometallic clusters (-C₈H₁₂)Pt(₃-X)₂Fe₂(CO)₆ (2—4, respectively), which were characterized by X-ray diffraction analysis. The (-C₈H₁₂)Pt fragment in these clusters is bound to two ₃-bridging chalcogen atoms X. The iron atoms are linked to each other. The coordination environment about the Pt atom is planar-square; the Pt...Fe distance is larger than 3.2 . In the synthesis of cluster 4, a new Pt complex was also obtained for which the structure (CO)₂Pt(-Te)₂Pt(CO)₂ (5) was proposed. According to the results of differential scanning calorimetry, thermal decomposition of complex 5 gave rise only to PtTe, whereas complexes 1—4 gave products with the empirical formula Fe₂PtX₂C₂O₂. The influence of the steric effects on the geometry of the clusters is discussed.     

掺杂TiO2纳米粉的合成、表征及催化性能研究

 考察了制备方法对掺杂Fe2O3,ZrO2或SnO2的TiO2纳米粉的XRD谱及催化性能的影响．结果表明,用共沉淀法制备的Fe2O3·TiO2对其XRD谱强度的影响较大,而负载法制备Fe2O3／TiO2对其XRD谱的强度无影响;两种方法制备的掺杂ZrO2或SnO2的TiO2样品对XRD谱均无影响．TEM结果表明,TiO2纳米粉的晶粒均匀,粒径为14～18nm．苯酚水溶液的光催化氧化分解反应结果表明,与TiO2样品相比,负载型Fe2O3／TiO2的催化活性明显较高,但ZrO2／TiO2,SnO2／TiO2和共沉淀型Fe2O3·TiO2的催化活性变化不大．可以认为,对掺杂Fe2O3的TiO2催化剂,负载法是较好的制备方法．     

一个新颖氰根桥联化合物SmFe(CN)_6(DMSO)_2·H_2O的合成与结构

稀土氯化物SmCl3(6H2O与K3Fe(CN)6在水/乙醇/DMSO混合溶剂中反应合成了标题化合物: SmFe(CN)6(DMSO)2(H2O(C10H14N6O3S2FeSm, Mr = 536.59),晶体属单斜晶系,空间群 P2/n,a = 7.759(1), b = 10.673(1),c = 11.014（2）?,β= 97.106（2）(,V = 905.0（2）? 3, Z = 2 , Dc = 1.969 g/cm3, F（000）= 520,R = 0.0474 , wR = 0.0925。该化合物为氰基桥联稀土-过渡金属化合物,稀土离子(Sm3+)为7配位的五角双锥构型。化合物的结构可描述为由方砖铺砌成的楼梯状二维层结构,层之间由氢键连接沿b轴方向堆积而成三维网状结构。