基于修正压力场理论的再生混凝土梁抗剪承载力计算方法研究

基于修正压力场理论分析有腹筋再生混凝土梁的剪切破坏机理,建立了更接近有腹筋再生混凝土梁实际受力的抗剪模型,并通过考虑再生骨料有效粒径和受箍筋作用下的裂缝宽度与构件裂缝处应力的联系,分析了再生骨料咬合力对梁斜截面抗剪性能的影响,提出了再生混凝土梁极限抗剪承载力的计算方法.此外,本文将理论结果与课题组自制的6根再生混凝土梁...     

Wall shear stress modified by bubbles in a horizontal channel flow of silicone oil in the transition region

We performed laboratory experiments on bubbly channel flows using silicone oil, which has a low surface tension and clean interface to bubbles, as a test fluid to evaluate the wall shear stress modification for different regimes of bubble migration status. The channel Reynolds numbers of the flow ranged from 1000 to 5000, covering laminar, transition and turbulent flow regimes. The bubble deformation and swarms were classified as packing, film, foam, dispersed, and stretched states based on visualization of bubbles as a bulk void fraction changed. In the dispersed and film states, the wall shear stress reduced by 9% from that in the single-phase condition; by contrast, the wall shear stress increased in the stretched, packing, and foam states. We carried out statistical analysis of the time-series of the wall shear stress in the transition and turbulent-flow regimes. Variations of the PDF of the shear stress and the higher order moments in the statistic indicated that the injection of bubbles generated pseudo-turbulence in the transition regime and suppressed drag-inducing events in the turbulent regime. Bubble images and measurements of shear stress revealed a correlated wave with a time lag, for which we discuss associated to the bubble dynamics and effective viscosity of the bubble mixture in wall proximity.     

纵横载荷作用下功能梯度梁的弯曲和过屈曲

基于一阶非线性梁理论和物理中面概念,导出了纵横向载荷作用下功能梯度材料(FGM)梁非线性弯曲和过屈曲问题的控制方程,并获得了该问题的精确解;据此解研究了梯度材料性质、外载荷、横向剪切变形以及边界条件等因素对功能梯度材料梁非线性力学行为的影响,分析中假设功能梯度材料性质只沿梁厚度方向,并按成分含量的幂指数函数形式变化。结果表明:纵横载荷共同作用下,功能梯度梁的弯曲构形将有无限多个;随着梯度指数的增大,梁的变形减小,临界载荷升高;随着长高比的增大,横向剪切变形的影响减小。     

基于八面体理论的岩石循环加-卸载本构模型及修正

探究岩石的受力特点及破坏特性是研究岩石地下工程安全性的关键,诸多学者都期望能在岩石本构模型的研究上取得突破性进展。在此背景下,提出了一种能够描述循环加-卸载条件下岩石的本构模型。首先,假设岩石的微元强度服从八面体剪应力理论并且微元破坏服从Weibull概率公式,将岩石本构中的损伤变量以及岩石微元强度表达式里包含的损伤因子进行本构变换,得到关于应力、应变等其他表现加-卸载下岩石损伤本构模型的参数,表示出岩石微元强度和损伤变量,再将得到的岩石微元强度和损伤变量代入所提出的岩石本构模型中,并进行等式变换得到一个函数表达式。通过将其与实验数据进行拟合对比分析,得出修正后的拟合参数,将其代入函数式中,得到损伤本构模型的修正式。最后将拟合参数进行必要的敏感性分析,得出各拟合参数的实际物理意义。     

Short-range order structure and free volume distribution in liquid bismuth: X-ray diffraction and computer simulations studies

ABSTRACT

The structure of liquid bismuth was studied by X-ray diffraction and computer simulation methods. The contraction of the atomic structure within the first coordination sphere in the temperature interval of 575-1225?K is reported. The temperature dependencies of the coordination numbers and of the free volume are analysed. On the basis of the temperature dependencies of the free volume, the temperature dependencies of viscosity and the self-diffusion coefficient were calculated to be in the ranges from 1.17 to 0.86?mPa?s and from 2.18 × 10^?9 to 5.44 × 10^?9?m²/s, respectively. The free volume – extracted results are in fair agreement with the experimental data and with the results obtained in the molecular dynamics simulations.     

4-苯乙炔基苯胺封端聚酰亚胺树脂的合成与性能研究

使用4-苯乙炔基苯胺(4-PEA)作为反应性封端剂,和3,3′,4,4′-二苯醚四酸二酐(ODPA),3,3′,4,4′-联苯四酸二酐(BPDA),1,4-双(4′-氨基-2′-三氟甲基苯氧基)苯(BTPB)和3,4′-二氨基二苯醚(3,4-′ODA)反应合成了系列4-苯乙炔基苯基封端的聚酰亚胺低聚物,对低聚物的化学结构、热性能和熔体粘度以及固化后树脂的热性能等进行了研究.实验结果表明,低聚物均具有一定的结晶性,含有ODPA的聚酰亚胺低聚物较之含有BPDA的低聚物具有更低的熔体粘度,且出现最低熔体粘度的温度更低;固化后的树脂表现出良好的热性能,含有BPDA的树脂具有更高的玻璃化转变温度;系列低聚物中二胺单体的比例对于低聚物的熔体粘度和固化后树脂的热稳定性有一定影响.     

Large Zero‐Field Splittings of the Ground Spin State Arising from Antisymmetric Exchange Effects in Heterometallic Triangles

[Ru₂Mn(O)(O₂CtBu)₆(py)₃] has an S=⁵/₂ ground state with a very large zero‐field splitting (ZFS) of D=2.9 cm^?1, as characterized by EPR spectroscopy at 4–330 GHz. This is far too large to be due to the Mn^II ion (D <0.2 cm^?1), as shown from the {Fe₂Mn} analogue, but can be modeled by antisymmetric exchange effects.     

芳基乙炔预聚物流变性能研究

用L－90流变仪研究了芳基乙炔预聚物的流变性能。结果表明：在所研究的温度范围内,芳基乙炔聚物流体为牛顿流体,其粘度随温度增加而降低,粘流活化随预聚物分子量的增加而增加。预聚物在室温存储过程中粘度逐渐增加;在60－80℃恒温90min其粘度变化不大。     

橡胶门尼粘度标准物质的研制

介绍橡胶门尼粘度标准物质的研制过程。该标准物质的均匀性、稳定性良好,定值准确可靠,符合JJG1006－94的要求。     

界面张力弛豫法研究不同分子量原油活性组分界面扩张粘弹性

采用界面张力弛豫法研究了不同分子量原油活性组分在正癸烷-水界面上的扩张粘弹性质,阐述了界面扩张模量的弹性和粘性随扩张频率的变化规律.研究发现,随着原油活性组分分子量的增大,极限扩张粘度明显增大,而极限扩张弹性逐渐增大;当分子量大于某一数值后,极限扩张弹性变化不明显.对界面张力弛豫实验结果进行拟合得到的参数表明,界面上和界面附近的微观弛豫过程的数目随原油活性组分分子量的增加而增加,弛豫过程的特征频率也呈规律性变化.不同原油活性组分的界面扩张粘弹性质可从其不同特征的微观弛豫过程得到解释.