Aggregation of clay platelets in nematic liquid crystal, 5CB: microstructure,electrical conductivity and rheological investigations

The microstructure, electrical conductivity and rheological properties of a nematic liquid crystal (5CB) doped at concentrations up to 4.5 wt% of montmorillonite (MMT) or organomontmorillonite (OMMT) clay nanoplatelets, were investigated at temperatures between 293 and 310 K. Microscopy and electrical conductivity assessment revealed noticeable differences in aggregation in MMT and OMMT suspensions, MMT nanoplatelets showing a strong tendency to aggregation. The incubation of 5CB in the presence of MMT initially produced loose aggregation, followed by the formation of compact aggregates. The latter had practically no influence on the surrounding inter-aggregate regions. In the case of OMMT, a greater degree of integration of the nanoplatelets was observed within the liquid crystal structure of 5CB, resulting in a noticeable effect on electrical conductivity and activation energy of the composite material. Thixotropy was observed in suspensions of 5CB composites formed with either MMT or OMMT. A composite of 5CB with OMMT also exhibited anomalous viscous thinning at shear rates below 100 s^?1. A structural model is suggested to explain this behaviour.     

Unsteady hydromagnetic flow of a reactive variable viscosity third‐grade fluid in a channel with convective cooling

This paper examines the combined effects of a transverse magnetic field and variable viscosity on unsteady flow of a reactive third‐grade electrically conducting fluid and heat transfer in a channel with convective cooling at the surface. It is assumed that the fluid has small electrical conductivity and the electromagnetic force produced is very small. The coupled nonlinear partial differential equations governing the problem are derived and solved numerically using a semi‐implicit finite‐difference scheme. Both numerical and graphical results are presented and physical aspects of the problem are discussed with respect to various parameters embedded in the system. It is in general noted that those parameters that increase/decrase one flow quantity (velocity or temperature) also lead to the increase/decrease respectively of the other quantity. Copyright © 2011 John Wiley & Sons, Ltd.     

Viscosity Mixing Rules for Binary Systems Containing One Ionic Liquid

In this work the applicability of four of the most commonly used viscosity mixing rules to [ionic liquid (IL)+molecular solvent (MS)] systems is assessed. More than one hundred (IL+MS) binary mixtures were selected from the literature to test the viscosity mixing rules proposed by 1) Hind (Hi), 2) Grunberg and Nissan (G–N), 3) Herric (He) and 4) Katti and Chaudhri (K–C). The analyses were performed by estimating the average (absolute or relative) deviations, AADs and ARDs, between the available experimental data and the predicted ideal mixture viscosity values obtained by means of each rule. The interaction terms corresponding to the adjustable parameters inherent to each rule were also calculated and their trends discussed.     

Static Retention of Dynamic Chiral Arrangements for Achiral Shear Thinning Metal–Organic Colloids

Chiral compounds are known to be important not only because they are the fundamental components of living organisms, but also for their unique chiroptical properties. In recent years, scientists have fabricated several chiral organic supramolecular aggregates by using chiral physical fields, such as vortex flow. Herein, the relationship between dynamic chiroptical properties and rheological nature is discussed, suggesting the shear thinning properties of non-Newtonian fluids might help colloidal particles adopt a chiral arrangement in vortices. Furthermore, the storage modulus of colloids could be increased by adding a linking agent, which successfully kept the dynamic chiroptical properties in the static state. Moreover, the salt effect on the host–guest interaction involved in the colloids was studied, the results suggested a significant enhancement of the transferred dynamic circular dichroism for the achiral guest molecule.     

Relation between interfacial shear strength and compressive strength of carbon fiber/epoxy resin composite strands

The mechanism with which the fiber-matrix interfacial strength exerts its influence on the compressive strength of fiber reinforced composites has been studied by measuring the axial compressive strength of carbon fiber/epoxy resin unidirectional composite strands having different levels of interfacial shear strength. The composite strands are used for experiments in order to investigate the compressive strength which is not affected by the delamination taking place at a weak interlayer of the laminated composites. The interfacial strength is varied by applying various degrees of liquid-phase surface treatment to the fibers. The efficiency of the compressive strength of the fibers utilized in the strength of the composite strands is estimated by measuring the compressive strength of the single carbon filaments with a micro-compression test. The compressive strength of the composite strands does not increase monotonically with increasing interfacial shear strength but showes lower values at higher interfacial shear strengths. With increasing interfacial shear strength, the suppression of the interfacial failure in the misaligned fiber region increases the compressive strength, while at higher interfacial shear strengths, the enhancement of the crack sensitivity decreases the compressive strength.     

Naturally derived green bio-additives

During the last few years, special attention has been paid by the lubricant industry towards vegetable oil-based lubricants due to their biodegradability, renewability and excellent tribological properties. But to maintain the biodegradability of the final lubricants, the additive in the lubricants must also be biodegradable. Hence, in our present work, multifunctional lubricating oil additive based on castor oil has been investigated as a less toxic, feasible alternative to traditional petroleum based additives. Homopolymer of castor oil and its copolymer with α-pinene were synthesized by a thermal method using azobisisobutyronitrile as a radical initiator. Characterization of the prepared polymers was performed by spectral analysis and gel permeation chromatography (GPC). Additive performances of each of the prepared polymers as viscosity index improvers/viscosity modifiers and pour point depressants were carefully evaluated. Photo micrographic image was used to study the effectiveness of the additives as pour point depressants. Thermogravimetric analysis (TGA) was conducted to investigate the thermal response of the additives at high temperature. Finally, biodegradability of all the polymers was tested against fungal pathogen by the disc diffusion method and soil burial test. The study illuminated excellent additive performances of the polymers and thus their potential for acting as entirely naturally derived green bio-additives for lube oil.     

Density and Viscosity of Methanol + Trichloroethylene,n-Propanol + Trichloroethylene and n-Butanol + Trichloroethylene Mixtures

Abstract

Density and Viscosity measurements on the binary mixtures of methanol + trichloro-ethylene, n-propanol + trichloroethylene, and n-butanol + trichloroethylene binary mixtures at 303.15, 313.15 and 323.15K are reported. The representation of the data by simple mixing rules is also studied.     

基于油藏实际的稠油层内水热催化裂解机理研究

开展了稠油层内水热催化裂解技术在胜利油田的先导实验,五口井平均周期单井增油653 t,稠油初期降黏率达79.8%,措施14周后降黏率仍大于62%。利用Brookfield DV-Ⅲ黏度计、ElementarVario EL III元素分析仪、Knauer K-700蒸气压渗透仪、Agilent 6890N气相色谱仪和EQUINOX 55傅里叶变换红外光谱仪等,对措施前后稠油的物化性质进行分析。结果表明,层内水热催化裂解后稠油黏度及平均分子量减小、轻烃含量增加、重质组分含量减少、氢碳原子比增加、杂原子含量减小。稠油层内裂解反应受催化剂体系、高温水及储层矿物因素控制,催化剂是促进稠油裂解的主要因素,供氢剂及分散剂等助剂有助于提高裂解效果,高温水的酸碱性质及储层矿物对稠油具有催化裂解作用。多因素协同作用下使稠油发生脱侧链、分子链异构、断链、加氢、开环、成环、脱硫等系列反应,使得稠油大分子分解成小分子物质,降低了稠油黏度,改善了稠油品质,证实该技术在现场应用中具有可行性。     

MRI investigation of granular interface rheology using a new cylinder shear apparatus

The rheology of granular materials near an interface is investigated through proton magnetic resonance imaging. A new cylinder shear apparatus has been inserted in the magnetic resonance imaging device, which allows the control of the radial confining pressure exerted by the outer wall on the grains and the measurement of the torque on the inner shearing cylinder. A multi-layer velocimetry sequence has been developed for the simultaneous measurement of velocity profiles in different sample zones, while the measurement of the solid fraction profile is based on static imaging of the sample. This study describes the influence of the roughness of the shearing interface and of the transverse confining walls on the granular interface rheology.     

On power-law fluids with the power-law index proportional to the pressure

In this short note we study special unsteady flows of a fluid whose viscosity depends on both the pressure and the shear rate. Here we consider an interesting dependence of the viscosity on the pressure and the shear rate; a power-law of the shear rate wherein the exponent depends on the pressure. The problem is important from the perspective of fluid dynamics in that we obtain solutions to a technologically relevant problem, and also from the point of view of mathematics as the analysis of the problem rests on the theory of spaces with variable exponents. We use the theory to prove the existence of solutions to generalizations of Stokes’ first and second problem.