粉煤灰空心微珠沸石化制备复合空心球

采用晶种静电吸附-诱导转化技术，成功地将选自工业废弃物粉煤灰的空心微 球转化为具有沸石/莫来石双层复合球壳结构的空心球，用XRD和SEM等手段对产物 进行了表征，并对球壳的转化机理进行了讨论。     

高硅沸石骨架结构及其稳定性的模拟计算(I)*

The lattice energy of a series of high-silica zeolites was determined using the lattice energy minimization method. The results were compared to the lattice energy of dense polymorphs of SiO2. All high-silica zeolites frameworks are only 30～67kJ•mol-1 less stable than α-quartz This may imply that there is little energy barrier to the formation of high-silica zeolites frame-works and explain the structural diversity observed for high-silica zeolites. The relationships of calculated lattice energies and framework Structures was disscussed. The results revealed a good linear relationship between framework density of these molecular sieves and all-silica framework lattice energies.     

Application of an Ion Beam Technique for the Design of Visible Light-Sensitive, Highly Efficient and Highly Selective Photocatalysts: Ion-Implantation and Ionized Cluster Beam Methods

As a new concept for the design of effective photocatalysts, an ion beam technology using accelerated metal ions, a metal ion implantation and an ionized cluster beam (ICB) method, have been applied to design unique photocatalysts. The metal ion implantation of TiO₂ and Ti-containing zeolites with highly accelerated metal ions (V⁺, Cr⁺, etc.) is useful in designing photocatalysts that can operate efficiently under visible light irradiation. Also, an ICB method with a low acceleration energy is useful in preparing transparent TiO₂ thin films on various types of substrates for the efficient photocatalytic degradation of pollutants diluted in water and air. The combination of the ICB method and metal ion implantation can develop the TiO₂ thin films that are able to operate not only under UV light but also under visible light irradiation.     

DRY METHOD SYNTHESIS OF PURE SILICEOUS FORM OF ZEOLITE ZSM-35

IntroductionZeoliteZSM-35isclassifiedasfcrricritc(FER)t\pc.x'hicllalsoincludesZSM-ZI.ZSM-38andFER.Zeolitesofthist}'pcha\lcrclatit'CI}UlldiscrinlinablcXRDpattcnlswhichindicatetheirsinlilarit\'illst,u.tu,.,I11.Thehighsiliceousfonllsofthesezeolitesarcgcllcra…     

改性ZSM—5分子筛在甲苯一段硝化中的应用

对ＮａＺＳＭ－５分子筛进行改性，在其表面引入铁，镁离子，用作硝硫混酸对甲苯一段硝化反应的催化剂，明显提高产物中对硝基甲苯的生成比例，研究了影响反应结果的因素。     

NixB/沸石催化剂的分散性和反应性

用晶内形成法制备了Ni_xB/沸石催化剂,用饱和氢化学吸附法结合TEM方法考察了负载金属的分散性,并研究了其己环烷脱氢反应性。结果表明,Ni_xB/沸石样品上负载金属的分散性高,金属粒径分布也相对集中;金属负载量、载体结构和性质以及Ni_xB的制备条件对负载金属的分散性有明显影响。Ni_xB/沸石样品呈现较好的环己烷脱氢反应性。     

Preparation and characterization of silicalite-1 membranes prepared by secondary growth of seeds with different crystal sizes

MFI-type zeolite particles of 0.1–1 μm in diameter were prepared by adjusting tetra-n-propylammonium hydroxide (TPAOH) and water contents in synthesis mixtures. Using those particles as seeds, MFI-type zeolite membranes were prepared on the surface of a porous mullite tube by secondary growth. The membranes were formed as polycrystalline zeolite layers on and inside the porous support, and the membranes were composed of the [h 0 h]-oriented crystallites. The membrane consisting of a-oriented crystallites could be also prepared. However, the a-oriented zeolite layers were not active on the permeation properties of butanes. Rather the size and loaded amount of the seed particles influenced on the permeation properties through the membranes. As a result, the n-C₄H₁₀/i-C₄H₁₀ permselectivity could be increased to 220 by adjusting the size and the loaded amount of particles. These results suggest that the number of loaded particles affects on the permeation properties through the membranes.     

新型重整催化剂的研究—Pt／BaKL型沸石中钡的作用

本文采用XRD,NH_3-TPD,IR以及TEM等方法考察了Pt/BaKL沸石中Ba~(2+)的作用。NH_3-TPD结果表明,交换Ba~(2+)后的L型沸石的酸性,由于阳离子的作用仅在弱酸范围内有些改变,但与载铂的沸石的催化活性无明显的对应关系。IR及XRD谱线表明,BaKL沸石中Ba~(2+)在最佳交换度(26.3%)时,随预培烧温度的提高,使Ba~(2+)处于沸石孔道中B、C、D位置,接近于最佳分布,此时IR谱线上1421cm~(-1)处有一新峰。当沸石负载铂后,因铂与Ba~(2+)的相互作用,新峰消失,导致铂粒在沸石上分布更加均匀;铂粒在1.5—3.0nm之间占有最大比例,使得Pt/BaKL沸石呈现芳构化活性及选择性高于Pt/KL沸石,分别为～98%和～95%。     

Liquid-phase hydration process of cyclohexene with zeolites

The liquid-phase hydration process of cyclohexene into cyclohexanol with zeolite is described. The characteristic of this industrial process is that fine particles of zeolite are used in a slurry system, which offers high productivity and a simple separation system. In this process, the hydrophobic property and shape selectivity of ZSM-5 are fully utilized so as to realize an economical industrial process.