基于MCM-41分子筛表面的镱离子印迹聚合物的制备及其性能

运用离子印迹技术,以3-氯丙基三乙氧基硅烷为锚定剂,将功能单体直链聚乙烯亚胺(PEI)接枝在MCM-41分子筛表面,选择镱离子作为模板离子,以环氧氯丙烷交联制备出基于MCM-41表面的镱离子印迹聚合物Yb(Ⅲ)-IIP-PEI/MCM-41,并以同样的方法制备非离子印迹聚合物(NIP-PEI/MCM-41)。 利用傅里叶变换红外光谱仪和扫描电子显微镜等技术手段对Yb³⁺印迹聚合物进行表征,采用静态吸附法确定了Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺的最佳吸附条件及选择性吸附性能。 结果表明,Yb(Ⅲ)-IIP-PEI/MCM-41和NIP-PEI/MCM-41的最大吸附量分别为229.93和99.27 mg/g;印迹材料对Yb³⁺的吸附符合Langmuir模型;吸附平衡在40 min的时候基本可以达到,可以利用准二级动力学模型来描述其吸附过程;Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺具有较强的选择性,同时也具有很好的重复使用性能。 成功地将MCM-41和离子印迹聚合物的优点结合起来,制备出一种对稀土Yb离子既有高吸附量又有高选择性的吸附材料,为进一步将其应用在处理实际废水,分离回收低浓度稀土废水中的稀土元素等方面打下了基础。     

NIR‐to‐NIR Two‐Photon Scanning Laser Microscopy Imaging of Single Nanoparticles Doped by YbIII Complexes

The photophysical and nonlinear optical properties of water‐soluble chromophore‐functionalised tris‐dipicolinate complexes [LnL₃]^3? (Ln=Yb and Nd) are thoroughly studied, revealing that only the Yb^III luminescence can be sensitized by a two‐photon excitation process. The stability of the complex in water is strongly enhanced by embedding in dispersible organosilicate nanoparticles (NPs). Finally, the spectroscopic properties of [NBu₄]₃[YbL₃] are studied in solution and in the solid state. The high brightness of the NPs allows imaging them as single objects using a modified two‐photon microscopy setup in a NIR‐to‐NIR configuration.     

Quantitative Determination of Octamethylcyclotetrasiloxane (D4) in Extracts of Biological Matrices by Gas Chromatography-Mass Spectrometry

Abstract

A method was developed and validated to measure octamethylcyclotetrasiloxane (D₄)^? quantitatively by gas chromatography-mass spectrometry (GC-MS) at low level in extracts of several biological matrices that include plasma, liver, lung, feces and fat from rats. The key to the successful determination lay in the use of extracts dried with anhydrous magnesium sulfate. This was necessary in view of the propensity of the methyl siloxane based GC-stationary phase to generate D₄ by its reaction with water present in the extracts. To enable quantiiation of D₄ at parts per billion (μg/L) levels, the base ion m/z 281 resulting from the loss of a methyl group from the parent molecule was selected for monitoring by SIM mode in GC-MS. The recovery of D₄ from any of the biological matrices was determined to be greater than 90% in three extractions. The D₄ response for the standards in GC-MS was linear (R² > 0.9900) and reproducible at concentrations ranging from 1—16,000 ng D₄/g solvent. Precision was less than 5%.     

Cork-based activated carbons as supported adsorbent materials for trace level analysis of ibuprofen and clofibric acid in environmental and biological matrices

In this contribution, powdered activated carbons (ACs) from cork waste were supported for bar adsorptive micro-extraction (BAμE), as novel adsorbent phases for the analysis of polar compounds. By combining this approach with liquid desorption followed by high performance liquid chromatography with diode array detection (BAμE(AC)-LD/HPLC-DAD), good analytical performance was achieved using clofibric acid (CLOF) and ibuprofen (IBU) model compounds in environmental and biological matrices. Assays performed on 30 mL water samples spiked at the 25.0 μg L(-1) level yielded recoveries around 80% for CLOF and 95% for IBU, under optimized experimental conditions. The ACs textural and surface chemistry properties were correlated with the results obtained. The analytical performance showed good precision (<15%), suitable detection limits (0.24 and 0.78 μg L(-1) for CLOF and IBU, respectively) and good linear dynamic ranges (r(2)>0.9922) from 1.0 to 600.0 μg L(-1). By using the standard addition methodology, the application of the present approach to environmental water and urine matrices allowed remarkable performance at the trace level. The proposed methodology proved to be a viable alternative for acidic pharmaceuticals analysis, showing to be easy to implement, reliable, sensitive and requiring low sample volume to monitor these priority compounds in environmental and biological matrices.     

Synthesis and Crystal Structure of Novel Mixed-metal Alkoxide Clusters of Ytterbium and Sodium: Yb4O4（OiPr）16Na12

The mixed-metal cluster Yb4O4(OiPr)16Na12 has been synthesized and structurally determined by IR, elemental analysis, and single-crystal X-ray diffraction. The crystal belongs to the cubic system, space group P23 with a = b = c = 13.9788(3), V = 2731.55(10)3 , Z = 1, Dc = 1.202 g/cm 3 , Mr = 1977.42, = 3.480 mm-1 , F(000) = 972, the final R = 0.0288 and wR = 0.1511 for 1677 observed reflections with Ⅰ > 2σ(Ⅰ). X-ray analysis reveals that Yb4O4 (OiPr)16Na12 is centrosym-metric and the structure contains four ytterbium metals and twelve sodium metals, and each ytterbium atom is coordinated by six oxygen atoms. In addition, an ancillary computational analysis of the optimized molecular unit was provided. The large energy gap (3.31 eV) between HOMO and LUMO indicates that the structure framework is particularly stable.     

Reactivity of ytterbium in liquid ammonia

A solution of metallic ytterbium in liquid ammonia reacts readily with various carbonyl complexes of metals to form the corresponding lanthanide carbonylmetallates. The reaction of an excess of Yb in liquid NH₃ with [CpFe(CO)₂]₂ gave (THF)₄Yb[Fe(CO)₂Cp]₂ in 42% yield. It was suggested that the resulting complex contains two equivalent Yb−Fe bonds. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1883–1885, October, 1997.     

Optical Activity in the Near‐IR Region: The λ=980 nm Multiplet of Chiral Yb3+ Complexes

We used a very simplified electrostatic model based on charge and polarizability of atoms and groups on an organic ligand around a lanthanide ion to predict the near‐infrared electronic circular dichroism (NIR ECD) spectra of Yb³⁺ (a monoelectronic ion). We tuned our method by using two widely different complexes. The first was the heterobimetallic species CsYb(hfbc)₄ [hfbc=(?)‐3‐heptafluorobutyrylcamphorate], in which the ligand is a diketonate and, as such, is endowed with a chromophore with strong UV absorption (π–π^*). Its oxygen atoms define a square antiprism, which provides a symmetric coordination polyhedron. The second system was Yb DOTMA [DOTMA=(1R,4R,7R,10R)‐α,α′,α′′,α′′′‐tetramethyl‐1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid], a chiral Yb analogue of Gd DOTA (DOTA=1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid), in which the ligand lacks relevant electronic transitions and provides a dissymmetric cage. The relative weights of dynamic (ligand polarization) and static contributions to Yb NIR ECD were evaluated, and the spectra appear to have been well predicted by theory through the introduction of a heuristic weight factor. To validate the approach and to confirm the value of the weight factor, we applied it to two other compounds, namely, Na₃Yb(BINOLate)₃ and Yb(BINOLAM)₃ [BINOLate=2,2′‐dihydroxy‐1,1′‐binaphthyl; BINOLAM=3,3′‐bis(diethylaminomethyl)‐1‐1′‐bi‐2‐naphthol].     

Laponite clay in homopolymer and tri-block copolymer matrices

Macromolecule/laponite nanomaterials were studied by DSC and X-ray diffraction techniques. The matrices are poly(ethylene) glycols at various molecular masses and poly(ethylene oxides)-poly(propylene oxides)-poly(ethylene oxides) tri-block copolymers. The latter were tuned by modulating the molecular masses, at constant hydrophilic/hydrophobic ratio, and the hydrophilicity. For all the investigated systems, the enthalpy of melting (ΔH _m) is nearly constant up to a given composition thereafter it increases monotonically reaching the value of the pure macromolecule. We proposed a model to interpret the DSC data. Briefly, it was invoked a mechanism of interaction following which some segments of the adsorbed macromolecule are anchored to the laponite (RD) particles and the remaining segments are radiating away from the surface. The portion of the macromolecule in contact with RD does not contribute to ΔH _m whereas that radiating away from the clay does. Once that the RD surface is saturated, the excess of the macromolecule behaves like the pure one. The proposed model allowed to compute successfully the ΔH _m values. The X-ray diffraction experiments ruled out the polymer intercalation between the silicate sheets.     

Solid-phase extraction techniques based on nanomaterials for mycotoxin analysis: An overview for food and agricultural products

Mycotoxin contamination is a globally concerned problem for food and agricultural products since it may directly or indirectly induce severe threats to human health. Sensitive and selective screening is an efficient strategy to prevent or reduce human and animal exposure to mycotoxins. However, enormous challenges exist in the determination of mycotoxins, arising from complex sample matrices, trace-level analytes, and the co-occurrence of diverse mycotoxins. Appropriate sample preparation is essential to isolate, purify, and enrich mycotoxins from complicated matrices, thus decreasing sample matrix effects and lowering detection limits. With the cross-disciplinary development, new solid-phase extraction strategies have been exploited and integrated with nanotechnology to meet the challenges of mycotoxin analysis. This review summarizes the advance and progress of solid-phase extraction techniques as the methodological solutions for mycotoxin analysis. Emphases are paid on nanomaterials fabricated as trapping media of solid-phase extraction techniques, including carbonaceous nanoparticles, metal/metal oxide-based nanoparticles, and nanoporous materials. Advantages and limitations are discussed, along with the potential prospects.