Study on the temperature dependence of BGO light yield

The temperature dependence of BGO coupled with photomultiplier tube R5610A-01 was studied in the range of-30–30℃. The temperature coefficient of the BGO and R5610 A as a whole was tested to be-1.82%/℃. And the temperature coefficient of the gain of the R5610 A is-0.44%/℃ which was tested in the same situation using a blue LED. Thus the temperature coefficient of BGO's light yield can be evaluated as-1.38%/℃.     

Measuring partial fluorescence yield using filtered detectors

Typically, X‐ray absorption near‐edge structure measurements aim to probe the linear attenuation coefficient. These measurements are often carried out using partial fluorescence yield techniques that rely on detectors having photon energy discrimination improving the sensitivity and the signal‐to‐background ratio of the measured spectra. However, measuring the partial fluorescence yield in the soft X‐ray regime with reasonable efficiency requires solid‐state detectors, which have limitations due to the inherent dead‐time while measuring. Alternatively, many of the available detectors that are not energy dispersive do not suffer from photon count rate limitations. A filter placed in front of one of these detectors will make the energy‐dependent efficiency non‐linear, thereby changing the responsivity of the detector. It is shown that using an array of filtered X‐ray detectors is a viable method for measuring soft X‐ray partial fluorescence yield spectra without dead‐time. The feasibility of this technique is further demonstrated using α‐Fe₂O₃ as an example and it is shown that this detector technology could vastly improve the photon collection efficiency at synchrotrons and that these detectors will allow experiments to be completed with a much lower photon flux reducing X‐ray‐induced damage.     

Water‐Dispersible Silicon‐Quantum‐Dot‐Containing Micelles Self‐Assembled from an Amphiphilic Polymer

The dispersion of silicon quantum dots (Si QDs) in water has not been established as well as that in organic solvents. It is now demonstrated that the excellent dispersion of Si QDs in water with photoluminescence (PL) quantum yields (QYs) comparable to those for hydrophobic Si QDs can be realized by combining the processes of hydrosilylation and self‐assembly. Hydrogen‐passivated Si QDs are initially hydrosilylated with 1‐dodecence. The toluene solution of the resulting dodecyl‐passivated Si QDs is mixed with the water solution of the amphiphilic polymer of Pluronic F127 to form an emulsion. Dodecyl‐passivated Si QDs are encapsulated in the micelles self‐assembled from F127 in the emulsion. The size of the Si‐QD‐containing micelles may be tuned in the range from 10 to 100 nm. Although self‐assembly in the emulsion causes the PL QY of Si QDs to decrease, after a few days of storage in ambient conditions, Si QDs encapsulated in the water‐dispersible micelles exhibit recovered PL QYs of ≈24% at the PL wavelength of ≈680 nm. The intensity of the PL from Si QDs encapsulated in the water‐dispersible micelles is >90% of the original value after 60 min ultraviolet illumination, indicating excellent photostability.     

芴酮引发光接枝改性LDPE膜的研究

采用紫外光引发接枝表面改性的方法,以芴酮(FL)为引发剂,在低密度聚乙烯(LDPE)薄膜表面上接枝丙烯酸(AA)、甲基丙烯酸(MAA)、丙烯酸甲酯(MA)、甲基丙烯酸甲酯(MMA)、丙烯酰胺(AM)等单体,以赋予薄膜表面新的化学性质.考察了引发剂浓度、紫外光的辐照时间、辐照强度、单体种类对LDPE薄膜接枝程度的影响.结果表明,在一定范围内,增加芴酮浓度,可以提高单体的接枝率,但当芴酮浓度达到5%时,接枝率反而下降.延长辐照时间至4 min和提高紫外光的辐照强度达100 W/m2,均有利于接枝反应的进行.不同单体在LDPE膜上的接枝能力与单体的活性、单体与基材的相容性等因素有关.接枝后,LDPE与水的接触角下降程度不仅与单体在膜上的接枝量有关,还与接枝单体的亲水性能密切相关.     

氘氘中子产额铟活化诊断方法

提出了活化法测量DD中子产额的实验方法,该方法可提高DD中子产额测量的精度。方法基于铟同位素115In与DD中子的非弹性散射反应,活化反应释放的射线被HPGe探测器记录,根据活化系统标定灵敏度推算出中子产额。分析了探测器记录的活化射线数与中子产额间的关系。介绍了一套活化测量的系统设计。通过蒙特卡罗方法模拟了活化样品出射的射线数与样品厚度的关系,模拟结果表明:样品厚度取为1 cm可兼顾活化效率和测量精度。在加速器上对铟活化样品进行了标定实验,实验结果表明:在聚变中子产额大于2109的实验中可使用铟活化诊断方法,中子产额测量的相对标准误差在10%以内。随着聚变中子产额的不断提高,铟活化测量中子产额的精度可进一步提高。     

飞秒激光作用下质子产额及空间分布

在超短超强激光装置SILEX-Ⅰ上,利用HD810辐射变色膜在靶背法线方向测量了质子产额及空间分布。测量结果显示:光学密度与质子流量密切相关,光学密度越大,质子流量就越大;当C8H8厚度相同,Cu厚度增加时,质子产额随辐射变色膜的光学密度平均值减小而减小;当靶相同,激光功率密度越小时,光学密度平均值就越小,则质子产额也越小;实验中还得到了质子呈环状、成丝和圆盘状结构的空间分布,该空间分布的大小与激光焦斑大小无关。     

Kinetic investigation on carbamate formation from the reaction of carbon dioxide with amino acids in homogeneous aqueous solution

The kinetics of carbamate formation from the reaction of carbon dioxide with α‐amino acids in D₂O was first investigated by means of nuclear magnetic resonance spectroscopy. Potassium carbonate was used as the CO₂ source. For each amino acid, the maximum carbamate yield, the apparent rate constant for the carbamate formation k_app, and the rate constants for the formation k₁ and the breakdown k_?1 of the carbamate were estimated. Plots of log k₁ or log k_?1 versus pK_a of amino acids indicated that the formation rate k₁ increased with the basicity (pK_a) of amino acid, while the decomposition rate k_?1 decreased. A Br?nsted β value of 0.39 was obtained from the former plot, being in good agreement with the previously reported ones (0.26–0.43). The observed negative pK_a dependence of log k_?1 (Br?nsted α = 0.34) is reasonable, because the carbamate decomposition is acid‐catalyzed and the steady‐state concentration of H⁺ should be higher for weaker basic amines. The charge (σ) and the lone‐pair energy (E_N) at the nitrogen atom of the amino group were calculated. Although log k₁ correlated with σ and E_N, log k_?1 was unrelated with both of these parameters. Considering that the carbamate formation (k₁) is not only base‐catalyzed but should also be promoted by the nucleophilicity of the amino nitrogen, its correlation with σ and E_N in addition to pK_a is rational. The irrelevance of log k_?1 to σ and E_N is not surprising, because σ and E_N are not a direct measure of [H⁺] of the solution. Copyright © 2011 John Wiley & Sons, Ltd.     

Comparison of Lu3Al5O12:Pr and Bi4Ge3O12 scintillators for gamma-ray detection

The scintillation properties of Lu₃Al₅O₁₂:Pr³⁺ (LuAG:Pr) single crystal grown by the Czochralski method with praseodymium concentration of 0.19 mol% were investigated. For a comparison, a good quality Bi₄Ge₃O₁₂ (BGO) single crystal grown by Bridgman method was also studied. The light yield and energy resolution were measured using photomultiplier tube (XP5200B PMT) readout. Moderate light yield of 15,900 photons per MeV was measured for the LuAG:Pr(0.19%) crystal. For 662 keV gamma rays (¹³⁷Cs source), an energy resolution of 6.5% obtained for LuAG:Pr(0.19%) is much better than that of 9.0% obtained for BGO. The light yield non-proportionality and energy resolution versus energy of gamma rays were measured and the intrinsic resolution of the crystals was determined after correcting the measured energy resolution for PMT statistics. The LuAG:Pr(0.19%) showed a good proportionality of the light yield within 5% over the energy range from 1274.5 keV down to 32 keV, which is much better than that of 14% for BGO. The photofraction was determined at 320 and 662 keV for both crystals and compared with the ratio of the cross-sections for the photoelectric effect to the total one calculated using WinXCOM program.     

An accurate determination of the K‐shell X‐ray fluorescence yield of silicon

A measurement of the K‐shell fluorescence yield of silicon is undertaken in which identified sources of systematic errors in previous measurements are reduced or eliminated. This enables a stringent test of the only two sets of theoretical predictions available for atomic numbers less than 18. Our result ω_K = 0.0495 ± 0.0015 is very slightly lower than the non‐relativistic Hartree‐Fock‐Slater (HFS) prediction of 0.0514. This stringent test of the HFS predictions helps to refine the fundamental parameter database of the X‐ray fluorescence analysis technique, whose importance for light elements is increasing. Our work indicates the need for new theoretical calculations of K‐shell fluorescence yields for these elements. Copyright © 2012 John Wiley & Sons, Ltd.     

Fluorescence Quantum Yields of Tryptophan and Tyrosine

Abstract

Fluorescence quantum yields (Q) for tyrosine, tryptophan, and phenylalanine in water at 23° determined by the comparative method using a quinine standard were found to be 0.14, 0.13, and 0.024, respectively. Similar values were obtained with phenol as the standard. The numbers are much lower than those literature values which have been widely used to calculate protein fluorescence quantum yields. Possible reasons for the discrepancies are discussed. The quantum yields of isomeric tyrosines and fluorophenylalanines are also reported.