Zur Struktur zweier Arsen- und Antimontricarboxylate

Zusammenfassung Arsen-tris(2,2-dimethylpropionat) (1) kristallisiert monoklin in der Raumgruppe P2₁/n mita=926.2,b=2158.6,c=983.7 pm, =94.92° undZ=4. As hat gegenüber O die Koordinationszahl 3+3. Antimontripropionat (2) kristallisiert monoklin in der Raumgruppe P2₁/c mita=930.2,b=863.0,c=1575.2 pm, =90.27 undZ=4. Die Moleküle sind intermolekular zu Ketten verknüpft, wodurch Sb die Koordinationszahl 3+3 (+3) erreicht.

---

Structure of arsen(III) and antimony(III) carboxylates

Summary Arsen-tris(2,2-dimethylpropionate) (1) crystallizes monoclinic in the space group P2₁/n witha=926.2,b=2158.6,c=983.7 pm, =94.92°, andZ=4. As has a coordination number of 3+3. Antimony tripropionate (2) crystallizes monoclinic in the space group P2₁/c witha=930.2,b=863.0,c=1575.2 pm, =90.27, andZ=4. The molecules are bridged to chains; therefore, Sb reaches the coordination number 3+3 (+3).

     

Cationic amino-containing N-isopropyl- acrylamide–styrene copolymer latex particles: 1-Particle size and morphology vs. polymerization process

 Cationic hydrophilic copolymer latexes were synthesized at 70 °C either by batch or two-step emulsifier-free emulsion poly-merization of styrene (St), N-iso-propylacrylamide (NIPAM), and aminoethylmethacrylate hydro-chloride (AEM) using 2,2′-azobis (2-amidinopropane) dihydrochloride as initiator. At first, batch polymerization kinetics were followed by gas chromatography (GC), revealing that NIPAM rapidly homopolymerized, before the polymerization of styrene had started. Particle size analysis by quasi-elastic light scattering (QELS) and transmission electron microscopy (TEM) showed that monodispersed particles were obtained with the formation of a poly[NIPAM] rich shell. Adding a small amount of the cationic monomer caused a strong decrease of the particle size without affecting the size monodispersity. When a shot process was used, a narrow particle size distribution was maintained, provided that the monomer addition was performed at a relatively high conversion of the first batch step. The poly[NIPAM] rich shell layer was larger with the shot process, but increasing the amino-containing monomer in the recipe resulted in a dramatic decrease of the thickness. Combination of transmission, scanning and atomic force microscopy techniques showed that these hydrophilic particles exhibited odd-shaped structures, the unevenness being dependent upon the performed process. Kinetic data and particle morphology information were inferred for discussion of the polymerization mechanism of this system. Received: 21 August 1997 Accepted: 22 October 1997     

Heat transfer from a rarefied plasma flow to a metallic or nonmetallic particle

Heat transfer from a plasma flow to a metallic or nonmetallic spherical particle is studied in this paper for the extreme case of free-molecule flow regime. Analytical expressions are derived for the heat flux due to, respectively, atoms, ions, and electrons and for the floating potential on the sphere exposed to a two-temperature plasma flow. It has been shown that the local or average heat flux density over the whole sphere is independent of the sphere radius and approximately in direct proportion to the gas pressure. The presence of a macroscopic relative velocity between the plasma and the sphere causes substantially nonuniform distributions of the local heat flux and enhances the total heat flux to the sphere. The heat flux is also enhanced by the gas ionization. Appreciable difference between metallic and nonmetallic spheres is found in the distributions along the oncoming flow direction of the floating potential and of the local heat flux densities due to ions and electrons. The total heat flux to the whole sphere is, however, almost the same for these different spheres. For a fixed value of the electron temperature, the heat flux decreases with increasing temperature ratio T_e/T_h.     

Determination of the micelle-solute association constants of some benzene and naphthalene derivatives by micellar high performance liquid chromatograph

Summary The interaction of some benzene and naphthalene derivatives with sodium dodecyl sulphate, hexadecyltrimethylmmonium bromide and polyoxyethylene [23] dodecanol micelles has been evaluated by high operformance liquid chromatography using micellar mobile phases. The micelle-solute association constants have been obtained for the compounds investigated. Good correlation between free energy of transfer for water-micelles and for octanol-water has been observed.     

Characteristics of vinyl iodide microwave plasma etching of GaAs/AlGaAs and InP/InGaAs heterostructures

Vinyl iodide (C₂H₃I) microwave discharges with additions of H₂ and Ar are found to provide faster etch rates than conventional CH₄/H₂/Ar discharges for InP, InGaAs, GaAs, and AlGaAs. This is a result of the relatively high volatilities of indium, gallium, and aluminum iodide species. The etched features are smooth and anisotropic over a wide range of do self-biases (–150 to –350 V), process pressures (1–20mTorr), and microwave powers (150–500 W). The polymer that forms on the mask during the plasma exposure can be readily removed in O₂ discharges. Electron spectroscopy for chemical analysis (ESCA) showed that the etched surfaces are slightly deficient in the group V elements under most conditions, but changes to the optical properties of the semiconductors are minimal. No defects are visible by transmission electron microscopy (TEM) in GaAs or InP samples etched at dc biases –250 V.     

Liquid chromatography of benzene derivatives on a porous methacrylate copolymer containing epoxy groups

Summary The retention of benzene derivatives with nonpolar and polar substituents on a porous methacrylate copolymer containing epoxy groups using both nonpolar and polar eluents was investigated. When n-hexane is used as the eluent, the retention of n-alkylbenzenes and polymethylbenzenes is weaker than that of benzene. In the case of benzene derivatives containing polar functional groups their capacity ratios (k) on this porous polymer increases approximately linearly with the increase of the adsorbate molecules dipole moment. The retention characteristics of the methacrylate copolymer were compared with that of a styrene-divinylbenzene copolymer and silica gels with a hydroxylated surface and with a surface modified by chemically bonded alkylsilyl groups.     

Highly diastereoselective synthesis of new, carbostyril-based type of conformationally-constrained β-phenylserines

We have demonstrated that the readily available amido-keto compounds 5, with prearranged carbonyl and glycine moieties, under strongly basic conditions easily undergo complete and highly diastereoselective cyclization, affording a generalized and practical access to the conformationally constrained phenylserine derivatives 4. High chemical yields, virtually complete diastereoselectivity combined with the operational convenience of the experimental procedures render this method useful for preparation of these diastereomerically pure derivatives.     

Synthesis and Structure Investigations of Potential Sedative and Anticonvulsant Hydroxy- and Acetoxy-N-(3-oxobutyl)-pyrido[2,3-d]pyridazinonesa

Summary.  Novel N-(3-oxobutyl)-hydroxy- and acetoxypyrido[2,3-d]pyridazinones were synthesized and tested in vivo for their sedative and anticonvulsant activity. The Michael-type reaction of quinolinic acid hydrazide and methyl vinyl ketone afforded a mixture of two isomers, 5-hydroxy-N ⁷-(3-oxobutyl)-pyrido[2,3-d]pyridazin-8(7H)-one and 8-hydroxy-N ⁶-(3-oxobutyl)-pyrido[2,3,-d]pyridazin-5-(6H)-one, in a ratio of 2:1 which were separated by crystallization. Subsequent acetylation of both isomers yielded the corresponding 5- and 8-acetoxy compounds. The structures of the compounds were proven and completely assigned on the basis of ¹H, ¹³C, ¹⁵N NMR, and 1D NOE difference spectra as well as 2D C,H-correlation experiments. Preliminary pharmacological tests showed low acute toxicity with a LD ₅₀ > 1000 mg/kg in the mouse and sedative activity for the title compounds. 5-Acetoxy-N ⁷- (3-oxobutyl)-pyrido[2,3-d]pyridazin-8(7H)-one displayed a borderline anticonvulsant activity in the metrazole test model. Corresponding author. E-mail: edith.goessnitzer@uni-graz.at Received March 20, 2002; accepted April 3, 2002     

A decomposition procedure for the determination of arsenic in marine samples

The use of wet and dry ashing procedures to decompose marine biological tissues and to degrade organoarsenic compounds to inorganic arsenic for analysis by zinc-column arsine generation and atomic-absorption spectrophotometry was investigated. Wet ashing with nitric, sulphuric and perchloric acids (10:2:3 v/v) released the largest percentage of arsenic from fish tissue and quantitatively degraded methylated and other organoarsenic compounds to inorganic arsenic. The arsenic concentrations found when standard reference materials were ashed with this acid mixture were in agreement with the certified values.     

Biologisch aktive 3,3-Dimethylbicyclo[2.2.2]octane: Synthesen in der Isocamphanreihe, 35. Mitt.

Summary The bicyclo[2.2.1]- and [2.2.2]-systems are part of numerous biological active substances. Continuing our syntheses in the isocamphane series the homologous isocamphanes of mecamylamine (1 a) and of the fungicidal bicyclic compound2 were synthesized. Furthermore the syntheses ofE-homoisosantalene (15) andE,E-homoisosantalol (16) are described.