利用CCD光电测量系统测量杨氏弹性模量

提出一种测量微小伸长量的光电测量方法,即利用CCD光电测量系统将单缝衍射的光强分布转换为电信号,经过计算机处理后输出光强分布曲线,从相邻波谷读出衍射条纹间隔,通过软件的简单操作直接输出测量结果.实现了数据采集及运算结果的实时化、半自动化,并克服了传统方法的测量困难和数据处理的复杂计算.利用这一方法测定了钢丝的杨氏弹性模量,与标称值符合得较好.     

Crystal structure and magnetic ordering of RNi Si compounds

The element distributions and the magnetic ordering behaviour of compounds RNi₁₀Si₂ (R = Tb, Dy, Ho, Er, Tm) have been studied by neutron powder diffraction down to temperatures of 1.6 K. The compounds crystallize in an ordered variant of the ThMn₁₂ structure type in the tetragonal space group P4/nmm. An ordered 1:1 distribution of Ni and Si on sites 4d and 4e, respectively, corresponds to a modulation vector [0, 0, 1] with respect to the space group I4/mmm of the ThMn₁₂ structure. TbNi₁₀Si₂ orders antiferromagnetically below T _N = 4.5 K with a magnetic propagation vector of [0, 0, 1/2]. The magnetic Tb moments, 8.97(2) /Tb atom at 1.6 K, are aligned along the c-axis. The Ni sites in TbNi₁₀Si₂ do not carry any ordered magnetic moments. The compounds with R = Dy, Ho, Er, and Tm are paramagnetic down to 1.6 K and 3.0 K, respectively. Received 10 July 2002 / Received in final form 12 September 2002 Published online 29 October 2002     

Design and Cold Tests of Asymmetric Quasioptical Resonators

This paper presents the design and test of asymmetric quasioptical resonators for gyrotron applications, where most of the diffraction output coupling comes from the smaller of two mirrors. A computer code based on scalar diffraction theory is used to calculate the resonator losses and the electric field near the mirrors. Resonators with mirror separations approaching confocal have reduced side lobes in the diffraction patterns, which should allow for better power transmission and focusing. Cold tests have been performed at 94 and 141 GHz to measure the quality factor of the asymmetric resonators as a function of mirror separation and mirror misalignment. Typical resonator parameters include 65 cm mirror separation, 1-3% output coupling and 85% of the losses from the small mirror. A half-symmetric resonator with one flat and one curved mirror has also been investigated. The calculated values of Q are in reasonably good agreement with the cold test measurements.     

电磁脉冲模拟器前后过渡段锥角设计

 采用矩量法并结合快速多极子方法,对电磁脉冲模拟器内部场波形进行了数值计算,寻找过渡段结构与电磁脉冲波形等的关系,从理论上对模拟器前后过渡段的锥角进行了优化。结果表明：存在前后过渡段的结构都会激起场强沿传播方向的分量;前过渡段主要对工作区域场波形的上升沿产生影响,当前锥角减小时,场波形的上升时间先减小再缓慢增加;后过渡段主要对场波形的衰减部分产生影响,使场波形的衰减部分随着后锥角的增大而产生严重畸变。最终优化设计的电磁脉冲模拟器前过渡段的锥角为15°,后过渡段的锥角为20°,其仿真得到的波形较光滑,没有出现振荡及明显的畸变。     

碳化硅压腔和高压下的中子衍射

使用宝石级碳化硅晶体作为压砧材料，成功研制出了碳化硅压腔（MAC），并应用全景式MAC进行了高压下物质的中子衍射实验研究。结果表明，MAC是一种既能产生高的压力又具有大的高压样品室的装置，特别适合于高压下的中子衍射研究。     

光的干涉衍射综合实验仪

根据传统的光的干涉衍射实验装置存在的不足,研制出了光的干涉衍射综合实验仪．将光学元件放置在同一小型光学平台上,按照实验需要组合成相应仪器．该实验仪既可以用于光学演示实验,也可以作为光学专用的实验仪器。     

动态激光衍射法测量细丝直径

基于夫琅禾费衍射理论和巴比涅互补原理,提出了利用激光衍射对细丝直径进行动态测量的方法.该方法具有测量精度高、速度快、非接触、使用方便且易于微机联接实现自动化测量等优点.     

超声光栅实验及其多普勒频移的一种简单研究方法

采用光子学方法,对超声光栅衍射实验和实验中出现的多普勒频移现象进行了研究,所得结论与采用光的波动性观点的惠更斯-菲涅耳原理及傅里叶变换等常规方法相同.该方法进一步加深了对衍射的本质和光的粒子性的理解并对光子的信息传递能力有初步的认识.     

六方相InGaN外延膜的显微Raman散射

用X射线衍射(XRD)技术和显微Raman散射方法对金属有机化学气相沉积(MOCVD)法生长的六方相In_xGa_1-xN薄膜样品进行了研究，观察到了相分离现象和LO声子-等离子耦合模(LPP⁺)，讨论了In_xGa_1-xN的A₁(LO)模被屏蔽的主要物理机制.同时，对Raman谱中E₂和A₁(TO)声子模进行了分析和讨论.在In_xGa_1-xN样品的低温Raman谱中还观察到单电子跃迁产生的Raman散射信号. 关键词： Raman散射 X射线衍射 相分离 应力 LO声子-等离子耦合     

Synthesis and characterisation of cadmium titanium oxide thin films by sol-gel technique

Crack free, dense and transparent CdTiO₃ thin films have been prepared by sol-gel technique using titanium butoxide and cadmium acetate. The formation of the CdTiO₃ phase started from 500°C annealing temperature onwards. The complete orthorhombic structure of CdTiO₃ was formed on Silicon (100) substrate at an annealing temperature of 600°C for 5 h. As the annealing temperature increased from 600 to 700°C, we have observed the cadmium silicate phase at the interface of Si and CdTiO₃ phase. Structural, morphological and elemental evolution of these CdTiO₃ thin films produced by sol-gel synthesis were characterised by grazing incidence X-ray diffraction (GIXRD), tapping mode atomic force microscopy (TMAFM), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) respectively.