饱和含混多孔介质中环绕水平圆柱的自然对流

本文运用达西流模型，对饱和含湿多孔介质中环绕水平等温圆柱发生的自然对流进行了数值模拟和分析。流函数和温度分布采用傅里叶级数的形式，以联立求解二维流动的控制方程组，傅里叶级数项的系数由一维常微分方程的解得到。文中同时给出局部和平均努谢尔数随修正瑞利数的变化关系以及修正瑞利数处在０．１～１０范围内时二维流场和温度场分布。     

LDV进行湿蒸汽两相流流速测量的试验研究

ＬＤＶ进行湿蒸汽两相流流速测量的试验研究李秀云，张华，隋剑平，薛祖绳（吉林电力职工大学动力系长春１３００２２）（东北电力学院吉林１３２０１２）关键词：激光，湿蒸汽，测量一、前言在湿蒸汽两相流的研究中，两相流流场的测量是最为复杂的问题之一，常规测试方法...     

飞机环境控制系统的焓参数匹配方法

提出了一种飞机环境控制系统性能参数匹配的焓参数匹配法,该方法尤其适用于有相变换热器的环境控制系统。以某型号飞机的环境控制系统为例进行了对比计算,说明了新方法比传统方法简单可靠。此外,应用焓参数匹配的基本思想和水蒸发的物理机理,提出了当量温降法与等温蒸发法处理初级热交换器冷边的喷水效应。     

Evidence for H2 at high pressure in the silicon nanocavities after dipping in HF solution

The immersion in HF solutions of silicon containing nanocavities (produced by the annealing at high temperature, 950 °C, of silicon implanted with helium at high fluence, 2 × 10¹⁶ cm⁻²) results in the injection of hydrogen in an infrared-mute state (most likely H₂) into the nanocavities. The pressure achieved in the cavities is sufficiently high to stabilize the hydrogen coverage of the inner surfaces at temperatures exceeding by 200 °C the one of complete desorption from the outer surface.     

Synthesis of (Mg0.476Mn0.448Zn0.007)(Fe1.997Ti0.002)O4 powder and sintered ferrites by high energy ball-milling process

(Mg_0.476Mn_0.448Zn_0.007)(Fe_1.997Ti_0.002)O₄ nanocrystalline powder prepared by high energy ball-milling process were consolidated by microwave and conventional sintering processes. Phases, microstructure and magnetic properties of the ferrites prepared by different processes were investigated. The (Mg_0.476Mn_0.448Zn_0.007)(Fe_1.997Ti_0.002)O₄ nanocrystalline powder could be prepared by high energy ball-milling process of raw Fe₃O₄, MnO₂, ZnO, TiO₂ and MgO powders. Prefired and microwave sintered ferrites could achieve the maximum density (4.86 g/cm⁻³), the average grain size (15 μm) was larger than that (10 μm) prepared by prefired and conventionally sintered ferrites with pure ferrite phase, and the saturation magnetization (66.77 emu/g) was lower than that of prefired and conventionally sintered ferrites (88.25 emu/g), the remanent magnetization (0.7367 emu/g) was higher than that of prefired and conventionally sintered ferrites (0.0731 emu/g). Although the microwave sintering process could increase the density of ferrites, the saturation magnetization of ferrites was decreased and the remanent magnetization of ferrites was also increased.     

Fabrication of 550 nm gratings in fused silica by laser induced backside wet etching technique

A series of 550 nm spacing gratings were fabricated in fused silica by laser induced backside wet etching (LIBWE) method using the fourth harmonic of a Q-switched Nd:YAG laser (wavelength: λ = 266 nm; pulse duration: FWHM = 10 ns). During these experiments we used a traditional two-beam interference method: the spatially filtered laser beam was split into two parts, which were interfered at a certain incident angle (2θ = 28°) on the backside surface of the fused silica plate contacting with the liquid absorber (saturated solution of naphthalene-methyl-methacrylate c = 1.85 mol/dm³). We studied the dependence of the quality and the modulation depth of the prepared gratings on the applied laser fluence and the number of laser pulses. The surface of the etched gratings was characterized by atomic force microscope (AFM). The maximum modulation depth was found to be 180-200 nm. Our results proved that the LIBWE procedure is suitable for production of submicrometer sized structures in transparent materials.     

Novel Experimental Technique for the Determination of Monomer Droplet Size Distribution in Miniemulsion

Summary: The lack of accurate knowledge for measuring monomer droplet size and droplet size distribution has hampered the further progress of miniemulsion polymerization. Monomer droplet size is probably the most important characteristics of a miniemulsion, influencing the miniemulsion stability and the nucleation mechanism. To date, several experimental techniques have been tested to measure miniemulsion droplet size, but none are convenient and accurate. This work presents a novel experimental technique, using a powerful new scanning transmission electron microscopy (STEM) imaging system, which allows transmission observations of wet samples in an environmental scanning electron microscopy (ESEM). This new imaging technique is a useful technique to directly measure droplet size and droplet size distribution.

Miniemulsion droplets in dark field wet STEM imaging conditions.     

Application of Catalytic Wet Air Oxidation to Treatment of Landfill Leachate on Co／Bi Catalyst

Catalytic wet air oxidation(CWAO) was employed to reduce the organic compounds in landfill leachate and the effects of temperature, oxygen pressure, catalyst dosage, and concentration of the organic compounds on the TOC and CODcr removal rates were studied. The degradation kinetics of landfill leachate was also investigated and an exponential experiential model consisting of four influential factors was established to describe the reduction of the organic compounds in the landfill leachate. Meanwhile, the GC-MS technique was used to detect the components of the organic intermediates for the inference of the decomposition mechanisms of the organic compounds in landfill leachate. The results reveal that the reaction temperature and the catalyst dosage are the most important factors affecting the degradation reaction of the organic compounds and that the principal intermediates confirmed by GC-MS are organic acids at a percentage of more than 88% with no aldehydes or alcohols detected. The decomposition mechanisms of the organic compounds in landfill leachate were inferred based on the GC-MS information as follows;the activated gas phase O2 captured the hydrogen of the organic pollutants to produce free radicals, which then initiated the catalytic reaction. So most of the organic compounds were oxidized into CO2 and H2O ultimately. In general, catalytic wet air oxidation over catalyst Co3O4/Bi2O3 was a very promising technique for the treatment of landfill leachate.     

Sputtering and backscattering of keV light ions bombarding random targets

The fission fragment fluence required to render CaUO₄, Na₂U₂O₄, MgUO₄, Sr₂U₃O₁₁ and u₃O₈ x-ray amorphous was deduced as ～5 × 10¹⁵ events cm³. Significant annealing of the structural damage occurred in the 300–-500°C range.     

流固耦合系统湿模态正交性的统一证明

本文基于Ｈａｍｉｌｔｏｎ原理和线性势流理论，严格证明了三维流固耦合系统湿模态的广义正交关系，并给出了运动方程的解耦条件。本文所用的推导方法由于不涉及具体复杂的微分算子，较之前入所用的方法具有明显的优越性。