稀土在低硫铌钛钢中的作用

在实验条件下采用50kg真空感应炉炼和两段控制轧制工艺，并采用WE－60型万能拉伸试验机，JB－30B型冲击试验机，MM6型及OLYMPUS－PME3型光学金相显微镜，IBAS－2000图相分析等手段研究了稀土对低硫铌钛钢性能，组织及夹杂物的影响。在低硫铌钛钢中的试验结果表明，稀土元素的加入使力学性能变化各异，它使钢的横向屈服点和抗拉强度先下降而后上升；延伸率则无下降而后上升；稀土对钢的横向冲击功则表现为先上升而后下降，并且在－20℃以上，适量的稀土加入可以明显改善其冲击功的各向异性；稀土的加入并不能改变钢的显微组织类型，钢的组织为铁素体＋珠光体，但稀土会使钢中珠光体数量增加，铁素体数量减少，在钢中夹杂物方面，稀土加入则表现为它一方面 化钢液，使钢中夹杂物数量减少，另一方面是使钢中夹杂物的颗粒球化，细化和弥散化，从而改善夹杂物的分布。     

液-液萃取电感耦合等离子体质谱法测定天然水中痕量稀土元素

建立了以单、二（2－乙基己基）磷酸酯混合螯合剂的庚烷溶液作为萃取剂，6.0mol/L HCl反萃取预分离富集，In和Rh做内,ICP-MS测定天然水中15种稀土元素的分析方法。方法的富集倍数为200倍，各元素的检出限范围在0.01-1.8ng/L之间，相对标准偏差RSD＜5％，萃取回收率＞93％。     

Thermal decomposition of rare earth element enanthates

The conditions of formation of Y, La and lanthanide (from Ce(III) to Lu) enanthates were worked out, their composition and their solubilities in water at 291 K were determined, and the conditions of their thermal decomposition were studied. They were prepared as crystalline solids with general formula Ln(C₇H₁₃O₂)₃·nH₂O, wheren=2–10. On heating, they decompose in two or three steps. They first lose some water molecules and then decompose to the oxides directly (salts of Y and heavy lanthanides) or via the intermediate formation of Ln₂O₂CO₃ (salts of La, Pr, Nd, Sm and Eu). Only yttrium enanthate dihydrate loses 2 water molecules on heating to form an anhydrous complex, which decomposes directly to Y₂O₃. The temperatures of dehydration are similar for all complexes (323–343 K), while the temperatures of oxide formation vary irregularly from 823 K for CeO₂ to 1078 K for La₂O₃.     

Thermal and photoluminescence properties of hydrated YPO4:Eu nanowires

In this work, we used the solution precipitation route to synthesize Eu³⁺-doped YPO₄·nH₂O nanowires. The structure, morphology, composition, thermal behavior, and photoluminescence of as-synthesized product were characterized by X-ray diffraction (XRD), thermogravimetric and differential thermal analysis (TG/DTA), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopic (FE-SEM) and photoluminescence (PL) spectra. The dependence of the structure, morphology, composition and luminescent properties on the thermal treatment was investigated. The results indicate that the aqueous synthesis has a better control on the structure, morphology, composition of the products, and that the heat treatment induces the transitions of the structure, composition, and luminescent properties.     

氯化钪-氯化钠-氯化钾熔盐制备新工艺研究

研究了以Sc2O3为原料，盐酸回流溶解后与NaCl，KCl，NH4Cl溶液混合，经蒸发浓缩、结晶、真空预脱水，再在氩气保护下分段升温脱水、升华除去过量NI-hCl后制备ScCl3-NaCl-KCl熔盐的新工艺。研究表明，添加NH4Cl后加热脱水时，NH4Cl分解产生的HCl气体能抑制ScCl3水合物加热过程中的水解，溶解产生的水不溶性钪，从而有效地防止了Sc2O3等水不溶化合物的生成。制备的ScCl3-NaCl-KCl熔盐脱水完全、水不溶性钪含量很低，能满足熔盐金属热还原法制备金属钪及铝钪中间合金对熔盐原料的要求。     

取代茚基稀土配合物/添加剂体系催化丙烯腈聚合

研究了取代茚基稀土配合物 /添加剂体系对丙烯腈的聚合 ,发现季胺盐及芳氧钠是取代茚基二价稀土配合物催化丙烯腈聚合的有效添加剂 ,其中Me3NC1 6 H33Br效果最好 ,5种二价稀土配合物 (C5H9C9H6 ) 2 Yb (THF) 2 ,(C5H9C9H6 ) 2 Sm (THF) 2 ,KSm (C5H9C9H6 ) 3(THF) 3,(PhCH2 C9H6 ) 2 Sm(THF) 2 和 (CH3CH2 C9H6 ) 2 Sm (THF) 2 与Me3NC1 6 H33Br构成的催化体系对于丙烯腈聚合都显示出好的催化活性。对(C5H9C9H6 ) 2 Yb(THF) 2 /Me3NC1 6 H33Br体系而言 ,在丙烯腈中当催化剂用量为 2× 10 - 5mol·g - 1时 ,丙烯腈聚合的最大转化率为 61%。     

稀土掺杂对锂离子电池正极材料LiMn2O4结构及电性能的影响

利用微波加热技术合成稀土掺杂基锂离子电池正极材料LiMn2-xRExO4(RE=Y，Nd，Gd，Ce)，通过XRD、循环伏安及恒电漉充放电测试研究了稀土掺杂离子对合成正极材料结构及电化学性能的影响。XRD测试结果表明，合适的掺杂量可以起到扩展锂离子脱嵌通道和稳定骨架结构的作用，稀土离子的引入可以部分取代原有的三价锰离子，由于稀土离子的离子半径较三价锰离子大，因此稀土掺杂锰酸锂材料的晶胞参数比未掺杂材料大，在一定程度上扩充了锂离子迁移的三维通道，更有利于锂离子的嵌入与脱嵌；循环伏安及恒电漉充放电测试结果表明稀土掺杂有效提高了LiMn2O4材料的电化学循环可逆性及循环稳定性。     

Coordination solids via assembly of adaptable components: systematic structural variation in alkaline earth organosulfonate networks

A family of alkaline earth organosulfonate coordination solids is reported. In contrast to more typical crystal engineering approaches, these solids are sustained by the assembly of building blocks that are coordinatively adaptable rather than rigid in their bonding preferences. The ligand, 4,5-dihydroxybenzene-1,3-disulfonate, L, progressively evolves from a 0D, 1D, 2D, to a 3D microporous network with the Group II cations Mg(2+), Ca(2+), Sr(2+), and Ba(2+), (compounds 1-4), respectively. This trend in dimensionality can be explained by considering factors such as hard-soft acid-base principles and cation radii, a rationalization which follows salient crystal engineering principles. The selective gas sorption properties of the microporous 3D network [Ba(L)(H(2)O)].H(2)O, 4, with different gaseous guests are also presented.     

八—4—(四氢糠氧基)双酞菁衍生物钕(Ⅲ)、铕(Ⅲ)的合成和LB膜的气敏性

八—４—（四氢糠氧基）双酞菁衍生物钕（Ⅲ）、铕（Ⅲ）的合成和ＬＢ膜的气敏性张引＊辛春梅王丹（吉林省教育学院化学系，长春１３００２２）梁冰洁＊＊陈文启席时权（中科院长春应用化学研究所，长春１３００２２）关键词：希土双酞菁衍生物ＬＢ膜气敏性荧光性紫外可见...