Thermochemistry of interactions of Na+ with benzo-15-crown-5 ether in acetonitrile-water mixtures at 298.15 K

Enthalpies of dissolution of benzo-15-crown-5 ether (B15C5) in mixtures of acetonitrile with water and in solutions of NaI and NaBPh₄ (I=0.05 mol dm^–3) in these mixtures were measured at 298.15 K. From the obtained results and appropriate literature data, the thermodynamic functions of B15C5/Na⁺ complex formation in acetonitrile-water mixtures were determined. The enthalpies of transfer of the complex B15C5/Na⁺ from pure acetonitrile to the examined mixtures were calculated and are discussed.     

Determination of Diffusion Coefficients for Binary Nonelectrolyte Mixtures. A Free-Volume Predictive Approach

A diaphragm cell has been used to measure mutual diffusion coefficients at 25°C for four binary nonelectrolyte mixtures: ethylbenzene + n-hexane, carbon tetrachloride + ethylbenzene, cyclohexane + p-xylene, and 1,2-dichloroethane + cyclohexane. A free-volume predictive approach for binary mutual diffusion coefficients was developed and tested. Only infinite dilution diffusion coefficients, some readily available pure substance data, and UNIFAC group contribution parameters are used in the model. No binary equilibrium thermodynamic information is required. For 73 binary systems with an overall average absolute deviation of 5.2%, it has been shown that the developed method is better than two commonly available reference methods for the prediction of liquid diffusion coefficients.     

Characterization of the solid phases of paracetamol and fenamates at equilibrium in saturated solutions

Differential scanning calorimetry (DSC), supported by hot stage microscopy, IR spectroscopy and X-ray powder diffractometry, was used to investigate the characteristics of the solid phases of mefenamic, niflumic, and flufenamic acids and of paracetamol, before and after equilibration with saturated solutions in different solvents. Mixtures of Lewis base (dioxane and ethyl acetate) and amphiprotic solvents (ethanol and water) were prepared for evaluating the influence of both nature and polarity of the solvents. Solid-state analysis performed on the original samples (commercial products) made it possible to establish that paracetamol, mefenamic acid and flufenamic acid were in their respective Form I. No polymorphic modifications are known for niflumic acid. Paracetamol, niflumic and mefenamic acids did not show any change after equilibration with the various solvents or solvent mixtures, regardless of their different chemical nature. In contrast, DSC, IR and X-ray analyses revealed the partial recrystallization of flufenamic acid into its polymorphic Form III in solid phases at equilibrium with ethanol, ethyl acetate and their blends, as well as in dioxane-water mixtures containing 30 to 100% dioxane and in ethanol-water mixtures with a water content less than 50%. This revised version was published online in July 2006 with corrections to the Cover Date.     

Pervaporation of ethanol-water mixtures through temperature-sensitive poly(vinyl alcohol-g-N-isopropyacrylamide) membranes

Novel temperature-sensitive membranes have been synthesized by grafting poly(N-isopropyacrylamide) (poly(NIPAAm)) onto a poly(vinyl alcohol) (PVA) backbone using hydrogen peroxide-ferrous ion as initiator. Due to the grafting of poly(NIPAAm), the hydrophilic/hydrophobic balance and the polarity of the pendent groups within the membranes are modified. Significant temperature sensitivity of the grafted membranes is observed close to the LCST of linear poly(NIPAAm) in the pervaporation processes for ethanol-water separation. Both the pervaporation and sorption selectivities for water show a maximum value in the vicinity of 30–32°C for an ethanol content of 75 and 80%. The temperature sensitivity of the grafted membranes also depends on the ethanol concentration. The maxima of pervaporation and sorption selectivities disappear when the ethanol content is lower than 75% because the much larger degree of swelling reduces the size screening effect of the membranes.     

Thermodynamic properties of aqueous organic mixtures near the critical demixing: Cases of 2,6-dimethylpyridine and of 2-isobutoxyethanol

Phase diagrams, volumes and heat capacities of aqueous mixtures of 2,6-dimethylpyridine (2,6-L) and 2-isobutoxyethanol (iBE) and activities of 2,6-L in aqueous mixtures were measured in the monophasic region near the lower critical solution temperature (LCST). With 2,6-L some measurement were also made just above the LCST. From the temperature dependence of these data, partial molar relative enthalpies (2,6-L), expansibilities and the temperature derivative of heat capacities were calculated and show that iBE undergoes a microphase transition at low concentration which is not related to the phase separation. On the other hand, the properties of 2,6-L in the water-rich region at temperatures well below the LCST indicates that this solute has only a slight tendency to associate. The heat capacities of 2,6-L show an important increase near the LCST. Such changes are not observed for iBE and other alkoxyethanols and amines since these systems already exist in the form of microphases; the partial molar properties of iBE near the LCST are nearly equal to the molar values of the pure liquid, and the changes in thermodynamic properties corresponding to the macroscopic phase transition, are therefore too small to be measured by the present techniques.     

Highly tilted antiferroelectric (R) enantiomers useful for the formulation of eutectic mixtures

ABSTRACT

Novel chiral three-ring (R) enantiomers were synthesised using optically active (R)-(?)-2-octanol. Properties, such as the sequence of phases, the transition temperatures and enthalpies, were tested by a polarising optical microscope and differential scanning calorimeter. An antiferroelectric smectic phase (SmC_A*) with a direct transition from the antiferroelectric to the isotropic phase (SmC_A*-Iso) was observed for three esters with an achiral C₃F₇CH₂O(CH₂)₃O– terminal chain. Bi- and multicomponent mixtures with a broad temperature range of the antiferroelectric phase and good electro-optical properties were formulated. Helical pitch of pure esters and mixtures was measured by spectrophotometry method.     

Conductance of potassium lodide in mixed solvents

The conductance of potassium iodide has been measured in the solvents ethylene carbonate, water, methyl ethyl ketone, and pairwise mixtures of these solvents at 40°C; and ethylene carbonate-water, tetramethylene sulfone-water, dimethyl sulfoxide-water, tetrahydrofuran-water, ethylene carbonate-tetramethylene sulfone-water, ethylene carbonate-tetramethylene sulfone, and tetrahydrofuran-dimethyl sulfoxide at 25°C. For dielectric constants greater than about 60, the pairing constants K_A are in the range 0.3–2.0; no correlation between K_A and solvent properties could be established. For lower dielectric constants, K_A increases exponentially with decreasing dielectric constant. Addition of a proton, acceptor to water initially decreases K_A regardless of whether the dielectric constant of the mixture is higher or lower than that of water, suggesting that ion pairs in water may be stabilized by cage structures. The Walden product A_o is also decreased by the addition of proton acceptors.     

New integrated measurement protocol using capillary electrophoresis instrumentation for the determination of viscosity, conductivity and absorbance of ionic liquid-molecular solvent mixtures

The low vapor pressure and the versatility of the physico-chemical properties of ionic liquids make them really attractive as an alternative for conventional molecular solvents. The knowledge of their physico-chemical properties (viscosity, conductivity, miscibility with organic solvents and anion-cation interactions) has appeared mandatory for better targeting their applications, although it is generally still lacking or incomplete.This work promotes capillary electrophoresis instrumentation as an integrated apparatus for measurement of viscosity, conductivity and absorbance of pure ionic liquids and ionic liquid-molecular solvent mixtures. Compared to current conventional techniques, the assets of this instrumentation for this purpose are the combined availability of a pressure delivery system, power supply, diode array absorbance detector and thermoregulation device, allowing unattended, automatic and easy operation, involving minimum sample handling. Most importantly, the required sample volume can be reduced to about 50 μL, making this protocol very cost-effective. A protocol was optimized with respect to time, sample consumption and data reliability for the determination of these physico-chemical parameters. Ionic liquids selected for method development and validation differed in the nature of their cation (butyl- and ethyl-methylimidazolium) and anion (trifluoromethanesulfonate and bis(trifluoromethanesulfonyl)imide). Various molecular solvents were mixed with these ionic liquids (acetonitrile, methanol, dimethylformamide and trifluoroethanol) and the same physico-chemical properties were determined by optimized methods. The knowledge of these data should be of great support in various application areas, including the development of new separation media for capillary electrophoresis and chromatographic techniques.     

Applicability of glass fiber as a support material for generation of gaseous standard mixtures using thermal decomposition of the surface compound. Calibration of analytical equipment

The use of glass fiber as a support material for a surface compound serving to generate gaseous standard mixtures of ethene is described. The technique is based on the process of thermal decomposition of the surface compound in a desorber connected on‐line via a multi‐port valve to the calibrated device. The surface compound undergoes thermal decomposition at 245°C, yielding known amounts of ethene. The method enables on‐line preparation of a standard mixture immediately before the calibration step. Consequently, it can be also applied for the generation of standard mixtures containing volatile, malodorous, unstable, and toxic compounds.