Microwave Irradiation for Accelerating Synthesis of New Chiral Nanostructured Poly(amide-imide)s Having a Thiazole Pendant Group

Microwave irradiation was used to accelerate the polycondensation of a new thiazole-containing diamine with several chiral diacids. Polymerization reactions were carried out in molten tetrabutylammonium bromide as a green molten salt medium and triphenyl phosphite as the homogenizer. A series of new compounds were characterized by Fourier transform-infrared spectroscopy, nuclear magnetic resonance spectroscopy, and elemental analysis techniques. The polymeric samples showed high thermal stability with decomposition temperature being above 360°C; they were in a nanoscale size and were assembled uniformly and randomly in a sponge-like morphology.     

Multiple Mechanism of NCA Polymerization: Effect of N-Acetylglycine NCA and Related Additives

Polymerization of α-aminoisobutyric acid NCA by alkaline salts of various basicity as well as amines has been investigated. The study was focused on the effect on the initial polymerization rate of additives such as N-acetylglycine NCA and some other less electrophilic additives (l-acetyl-2-pyrrolidone, 3-acetyl-2-oxazolidone, 1-acetyl-3-methylhydantoin) which are all models of the growing chain end produced by the NCA anion pathway. The acetyl endgroup was detected by 250 MHz ¹H-NMR in all the polymers of α-aminoisobutyric acid NCA obtained in the presence of l-acetyl-3-methylhydantoin and triethyl amine or sodium methoxide initiators, whereas the additives influenced variously the kinetics of polymerization according to the nature of the initiator used. The results were interpreted in the light of a multiple mechanism supposing the simultaneous presence of the initiator anion, its conjugate acid, and NCA anion for basic salt initiation. Thus, the observed effect has to be considered as the sum of an elementary acceleration due to NCA anion and of an elementary deceleration due to the initiator anion. Predominance of the pathways involving NCA anion could be shown this way. This conclusion could be extended to γ-benxyl-L-glutamate NCA which is a more reactive NCA. However, the deceleration observed with some additives led us to believe that a nonnegligible participation of initiator anion during initiation cannot be excluded.     

Copolymeric nano/microgels of N-isopropylacrylamide and carboxyalkyl methacrylamides: Effect of methylene chains and the ionization state of the weak acids on size and sensitivity to pH and temperature

ABSTRACT

We prepared nano/microgels by precipitation copolymerization of N-isopropylacrylamide (NIPAAm), and one of three different carboxyalkyl methacrylamides [methacryloylamido hexanoic acid (M₅), 8-methacryloylamido octanoic acid (M₇), and 11-methacryloylamido undecanoic acid (M₁₀)], either in the acid forms or as carboxylates (potassium salts). The hydrodynamic diameter (Dh) of the nano/microgels prepared with the carboxylates was smaller (≈100 nm for M₁₀ copolymers), compared to the size of homopolymeric NIPAAm microgels prepared by dispersion polymerization (around 600 nm), indicating that the carboxylates act as surfactants reducing the size of the seeds during the polymerization process. These materials presented a swollen-shrunken transition temperature (T _tr) similar to the T _tr of the homopolymeric NIPAAm microgels, without pH sensitivity. On the other hand, the copolymeric microgels prepared from the acid form of the comonomers have a similar or bigger size than NIPAAm microgels. For these copolymers, the T _tr can be tuned by the type and proportion of acid comonomer used and present pH sensitivity. This is important for biomedical applications such as positive temperature control release. Polyelectrolyte titration demonstrates that the nano/microgels prepared with the carboxylates behave as hard spheres, while the microgels prepared with the weak acid behave as porous materials.     

Synthesis and investigation of photovoltaic properties for polymer semiconductors based on porphyrin compounds as light-harvesting units

We reported on two polymer semiconducting copolymers based on porphyrin compounds, poly[9,9-dioctylfluorene-co-5,15-bis(hexoxybenzyl)-10,20-bis(benzo-4-yl)porphyrin] (PFPor) and poly[9-(heptadecan-9-yl)carbazole-co-5,15-bis(hexoxybenzyl)-10,20-bis(benzo-4-yl)porphyrin] (PCPor), for use as organic photovoltaic materials. The thermal, optical, electrochemical, and photovoltaic properties of the two polymers were investigated. In addition, PC₆₁BM and PC₇₁BM were introduced as acceptor materials to confirm the acceptor effect in bulk heterojunction photovoltaic devices. Moreover, in order to establish acceptor effects, morphologies of polymer/PCBM blend films were analyzed through atomic force microscopy (AFM). PFPor and PCPor exhibited the best device performance with power conversion efficiencies (PCE) of 0.62% and 0.76%, respectively, upon the introduction of PC₇₁BM as the acceptor in the device where 86 wt.% of the PC₇₁BM was contained in the active layer (pol:PC₇₁BM = 1:6, w/w).     

Ionic electroactive polymer metal composites: Fabricating,modeling, and applications of postsilicon smart devices

Smart systems adapt to the surrounding environments in a number of ways. They are capable to scavenge energy from available sources, sense and elaborate external stimuli and adequately react. Electro Active Polymers are playing a main role in the realization of smart systems for applications if fields such as bio inspired and autonomous robotics, medicine, and aerospace. This paper focus on the possibility to use Ionic Polymer Metal Composites as a class of materials relevant to the realization of post silicon smart systems. The three main aspects of this new technology, i.e., fabrication methods, modeling, and applications are described with emphasis to most recent results. Attention is given to main challenges and shortcomings to be solved for technology, modelling, and control of IPMC based devices that need to be solved before this new technology can be fully exploited in real world applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013     

含磺酸根侧链的聚苯乙炔-吡啶类共轭聚合物的荧光传感性能

利用Sonogashira偶合反应合成了两种新的含磺酸根侧链的聚苯乙炔-吡啶类共轭聚合物P1, P2. 通过紫外-可见吸收光谱和荧光光谱对其光学性质及Cu^2＋传感检测进行了研究. 结果表明, 按一定比例嵌段引入吡啶环的聚合物P1能有效地改善共轭主链的刚性, 提高检测的灵敏度, 使共轭聚合物具有更优异的荧光化学传感性能. 在甲醇溶剂中, P1 的荧光能被Cu^2＋有效地猝灭, 相对单体模型分子PESO₃, 其响应信号扩大222倍.     

Fluorinated styrene-based monomers for cyclopolymerizations

The synthesis of versatile fluorine compounds and monomers for conducting polymer research and cyclopolymerizations is presented. Semiprotected 2,3,5,6-tetrafluoroterephthaldehyde 1 could be elaborated through Wittig olefination chemistry, deprotection and reduction to the previously unknown 4-vinyl-2,3,5,6-tetrafluorobenzylalcohol 8 in good yields. Compound 8 can be reacted to form the malonate ester, and then alkylation on the malonate moiety in mild conditions affords difunctional monomer 3. Through sequential esterifications on the malonate moiety, and subsequent alkylation, compound 4, a difunctional monomer for cyclopolymerization bearing one styrene and one perfluoroaryl styrene moiety, has been obtained. Preliminary experiments show that it is possible to cyclopolymerize 4 under free radical conditions.     

新型含氟聚芳醚酮的合成与表征

聚芳醚酮具有很高的热稳定性和优良的电性能及机械性能 ,已经被广泛应用于宇航、电子及核能等高技术领域 [1] .氟元素的引入可以降低材料介电常数、折光指数和吸水率 ,提高热稳定性、溶解性和阻燃性 ,增加材料透明度 ,使这类聚合物在光电子、光学和微电子等应用领域的研究倍受关注 [2～ 4 ] .本文在合成含三氟甲基苯侧基的聚芳醚酮 [5] 的基础上 ,设计并合成了新型的含氟量更高的单体和聚合物 ,并对其性能进行了初步研究 .1　实验部分1 .1　试剂与仪器　 [3,5 -二 (三氟甲基 ) ]苯代对苯醌 (自制 ) ;锌粉 ,A.R.级 ,天津化学试剂一厂产品 ;…     

调制式DSC在高聚物研究中的应用

综述了一种新的热分析技术－－调制式差示扫描量热示（Modulated Differentail Scanning Calorimetry）。对其工作原理，优点及在高聚物研究中的应用作了简介。