Correlation of the position of the bond functions in H-X with electronegativity

S type Gaussian bond functions are optimized for HF, H₂O, NH₃, and CH₄. The optimization is carried out with respect to the exponent and position in the H-X bond. The position is found to correlate well with the electronegativity of Pauling and Allred-Rochow.     

The intermolecular potential function of Smith–Thakkar type for C60

The intermolecular potential function of Smith–Thakkar type for C₆₀ has been proposed, and its expression is as follows

The unit of u(r) is J/mol, r is the distance between two C₆₀ molecules center and the unit is nm. Some properties of C₆₀ in the gas and crystal have been studied using the interaction potential of Smith–Thakkar type, such as stability of C₆₀ crystals, virial coefficient and lattice dynamics.     

Subtractive differential pulse voltammetry following adsorptive accumulation of organic compounds

Subtractive differential pulse voltammetry following adsorptive preconcentration of organic compounds at solid electrodes is described. Different preconcentration periods are used, and the difference between the oxidation (stripping) currents is recorded. Background currents which are independent of the preconcentration period cancel out. Combining the enhanced peak current, due to the preconcentration step, with the background current correction of the subtractive mode, gives improved sensitivity and/or allows the use of shorter preconcentration periods. Chlorpromazine and dopamine have been used as test systems. A detection limit of around 1 x 10(-9)M has been obtained for chlorpromazine with a 10-min preconcentration period. Applicability to clinical samples is illustrated by the determination of chlorpromazine in whole blood and urine.     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

双马来酰亚胺增韧研究Ⅱ.链扩展双马来酰亚胺及其树脂的合成及表征

合成了一系列结构不同和链长短不一的双马来酰亚胺，并对其结构和性能作了表征，同时研究了它们的固化反应和固化产物的性能。用双马来酰亚胺和二烯丙基化合物反应制造了增韧树脂，研究了该树脂的固化和热稳定性。     

Kinetic determination of microamounts of some sulphur-containing ligands

Some sulphur-containing ligands have been shown to inhibit the Hg(II)-catalysed substitution of p-nitrosodiphenylamine (p-NDA) for cyanide in hexacyanoferrate(II), by binding the mercury(II). This effect is used for determination of microamounts of cysteine, thioglycollic acid and thiosulphate. The reactions are followed spectrophotometrically at 640 nm (lambda(max) of [Fe(CN)(5).p-NDA](3-)). The determination range depends on the amount of mercury(II) added and the stability of the Hg(II)-ligand complex. Under specified conditions, the detection limits are: thioglycollic acid 1 x 10(-7)M, cysteine 1 x 10(-6)M and thiosulphate 4 x 10(-7)M.     

载体γ-Al2O3和钐对非晶态NiB合金热稳定性的影响

用化学还原法制备了NiB、NiB/Al2O3和NiBSm/Al2O3三种催化剂，它们都呈非晶结构.用等离子耦合发射光谱仪(ICP)对催化剂组分进行了分析，采用差示扫描量热法（DSC）对三种催化剂进行了热稳定性分析.结果表明，载体的引入使非晶态NiB合金的体相组成中B的含量降低.将非晶态NiB合金负载到γ-Al2O3上,可以明显改善非晶态合金的热稳定性，少量Sm可以进一步提高晶化温度.晶化激活能数据亦表明了载体和Sm对非晶结构具有良好的稳定作用.载体和Sm可能通过不同的作用提高了非晶态合金的热稳定性.     

The use of glass capillary columns for the analysis of polar natural products

Two published procedures for glass capillary column production are applied to produce capillaries for chromatography of polar natural compounds. Soda lime glass capillaries, after leaching with aqueous HCL, are either treated with colloidal silicic acid or with barium carbonate and coated with either Silar 7CP or SE 52. A test mixture as well as polar carbohydrate and peptide mixtures are chromatographed on the different columns and their chromatographic properties are evaluated. Combined capillary gas chromatography-electron impact and chemical ionization mass spectrometry are used for identification of the peptide sequence.     

A simplified integral equation for adsorption of gas mixtures on heterogeneous surfaces

Summary The multiple integral representing the overall isotherm for adsorption of gas mixtures on heterogeneous surfaces is transformed to a single integral, which is promising for predicting the mixed-gas adsorption by means of single-gas adsorption parameters. This transformation is possible when the adsorption energies of components for various adsorption sites show a certain type of correlation.

---

Eine vereinfachte Integralgleichung für die Adsorption von Gasmischungen auf heterogenen Oberflächen

Zusammenfassung Das multiple Integral, das die Adsorption von Gasmischungen auf heterogenen Oberflächen darstellt, wurde zu einem einfachen Integral transformiert, das zur Voraussage der Adsorption von Gasgemischen mittels der Einzelgas-Adsorptionsparameter geeignet sein sollte. Diese Transformation ist dann möglich, wenn die Adsorptionsenergien der Komponenten einem bestimmten Korrelationstyp angehören.

     

The composition of the evolved gases from the thermal decomposition of certain metal sulfates

By the use of TG—MS, the thermal dissociation of anhydrous CuSO₄ and Al₂(S0₄)₃ was found to proceed according to the reactions:

followed by the reactions:

No SO₃ was indicated in the dissociation of alunite. The sulfate ion appears to dissociate by at least two different mechanisms although the parameter which controls the mechanisms has not been elucidated.