Electrostatics of phosphatidic acid monolayers: Insights from computer simulations

In this paper, we argue that many of the fascinating electrostatic effects that take place in amphiphilic systems are strongly related to the particular organization of the oxygen atoms within each individual molecule. In particular, we focus on two effects: charge inversion and dielectric overscreening. For that purpose, we present molecular dynamics simulations of phosphatidic acid (DMPA²⁻) in the presence of divalent counterions. Our results show that the many oxygens present in DMPA²⁻ cooperatively create strong binding sites for counterions, which in some cases lead to charge inversion. We also present an analysis of the role of interfacial water and relate our analysis to the phenomenon of dielectric overscreening. Several experimental implications are discussed in the conclusions.     

一种含氟丙烯酸树脂的制备及其表面疏水性

在聚合反应的后期阶段,向体系中引入含氟丙烯酸酯单体全氟辛基-(N-乙基-N-丙烯酸乙酯基)磺酰胺(QG-F814)共聚改性的方法制备了一种含氟丙烯酸树脂.接触角测定表明,该树脂具有良好的疏水性能.热重分析表明,该树脂在改性前后的耐热稳定性差别不大.     

Comments on surface structure analysis by water and nitrogen adsorption

Specific surface area and pore size distribution are determined usually from adsorption isotherms at low temperatures using nitrogen or noble gases. These are not absolute parameters and the measuring methods are fraught with serious difficulties. General problems of sorption measurements and recent developments are discussed. To obtain information for practical purposes these measurements need to be supplemented by investigations of the sorbate/sorbent system used in practice. Results of the measurement of nitrogen and water vapour adsorption on different materials are compared. This revised version was published online in July 2006 with corrections to the Cover Date.     

Solvation Phenomena of Potassium Thiocyanate in Methanol–Water Mixtures

This paper reports the results of a variety of experiments carried out for understanding the solvation behavior of potassium thiocyanate in methanol–water mixtures. Electrical conductivity, speed of sound, viscosity, and FT-Raman spectra of potassium thiocyanate solutions in 5 and 10% methanol–water (w/w) mixtures were measured as functions of concentration and temperature. The conductivity and structural relaxation time suggest the ion–solvent and solvent-separated ion–ion associations increase as the salt concentration increases in the mixtures. The Raman band shifts due to the C–O stretching mode of methanol for the solvent mixtures reveal the formation of methanol–water complexes. The significant changes in the Raman bands for the C–N, C–S and O–H stretching modes indicate the presence of SCN⁻−solvent interactions through the N-end, “free” SCN⁻ and the solvent-shared ion pairs as potassium thiocyanate is added to the methanol–water mixtures. The relative changes corresponding to H–O–H bending and C–O stretching frequencies indicate that K⁺ is preferentially solvated by water in these solvent mixtures. The appearance and increase of the intensity of a broad band at ≈940 cm⁻¹ upon salt addition was attributed to the SCN⁻–H₂O–K⁺ solvent-shared ion pairs. No Raman spectral evidence for K⁺(H₂O)_n species was observed. The preferential solvation of K⁺ and SCN⁻ in the methanol−water mixtures was verified by the application of the Kirkwood−Buff theory of solutions. This theory confirms that K⁺ is strongly preferentially solvated by water, whereas SCN⁻ is preferentially solvated by the methanol component.     

Photocatalytic Oxidation of Aniline in the Gas Phase Using Porous TiO2 Thin Films

The gas-phase photocatalytic oxidation of aniline on a new kind of porous nano-TiO₂ composite films is investigated. The composite film was prepared on glass fiber with the water glass as binders and dilute H₂SO₄ solution as solidifying reagent. The surface characters were observed by scanning electron microscope. The photocatalytic degradation of aniline on the composite films was carried out in a TiO₂/UV system. Some important factors affecting the photodegradation, such as the concentration of TiO₂, the initial concentration of aniline, and the existing water vapor, are also studied. The product of photocatalytic oxidation was detected by Fourier transform-Infrared. The partial intermediate products were absorbed on TiO₂ surface, which resulted in catalyst deactivation. But when it was irradiated under UV illumination or solar irradiation for some time, the catalyst could be reused without loss of catalytic activity. Translated from the Journal of Wuhan University (Natural Science Edition), 2005, 51(2) (in Chinese)     

Ab initio calculations of vibronic activity in phosphorescence microwave double resonance spectra of p-dichlorobenzene

The phosphorescence spectrum of p-dichlorobenzene has been calculated using multiconfiguration self-consistent-field wave functions and the quadratic response technique. Attention has been paid to the intensity distribution of the singlet–triplet (³B_1u¹A_g) transition through a number of vibronic subbands. The second order spin–orbit coupling (SOC) contribution to the spin splitting of the ³B_1u (^3*) state is found to be almost negligible, and the calculations therefore provide a good estimate for the zero-field splitting (ZFS) parameters based only on the electron spin–spin coupling expectation values. Nuclear quadrupole resonance constants for the different Cl isotopes are also calculated to accomplish the ZFS assignment. The electric dipole activity of the spin sublevels in the triplet–singlet transitions to the ground-state vibrational levels is estimated by calculations of derivatives using distorted geometries which are shifted from the equilibrium position along different vibrational modes. A vibrational analysis of the phosphorescence spectrum, based on the SOC-induced mixing of the singlet and triplet states calculated along different vibrational modes, provides reasonable agreement with experimental data.Acknowledgment O. R.-P. would like to thank the European MOLPROP network for support. The authors thank Alexander Baev for fruitful discussions. This work was supported by the Swedish Royal Academy of Science (KVA).     

On the stereochemistry of the Horner—Emmons reaction between 3-functionally substituted 2-methyl-2-propenylphosphonates and aliphatic aldehydes

The reaction of diethyl 3-ethoxycarbonyl-2-methyl-2-propenylphosphonate (1a) with 3-methylbutanal (2) in heterogeneous MOH (solid)-benzene systems in the presence of 5–10 mol.% of benzyltriethylammonium chloride (BTEAC) gives the reaction product (3) with a higher, for M=K, or lower, for M=Li, ratio of 2E,4E and 2Z,4E-stereoisomers than that observed in the absence of BTEAC. Tetrabutylammonium bromide (TBAB) as a catalyst of the reaction1a + 2 3 in the system KOH (solid)-wet benzene leads to a higher [2E,4E-3][2Z,4E-3] ratio than BTEAC; this ratio grows from 4456 without TBAB to 8020 at 100 mol.% of TBAB. In the latter case the stereochemical outcome of the reaction is similar to that obtained when tetrabutylammonium hydroxide in dry benzene is used as the deprotonating agent. The corresponding diisopropyl phosphonate (1b) and 3,7-dimethyloctanal (4a) interact in the system KOH (solid)-wet benzene-TBAB to give hydroprene (5) containing 88 % of the 2E,4E-isomer (5a) while in the case of 1 equiv. of [(n-Bu₄)N]OH in dry benzene the content of5a is 92 %. Diisopropyl 3-isopropoxycarbonyl-2-methyl-2-propenylphosphonate (1c) and 7-methoxy-3,7-dimethyloctanal (4b) under either of these conditions afford methoprene (6) containing 93 % of the 2E,4E-isomer.Part 6, see ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1094–1098, June, 1993.     

Phosphorescence lifetime of naphthalene and phenanthrene in aggregated aromatic molecule-β-cyclodextrin-precipitant complexes

Aggregated aromatic molecule--cyclodextrin-precipitant complexes exhibit long-lived phosphorescence at room temperature in water after the chemical binding of oxygen. The temperature dependences of the phosphorescence lifetimes of naphthalene-h₈, naphthalene-de, and phenanthrene in the aggregates were measured. For example, the phosphorescence lifetimes of naphthalene-d₈ aggregated with -cyclodextrin and cyclohexane are equal to 25.1, 17.6, and 6.8 s at 77, 276, and 347 K, respectively, and that of phenanthrene aggregated with isooctane and -cyclodextrin are 3.24, 3.06, and 1.26 s at 268, 274, and 335 K, respectively. The temperature dependences of the phosphorescence lifetimes at room temperature are determined by the rate constants of the radiative and nonradiative transitions from the triplet state of an aromatic molecule.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2225–2228, September, 1996.     

Ethanol/water pulp enzymatic pretreatment: Chemical and FTIR-PCA analyses

Pulps obtained from ethanol/water cooking of sugarcane bagasse were treated at different times using xylanase enzyme obtained from Thermomyces lanuginosus IOC-4145 or commercially (Cartazyme HS, Sandoz Products Ltd.). The enzyme dosage was 18 IU per g of dry pulp and the time varied from 4 h to 12 h. When xylanase from T. lanuginosus was used, the kappa number and viscosity improved independently of the processing time used (4 h, 8 h, and 12 h). After chemical evaluation, the obtained pulps were classified using Fourier Transformed Infra-Red Spectroscopy and Principal Component Analysis. The results showed that the first three principal components explained more than 90 % of the total variance of the pulp spectra.