High-pressure NMR study of water exchange on magnetic resonance imaging contrast agents

Abstract

The knowledge of water exchange reaction mechanism in aqueous solutions of Gd³⁺ polyaminocarboxylates is important for the understanding of the relatively slow water exchange rates measured for these complexes. Variable ressure measurements show a change of mechanism from associatively activated on [Gd(H₂O)₈]³⁺ and [Gd(PDTA)(H₂O₂)₂]^? to probably limiting dissociative on the MRI contrast agents [Gd(DOTA)(H₂O)]^?, [Gd(DTPA)(H₂O)]^2? and [Gd(DTPA-BMA)(H₂O)].     

A review on recent advances in hierarchically porous metal and metal oxide nanostructures as electrode materials for supercapacitors and non-enzymatic glucose sensors

The remarkable significance of electrode materials in industrial processes, energy, sustainability and diabetes monitoring has captivated scientists to develop advance nanomaterials for the benefit of life across the globe. Here in, the recent developments in nanostructured porous metal and metal oxide composite materials for supercapacitor applications and non-enzymatic glucose sensors (NEGS) has been extensively discussed. The essential and active electrode materials from the research and application perspective has been emphasized in detail. We have also evaluated the worthiness, taxonomical classification, efficiency, specific capacitance and sensitivity of these materials for the aforementioned potential applications. Eventually, we concluded the review by providing the aspect ratio, surface morphology, particle size and specific surface area of these materials that plays an indispensable role for their promising potential applications.     

预嵌锂硬碳和软碳用于锂离子电容器负极的比较研究

锂离子电容器是一种应用前景广阔的电化学储能器件. 目前,活性炭作为锂离子电容器正极被广泛使用. 然而,锂离子电容器负极却有多种不同选择,如硬碳和软碳等碳材料. 本文使用两种具有不同结构和电化学特性的硬碳和软碳材料作为锂离子电容器负极,进行了对比研究. 研究表明,软碳相比于硬碳有更好的电子导电性和更高的可逆容量. 通过在电流范围0.1 ~ 12 A·g^-1下进行充放电测试,分别研究了两种碳基电极在不同涂覆厚度下的倍率性能. 结果显示,硬碳电极在大电流下有更好的倍率特性. 然后,以活性炭为正极,预嵌锂的硬碳和软碳为负极,锂片为锂源和参比电极,分别组装了三电极软包锂离子电容器. 根据三电极充放电测试,分别研究了不同预嵌锂量的硬碳和软碳所组装的锂离子电容器的电化学性能. 结果表明,合适的负极预嵌锂容量可以提升锂电容的能量密度、功率密度和循环稳定性. 最后,大容量硬碳和软碳基软包锂离子电容器被分别组装,软碳基锂电容实现了最高的能量密度21.2 Wh·kg^-1（基于整个器件质量）,硬碳基锂电容实现最高的功率密度5.1 kW·kg^-1.     

Evaluation,Pitfalls and Recommendations for the “Water Layer Test” for Solid Contact Ion‐selective Electrodes

The “water layer test” is a crucial validation step of solid‐contact ion‐selective electrodes. It can confirm or contest the claim that the tested electrode is indeed a genuine solid contact electrode without an aqueous film between the ion‐selective membrane and its solid contact. Information about the presence of a water layer is essential for the interpretation of drifts in the electrode potentials commonly experienced with solid contact electrodes. Since its publication, the water layer test has been ubiquitously used, but without a standardized protocol the interpretation (or misinterpretation) of the test results led to uncertainties in the conclusions. Through both experiments and simulations based on theoretical models we have investigated the experimental parameters that can influence the results of the water layer test. We propose guidelines to minimize the possibility of misinterpretation of the results of the water layer test by considering the key factors that affect the shape of transients recorded during the water layer test. Most importantly, we emphasize the importance of allowing sufficient time for conditioning the tested electrode before the water layer test and providing adequate time for equilibration during the experiment. Using a thin ion‐selective membrane and thin solid‐contact layer for the tests is also recommended.     

Hollow fiber liquid phase microextraction as a preconcentration and clean-up step after pressurized hot water extraction for the determination of non-steroidal anti-inflammatory drugs in sewage sludge

A method for the quantitative determination of non-steroidal anti-inflammatory drugs (NSAIDs) in sewage sludge was developed and validated. The target compounds were extracted using pressurized hot water extraction (PHWE) and then purified and preconcentrated by three-phase hollow fiber liquid phase microextraction (HF-LPME) followed by LC–ESI-MS analysis. The PHWE was optimized with regard to the pH of solvent as well as other operational parameters. The optimum conditions were 0.01 M NaOH as the extraction solvent, temperature of 120 °C, pressure of 100 bar, static time 5 min, 5 cycles, flush volume 90% and purge time 60 s. Spike recoveries for sludge samples spiked at 200 ng g⁻¹ were in the range of 101–109% but for the native drugs in non-spiked sludge samples, recoveries were 38.9%, 59.8%, 90.3% and 47.8% for ketoprofen, naproxen, diclofenac and ibuprofen, respectively. Donor phase pH, ionic strength and extraction time were optimized for HF-LPME after PHWE. The optimum conditions were 2 h extraction at pH 1.5 without salt addition. Enrichment factors in the range of 947–1213 times were achieved (extraction recoveries were 23.6–30.3%) for HF-LPME after PHWE. The matrix effect on the ionization of drugs in LC–ESI-MS was also investigated. The results show that there is a smaller matrix effect (−8.9% to +14.6%) in comparison with other published values obtained using solid phase extraction (SPE) for clean-up after pressurized liquid extraction (PLE). Method detection limits (MDLs) and method quantification limits (MQLs) for different drugs were in the range of 0.4–3.7 ng g⁻¹ and 1.5–12.2 ng g⁻¹ in dried sludge samples, respectively. The characteristics of the proposed method were compared with those of other published works. The considerably lower ion suppression/enhancement and minimum use of organic solvents (a few microliters of di-n-hexyl ether) in the sample preparation step are two highlighted advantages of the proposed method in comparison with previously published works. The method was applied to determine NSAIDs in sewage sludge from Källby wastewater treatment plant (Lund, Sweden) in April, June, August and October 2010. The highest concentration level was recorded for ibuprofen in the April sewage sludge sample (588 ng g⁻¹) and all of the selected NSAIDs were detected in all the samples analyzed.     

Chitosan‐Hydroxybenzotriazole Aqueous Solution: A Novel Water‐Based System for Chitosan Functionalization

Summary: A chitosan‐hydroxybenzotriazole (HOBt) aqueous solution prepared by simply mixing chitosan and HOBt in water provides an effective system to functionalize chitosan in an aqueous environment. This aqueous solution in combination with water‐soluble carbodiimide (WSC) allows the conjugation of functional groups onto chitosan under mild conditions without requiring any organic solvents or acid and heat. In this contribution, a series of model reactions that use a novel water‐based system of chitosan to functionalize the polymer with boc‐L ‐phenylalanine, poly(ethylene glycol) methyl ether, and dicarboxylated poly(ethylene glycol) is demonstrated.

Chitosan‐HOBt is effectively conjugated with R‐COOH via a water‐soluble carbodiimide (WSC) conjugating agent.     

示差半微分循环伏安法研究琥珀酰胆碱在水/硝基苯界面的传递行为

研究了油/水界面电解的示差半微分循环伏安行为。在0.01mol/L LiCl(w)-0.01mol/L TBATCIPB(nb)体系“电位窗”比TBATPB(nb)向正方向扩展约50mV,残余电流基本消除,使“电位窗”内的平台向左右拓宽约50mV。算得界面电容约为16μF/cm~2。考察了琥珀酰胆碱离子在w/nb界面的传递伏安特性,结果与一般半微分循环伏安法相似。但峰形改善,检测限降低一个数量级(1×10~(-6)mol/L),相对标准偏差在5％以内,可用于定量测定琥珀酰胆碱。     

A metal-free approach to access ketones,amides, and nitriles employing TBAI/TBHP oxidative system in water

Hydrocarbons, benzylamines, and heteroaromatic-bearing amines have been efficiently employed as substrates in allylic and benzylic oxidations via C(sp3)–H bond activation by TBAI/TBHP in water. This operationally simple method allows access to ketones, nitriles, and amides in moderate to high yields and a regio- and chemoselective late-stage functionalization.     

基于瑞利熵的多无源传感器数据关联算法

针对当前多无源传感器数据关联算法构造关联代价时,未考虑位置估计不确定性所引入的误差,提出一种基于位置估计不确定性的被动传感器数据关联算法。首先通过量测与伪量测概率密度函数之间的瑞利熵构建关联代价函数,以准确描述两个相似的概率密度函数之间差异,然后通过具体实验测试本文算法的有效性和优越性。实验结果表明,相对于当前经典的数据关联算法,本文算法提高了数据关联的正确率和速度,具有更高的实际应用价值。     

时间延迟积分型面阵CMOS图像传感器MTF速度失配模型研究

研究了时间延迟积分型面阵互补金属氧化物半导体(CMOS)图像传感器调制传递函数(MTF)速度失配特性,在分析累加级数、像素尺寸、镜头放大倍数、行周期及电机运动速度失配等影响因素的基础上,建立了MTF速度失配模型。基于现场可编程门阵列(FPGA)开发板,搭建面阵CMOS图像传感器实现线阵时间延时积分(TDI)的CMOS测试系统。实验结果表明,在光强为3lx,速度失配M(ΔV/V)<2,8级时间延迟积分与面阵成像相比,MTF值提高50%;当累加级数为8级,速度失配满足M(ΔV/V)=2的速度失配容限时,奈奎斯特频率处的MTF值下降10%,当速度失配达到M(ΔV/V)=10时,MTF值下降35%。