丙烯酸酯接枝炭黑无皂水性涂料的性能研究

旋转粘度计研究了丙烯酸酯接枝炭黑无皂水性涂料的流变性能，并考察了着色涂料的冻融及贮存稳定性。接枝炭黑争散于无皂水性涂料中形成的着色涂料具有良好的综合性能。     

A review on environmental applications of chitosan biopolymeric hydrogel based composites

Abstract

Chitosan (CS) is being used for fabrication of low cost, biocompatible materials that have applicability in fields such as agriculture, biotechnology and environment. In Environmental research, one of the applications of CS based hydrogel composites are in form of biosorbents for eviction of toxic dyes, heavy metals and nutrients from effluent streams. The adsorption potential could be attributed to the reactive functional groups existing on the surface of CS. CS based materials can also be employed for oil/water separation, as a fertilizer carrier, in Microbial fuel cells as Electrolyte membrane and as Electrochemical/Biosensors for detecting and analyzing few environmental pollutants such as pesticides. The earlier review papers on the subject matter have concentrated mainly on dye and heavy metal removal without giving details of its utility in the field of electrochemistry and agriculture. Though the biopolymer holds numerous applications, it has not been discussed extensively. Thus, an attempt has been made to elucidate the current and potential applications of CS hydrogels and composites based on the efficacy it has shown in areas of removal of organic and inorganic contaminants such as dyes, heavy metals and nutrients, in agriculture, oil and water separation, Microbial Fuel cells and Electrochemical/Biosensors.

• HIGHLIGHTS

• Chitosan based hydrogel composites could be extensively used in the field of Environment Technology.

• The composites act as effective biosorbents for dye, heavy metal and nutrient removal because of the functional groups present on Chitosan’s surface.

• These can also be effectively used for oil/water separation and also as a fertilizer/pesticide carrier for their slow release.

• Chitosan based electrolytes can become a promising ecofriendly substitute for synthetic polymers in fuel cells.

• These biopolymers have also been researched upon as electrochemical/biosensors in recent years for detecting environmental pollutants.

     

The influence of aliphatic diols on the temperature of maximum density of water

The influence of various aliphatic diols on the temperature of maximum density (TMD) of water has been investigated. 1,2-Propanediol, 1,3-propanediol, 1,3-butanediol, 1,4-butanediol, 1,5-pentanediol, 1,6-hexanediol, and 2,5-hexanediol were found to yield positive structural contributions to the solute-induced shift in the TMD, i.e., they are structure makers. Contrariwise, data from the literature indicate that 1,2-ethanediol is a structure breaker. Relationships between the structure making/breaking tendencies of the solutes and the relative positions of the two hydroxyl groups are discussed.     

离子色谱-电感耦合等离子体质谱联用法测定水中痕量BrO-3及Br-

建立了离子色谱-电感耦合等离子体质谱联用技术(IC-ICP-MS)用于饮用水中的痕量BrO-3及Br-的测量.使用DIONEX Carbopac PA-100(4 mm×250 mm i.d.)在流速1 mL/min及5 mmol/L NH4NO3(pH 5.7)淋洗液下进行BrO-3和Br-的分离.该方法以100 μL进样量对BrO-3的检出限为0.0027 μmol/L(0.22 μg/L);对Br-的检出限为0.0067 μmol/L (0.54 μg/L).对水样的分析结果表明,所测矿泉水中的BrO-3浓度大大超出了世界卫生组织最新<饮用水水质准则>中所规定的溴酸盐的指导值,而所测量的青岛崂山区生活用水则未检出BrO-3.     

Multiresidue analysis of quinolones in water by ultra‐high perfomance liquid chromatography with tandem mass spectrometry using a simple and effective sample treatment

A rapid and simple analytical method has been developed for the determination of 19 quinolones in environmental water samples using ultra high performance liquid chromatography with tandem mass spectrometry. Chromatographic and detection conditions have been optimized and the separation was achieved in less than 4 min. The separation was carried out using a new‐generation column filled with superficially porous particles, resulting in lower backpressure and better resolution than totally porous particle columns. The quinolones were detected by electrospray ionization in positive mode using multiple‐reaction monitoring mode for acquisition. A sample treatment based on liquid–liquid extraction and phase separation via salting‐out was employed to achieve a fast and simple extraction that enables the multiresidue analysis. The method has been validated for an environmental well water sample from a mountain area. Very low limits of detection (between 10 and 90 ng/L) with relative standard deviations lower than 16.5% and recoveries higher than 73% were achieved. Moreover, well waters from different origins (mountain and coast areas and irrigated land) have been evaluated and similar results were obtained.     

钨砷杂多阴离子[KAs4W40O140(M·H2O)2]n-中配位水的取代反应

本文报道了[KAs_4W_(40)O_(140)(M·H_2O_2]~(n-)杂多阴离子中配位水的取代反应.在水溶液中,许多配体,如[Fe(CN)_6]~(4-)、[Fe(CN)_6]~(3-),SO_3~(2-)等都能取代配位水形成具有特征颜色的配离子.在水溶液中不能发生的配体取代配位水的反应,在非极性有机溶剂中却容易发生,这与配位水分子在非极性有机溶剂中易脱去形成配位不饱和态有关.     

Bilayer rGO-Based Photothermal Evaporator for Efficient Solar-Driven Water Purification[]**

Interfacial evaporation has emerged as a promising approach to produce freshwater. However, an urgent concern is that, due to the illegal discharge of industrial wastewater, most water bodies are polluted by trace volatile organic compounds (VOCs), which are easily volatilized and enriched in the collected water during the interfacial evaporation process. Herein, a bilayer photothermal evaporator was reasonably designed for contaminated water purification. The bottom hydrophilic rGO-sodium alginate (SA) sheets purposefully disintegrate water transport channels, thus quickly removing VOCs through physical adsorption. The rGO-SA-TiO₂ upper layer sufficiently absorbs incident light and therefore persistently generates reactive oxidizing species to degrade upward VOCs. Notably, the oriented microchannels inside the evaporator allow sustained light reflections to improve the utilization of solar energy. The evaporation rate can reach 1.63 kg m⁻² h⁻¹ with a considerably high VOC removal efficiency of up to 96 %. Such an integrated bilayer evaporator provides an effective strategy to obtain clean water via solar distillation.     

TATB固体与表面吸附水的相互作用研究

TATB（1，3，5-三氨基-2，4，6-三硝基苯）是最著名的耐热钝感炸药；水在 TATB表面的吸附作用研究具有理论和实用双重意义。在B3LYP/6-31G~（**）水平上 ，在对TATB晶体（001）表面作周期性计算的基础上经基组叠加误差（BSSE）校正 ，求得TATB的表面能为-19.90 kJ·mol~(-1)，与实验值良好相符；首次求得水在 TATB（001）面的吸附能为-10.25kJ·mol~(-1)；重点讨论了吸附前后能带和电子 结构的变化。     

Study of interactions of concentrated marine dissolved organic matter with copper and zinc by pseudopolarography

The interaction of dissolved organic matter (DOM) with copper and zinc in a concentrated seawater sample was characterised by pseudopolarography. Measurements performed at increased concentrations of copper(II) ions showed successive saturation of active DOM sites which indicate possible partition of copper between (i) free or labile complexes, (ii) reduced and released within the potential window of the method, and (iii) electroinactive copper complexes. Pseudopolarograms measured at pH 4 indicate a release of copper which was bound to the active sites of DOM that formed non-labile complexes. Variation of the peak position and half-peak width along the scanned deposition potentials and with the increasing concentration of copper bear the information about the complex electrochemical processes at the electrode surface and in the bulk of the solution. Pseudopolarograms of zinc showed a strong dependence of the peak current and the peak position along the scanned deposition potentials on pH values, indicating preferentially complexation of zinc with carboxylic-like active sites of DOM in the measured sample. Pseudopolarography is a valuable method in the trace metal complexation and speciation studies, serving as a fingerprint of the analysed sample.     

碳水混合物相互作用势及混合法则的实验研究和理论探索

 利用二级轻气炮加载技术研究了碳水混合物的冲击压缩特性。研究发现：冲击压力p低于19.0 GPa时,石墨与水混合物冲击压缩特性明显不同于金刚石与水混合物的冲击压缩特性;p大于23 GPa后,它们的特性十分接近;当p为52.9 GPa时,石墨与水混合物表现出反常的冲击压缩特性,压力增加而体积出现膨胀,这与高压下碳与水发生化学反应产生气体相关。还对碳水混合物的相互作用势及混合法则的选取进行了讨论。