H2O2络合凝胶法制备纳米TiO2/SiO2复合催化剂及其光催化性能

采用H2O2络合凝胶法获得钛的络合物[TiO(H2O2)]2 水溶胶,并与SiO2水溶胶包覆复合,制备了纳米TiO2/SiO2复合半导体催化剂,其结构经XRD和BET表征。以含阳离子艳红染料模拟废水降解为模型反应,考察了复合催化剂的光催化性能。实验结果表明:经650℃焙烧后的复合催化剂中TiO2粒径为9.8 nm,光催化活性最好,SiO2的最佳掺杂量为25%。     

聚酯废弃物改性植物油沥青粘结剂的红外研究

采用蒸馏厂的下脚料——各种植物油沥青(棉油沥青、豆油沥青、混合油沥青)为主要原料,用聚酯废弃物为改性剂,经裂解、酯化等工艺制备成三种铸造用植物油沥青粘结剂(MB)。同时采用红外光谱和热重分析等手段对该三种粘结剂的基团结构,性能与固化机理进行探索,并与合脂粘结剂比较。 结果表明：改性粘结剂的主要成分与合脂粘结剂大致相同,且具有更高的干拉强度、更慢的发气速度等优异性能,达到甚至超过合脂粘结剂的性能,可用于Ⅰ级型芯砂的粘结,而且成本低廉。     

A Simple Route to Produce Highly Efficient Porous Carbons Recycled from Tea Waste for High-Performance Symmetric Supercapacitor Electrodes

High-performance porous carbons derived from tea waste were prepared by hydrothermal treatment, combined together with KOH activation. The heat-treatment-processed materials possess an abundant hierarchical structure, with a large specific surface of 2235 m² g⁻¹ and wetting-complemental hydrophilicity for electrolytes. In a two-electrode system, the porous carbon electrodes’ built-in supercapacitor exhibited a high specific capacitance of 256 F g⁻¹ at 0.05 A g⁻¹, an excellent capacitance retention of 95.4% after 10,000 cycles, and a low leakage current of 0.014 mA. In our work, the collective results present that the precursor crafted from the tea waste can be a promising strategy to prepare valuable electrodes for high-performance supercapacitors, which offers a practical strategy to recycle biowastes into manufactured materials in energy storage applications.     

Optimizing the antioxidant biocompound recovery from peach waste extraction assisted by ultrasounds or microwaves

The possibility to valorize peach juice waste, either frozen or air-dried, through microwave (MAE) and ultrasound assisted extraction (UAE) was evaluated. MAE power, UAE amplitude and time were optimized using a 2²-factorial design. For frozen waste, optimal MAE (540 W, 50 s) and UAE (23%, 120 s) processes gave extracts presenting analogous content (on 100 g dry matter) of polyphenols (309–317 mg GAE), flavonoids (94–120 mg QE), anthocyanins (8–9 mg CGE), and similar antioxidant activity (2.1–2.2 mg TE). Extracts from dried waste resulted higher in polyphenols (630–670 mg GAE) but lower in flavonoids (75–90 mg QE), anthocyanins and vitamin C (not detectable). Although developing an energy density 2-fold higher than that of UAE, MAE more efficaciously extracted vitamin C (108 mg/100 g dm) and required half extraction time (50 s). MAE would also be less impactful than UAE in terms of greenhouse gas emission and energy requirements on industrial scale. The industrial valorization of peach waste through the application of microwave or ultrasound assisted extraction requires quantitative data, able to encourage company interest and investment. This study not only identifies optimal MAE and UAE parameters to assist the extraction of peach waste bioactive compounds but also provides a preliminary estimation of the potential economic and environmental impact on an industrial scale of these technologies.     

Thermal Catalytic-Cracking Low-Density Polyethylene Waste by Metakaolin-Based Geopolymer NaA Microsphere

Metakaolin-based geopolymer microspheres (MGM) with hierarchical pore structures were prepared by suspension dispersion method in dimethicone at 80 °C. The hydrothermal modification of MGM was carried out at a lower temperature of 80 °C, and a NaA molecular sieve converted from metakaolin-based geopolymer (NMGM) with good crystal structure was prepared and applied in thermal catalytic cracking of low-density polyethylene (LDPE) reaction. The one-pot two-stage thermal catalytic cracking of LDPE was carried out in a 100 mL micro-autoclave under normal pressure. In this work, the optimal proportions and optimal reaction conditions of catalysts for NMGM thermal catalytic cracking of LDPE waste to fuel oil were investigated. The NMGM catalyst showed high selectivity to the liquid product of thermal catalytic cracking of waste LDPE. Under the reaction conditions of reaction time of 1 h and reaction temperature of 400 °C, the liquid-phase yield of thermal catalytic cracking of LDPE reached a high of 88.45%, of which the content of gasoline components was 10.14% and the content of diesel components was 80.97%.     

废弃物燃烧产生的可吸入颗粒物中金属元素的排放特性研究

将纸屑、甘蔗渣、木粉、谷壳、垃圾衍生燃料（RDF）五种废弃物进行燃烧，采集其烟气中可吸入颗粒物（PM10）样品并分析，获得了颗粒物中金属元素的质量分数和排放特性，并与其相应的原料和灰烬中的金属元素质量分数比较。结果显示，废弃物燃烧的颗粒物中金属元素的种类与燃烧的物料有关；纸屑的颗粒物中金属元素的质量分数最低，RDF的最高，其余三种生物质废弃物的质量分数较相近；在五种样品中，一些重金属的质量分数很高，比土壤中的质量分数高出很多倍；金属元素在灰烬和颗粒物中的分布情况与金属元素的性质密切相关，且在可吸入颗粒物上有明显的富集。     

不同垃圾焚烧炉排放的PM10 中多环芳烃的研究

对大气可吸入颗粒物采样器进行改装，建立了垃圾焚烧炉烟气中PM10采样系统，并采集了三家垃圾发电厂焚烧炉排放烟气中的可吸入颗粒物。利用GC-MS对可吸入颗粒物中的16种多环芳烃进行定量研究，获得了多环芳烃的质量分数和浓度，并对不同环数的芳烃进行了比较，分析了不同样品中的多环芳烃的毒性参数。结果表明，颗粒物中的多环芳烃主要集中在4环、5环和6环，3环和2环所占比例较少；与燃煤电厂相比，垃圾焚烧发电厂排放的烟气中多环芳烃的浓度和毒性参数更高。     

亚临界水中生物固体废弃物水解产物中氨基酸的HPLC分析

亚临界水中生物固体废弃物水解产物中氨基酸的HPLC分析;亚临界水;生物质;固体废弃物;高效液相色谱;氨基酸;分析化学     

生态水泥

介绍了生态水泥的新概念,并对城市垃圾、污泥等废弃物的处理现状、生态水泥的生产工艺和国内外生态水泥的现状进行了论述.用城市垃圾和污泥来生产生态水泥拓宽了原材料来源,减少了天然资源的消耗,降低了水泥生产的成本,是一条很有前途的、有利于水泥工业可持续发展的途径.     

黄铁矿在维持高放废物处置库近场还原性环境中的作用

研究了黄铁矿受60Coγ射线辐照后对地下水还原性环境的影响.辐照剂量率为200Gy·min-1,总吸收剂量为5×106Gy.通过分析辐照前后以及与地下水共同辐照后黄铁矿的结构和组成,发现60Co的γ射线可使地下水发生辐解反应,从而将黄铁矿氧化;但无论是直接辐照还是与地下水共同辐照,60Co的γ辐射均不改变黄铁矿的结构.黄铁矿可以消耗地下水辐解产生的氧化性产物,有利于维持处置库近场的还原性环境,提高处置库的安全性.