Di-n-butyltin(IV)-catalyzed dimethyl carbonate synthesis from carbon dioxide and methanol: An in situ high pressure Sn{H} NMR spectroscopic study

The reactivity of five di-n-butyltin(IV) complexes, n-Bu₂Sn(OR)₂ (1), n-Bu₂SnO (3), [n-Bu₂Sn(OR)]₂O (4), (n-Bu₂SnO)₂(CO₂) (6) and (n-Bu₂SnO)₆[(n-Bu₂SnOR)₂(CO₃)]₂ (7) (R = CH₃), with CO₂, suggested as possible catalyst precursors and key-intermediates for the direct synthesis of dimethyl carbonate from carbon dioxide and methanol, has been investigated using high-pressure ¹¹⁹Sn{¹H} NMR (HP-NMR) spectroscopy. Four of the five precursors studied, i.e. 3, 4, 6 and 7 give rise to an identical ¹¹⁹Sn{¹H} NMR pattern which can be explicitly attributed to the fingerprint of the dimeric form of the 1-methoxy-3-methylcarbonatotetrabutyldistannoxane {5}₂. However, with 1, a new pair of signals is observed in addition to the characteristic ¹¹⁹Sn{¹H} NMR resonances of the dimeric hemicarbonato species {2}₂ and {5}₂, which can be attributed to the in situ formation of an unprecedented species suggested to be the trinuclear carbonato di-n-butyltin(IV) complex, 8.     

Preparation and properties of a new solid state borate ion selective electrode and its application

A new borate ion selective electrode using solid salts of Ag₃BO₃, Ag₂S and Cu₂S has been developed. Detailed information is provided concerning the composition, working pH and conditioning of the electrode. An analytically useful potential change occurred from 1 × 10⁻⁶ to 1 × 10⁻¹ M borate ion. The slope of the linear portion was 31 ± 2 mV/10-fold changes in borate concentration. The measurements were made at constant ionic strength (0.1 M NaNO₃) and at room temperature. The effect of Cl⁻, Br⁻, NO₃⁻, SO⁼₄, H₂PO₄⁻ anions and K⁺, Na⁺, Cu²⁺, Ag⁺, Ca²⁺ cations on borate response is evaluated and it was found that only Ag⁺ had a small interference effect. The lifetime of the electrode was more than two years, when used at least 4-5 times a day, and the response time was about 20-30 s. Borate content in waste water of borax factory, tap water of a town situated near to the borax factory and city tap water far from these mines were also determined. The validation was made with differential pulse polarography for the same water sample, and high consistency was obtained.     

Dynamic Effect of Operational Regulation on the Mesophilic BioMethanation of Grape Marc

Wine production annually generates an estimated 11 million metric tonnes of grape marc (GM) worldwide. The diversion of this organic waste away from landfill and towards its use in the generation of renewable energy has been investigated. This study aimed to evaluate the effectiveness of operational parameters relating to the treatment regime and inoculum source in the extraction of methane from GM under unmixed anaerobic conditions at 35 °C. The study entailed the recirculation of a previously acclimated sludge (120 days) as downstream inoculum, an increased loading volume (1.3 kg) and a low substrate-to-inoculum ratio (10:3 SIR). The results showed that an incorporation of accessible operational controls can effectively enhance cumulative methane yield (0.145 m³ CH₄ kg⁻¹ VS), corresponding to higher amounts of digestible organics converted. The calculated average volumetric methane productivity equalled 0.8802 L CH₄ L_Work⁻¹ d⁻¹ over 33.6 days whilst moderate pollutant removal (43.50% COD removal efficiency) was achieved. Molecular analyses identified Firmicutes and Bacteroidetes phyla as core organisms for hydrolytic and fermentative stages in trophic relationships with terminal electron acceptors from the methane-producing Methanosarcina genus. Economic projections established that the cost-effective operational enhancements were sustainable for valorisation from grape marc by existing wineries and distilleries.     

Highly Efficient Diglycolamide‐Based Task‐Specific Ionic Liquids: Synthesis,Unusual Extraction Behaviour,Irradiation, and Fluorescence Studies

Two new diglycolamide‐based task‐specific ionic liquids (DGA? TSILs) were evaluated for the extraction of actinides and lanthanides from acidic feed solutions. These DGA? TSILs were capable of exceptionally high extraction of trivalent actinide ions, such as Am³⁺, and even higher extraction of the lanthanide ion, Eu³⁺ (about 5–10 fold). Dilution of the DGA? TSILs in an ionic liquid, C₄mim⁺ ? NTf₂^?, afforded reasonably high extraction ability, faster mass transfer, and more efficient stripping of the metal ion. The nature of the extracted species was studied by slope analysis, which showed that the extracted species contained one NO₃^? anion, along with the participation of two DGA? TSIL molecules. Time‐resolved laser fluorescence spectroscopy (TRLFS) analysis showed a strong complexation with no inner‐sphere water molecule in the Eu^III? DGA? TSIL complexes in the presence and absence of C₄mim⁺ ? NTf₂^? as the diluent. The very high radiolytic stability of DGA? TSIL 6 makes it one of the most‐efficient solvent systems for the extraction of actinides under acidic feed conditions.     

原子荧光光谱法测定固体废弃物——氧化皮中的砷

建立了固体废弃物——氧化皮中砷的测定方法。氧化皮粉末样品经盐酸溶解,在溶液中添加硫脲和抗坏血酸预还原砷,以盐酸(2+98)为载流,硼氢化钠(10g/L)和氢氧化钾(5g/L)混合溶液为还原剂,砷与硼氢化钠、盐酸反应生成砷化氢,砷化氢利用氩气导入石英炉原子化器中原子化,以空心阴极灯为激发光源,测量砷产生的荧光强度。测试氧化皮中砷含量的相对标准偏差为不大于4.8%,检出限为0.12μg/L,回收率为97%～103%,结果准确度较好。方法具有试剂消耗少、快速、检出限低的优点。     

Ce4+替代Pu4+的模拟固化体(Gd1-xCex)2Zr2O7+x的合成及结构演变

Gd₂Zr₂O₇中Gd具有很大的中子吸收截面, 其烧绿石结构-缺陷萤石结构的转变能较低, 使其成为理想的核废料固化基材. 使用硝酸盐为原料, 添加少量NaF作助熔剂, 在较低温度下(和传统高温固相反应相比), 合成了烧绿石型Gd₂Zr₂O₇. 以Ce⁴⁺模拟Pu⁴⁺, 研究了Gd₂Zr₂O₇对锕系核素的固化, 并合成了系列模拟固化体(Gd_1-xCe_x)₂Zr₂O_7+x (0≤x≤0.6). 采用粉末X射线衍射(XRD)对系列样品进行了表征. 结果表明: 随着x值的增大,样品从烧绿石结构向缺陷萤石结构转变, 且晶胞大小基本保持恒定, 但当x=0.6时, 衍射峰明显宽化, 晶格畸变比较严重, 晶格稳定性降低. 当x=1时, 即用Ce⁴⁺完全取代Gd³⁺进行合成, 不能得到Ce₂Zr₂O₈, 产物发生了相分离, 为四方结构的(Zr_0.88Ce_0.12)O₂和萤石结构的(Ce_0.75Zr_0.25)O₂的混合物. 模拟固化体的浸出率测试表明: 当x≤0.2时, 各元素浸出率均很低, 但当x≥0.4时, 各元素的浸出率明显升高, 说明以Gd₂Zr₂O₇作为固化Pu⁴⁺的基材, Pu⁴⁺掺入量不宜高于40%.     

微波处理和溶胶凝胶法共同改性废胶粉及其与天然橡胶复合材料性能的研究

采用微波处理打断废胶粉(WRP)的三维网状结构用来提高WRP在有机溶剂中的溶胀性,然后采用溶胶凝胶法,将微波改性后的WRP浸入正硅酸乙酯中,通过水解反应和缩合反应,在WRP表面原位生成SiO2网络,从而制得改性废胶粉(MWRP).将制得MWRP与天然橡胶(NR)共混,制备了NR/MWRP复合材料,研究了NR/MWRP复合材料的性能.通过热重分析仪、差示扫描量热仪和力学分析表明微波处理最佳时间是20 s.由于微波处理提高了NR与WRP的相容性,原位生成的SiO2粒子起到了补强作用,所以所制备的NR/MWRP复合材料拥有较好的力学性能;随着Si69的加入,抑制了SiO2粒子聚集,提高了SiO2粒子的分散性,从而进一步提高复合材料的力学性能并降低复合材料的Payne效应;在进行频率扫描时,硫化胶的储存模量随频率的增大而增大;硫化胶的温度扫描结果表明,随着温度的升高,复合材料中SiO2粒子聚集程度加剧并且复合材料出现老化的现象.为了提高复合材料的耐老化性能,N,N-间苯撑双马来酰亚胺(BMI)作为一种防老剂加入复合材料中,BMI利用Diels-Aider反应补偿橡胶在老化过程中所损失的交联键并提高NR与WRP的界面相容性,从而提高复合材料的耐老化性能.     

二苯碳酰二肼分光光度法测定PCB废水中六价铬

通过添加高锰酸钾去除了废水中一些还原性物质的干扰,选用磷酸作为提供氢离子的介质,大大掩蔽了铁(Ⅲ)对实验的影响,改变显色剂的配制方法,提高了显色剂的稳定性,建立了二苯碳酰二肼分光光度法测定PCB废水中六价铬的方法。改进后测定结果的相对标准偏差小于1.5%,加标回收率为98.8%~100%,方法过程简单,分析速度快,为PCB废水中六价铬的测定提供了新的思路。     

Bifunctional coordination polymers as efficient catalysts for carbon dioxide conversion

The multidentate ligand H₂ L upon complexation with Zn (II) and Cd (II) provide a one‐dimensional polymeric networks. These coordination polymers (CPs) CP‐1 and CP‐2 containing Zn (II) and Cd (II) metals respectively are well characterized. The single crystal structural analysis confirms the formation of one‐dimensional coordination polymer with zigzag fashion in CP‐1 and ladder chain CP‐2 . Both the CPs are applied as catalysts to synthesize various cyclic carbonates from epoxides and carbon dioxide. The catalysts are giving better conversion under solvent‐free and additive‐free condition using 10 bar CO₂ and 100 °C as optimized pressure and temperature. The detailed kinetic experiments suggesting the first order kinetics, the energy of activation (Ea) is calculated for this catalytic conversion.     

利用铝废渣制备片状堇青石的影响因素研究

以铝厂废渣、高岭土、滑石为主要原料,采用固相法合成片状堇青石。分析了原料种类、原料配方、烧结温度、保温时间和晶核剂对合成堇青石的影响,并通过XRD、SEM进行表征。结果表明,原料的纯度越高合成的堇青石纯度越高;富含镁的配方能完全形成堇青石相;最佳烧成温度为1 380℃,保温时间为4 h,此时得到的堇青石纯度最高,且呈现片状结构,颗粒大小均匀;堇青石熟料可以起到晶核剂的作用,促进堇青石的生成。