An integer goal programming model for hazardous waste treatment and disposal

The improper handling and disposal of hazardous wastes cause threats to human health and the environment. One reason for the improper handling and disposal of these wastes is that not much consideration is usually given to the logistical aspects of hazardous waste systems. In this paper an integer goal programming model is developed that takes into consideration the multiple goals and needs of many groups involved in managing and planning hazardous waste systems. The model can easily be implemented and can be used to address many of the issues related to facility location, recycling, treatment, and disposal of hazardous wastes.     

Sample preparation procedure for the determination of sulphur and trace metals in oil products by the ICP with a minitorch using emulsions

A quick sample preparation method was used for the determination of sulphur and trace metals in oil and oily products by the ICP with a minitorch. Stable aqueous emulsions of oils and oil products were made by using two kinds of emulsifiers (one with low sulphur content, the other sulfonated). Aqueous standard solutions can be used for the preparation of calibration solutions. The contents of S, Al, Cr, Cu, Fe, Mg, Ni and Pb in aqueous emulsions were determined and the results were in good agreement with the composition of oil standard solutions used for control analysis procedure.     

甲醇与蓖麻油混合物运动粘度的实验研究

利用改型的乌别洛特毛细管粘度计,本文对243～353K温度范围内对质量配比为98.8:1.2的甲醇与蓖麻油混合物的运动粘度进行了实验研究,运动粘度测量结果的不确定度为1.06%,利用得到的实验数据拟合了甲醇 蓖麻油二元混合物的运动粘度方程.方程与实验数据最大偏差为3.31%,平均偏差为1.11%.     

Modelling of composting of food waste in a column reactor

The composting of organic solid waste, the mixture of fruit and vegetable leftovers enriched with night soil, was investigated in a closed thermally insulated reactor. It was found that 80.9 % of the original substrate biodegraded after 14 days. A mathematical model of the column reactor was proposed where the biodegradation rate of the organic solid waste was described using simple n-thorder kinetics. A good prediction of process performance was obtained using the proposed kinetics and experimentally obtained reaction heat. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

电位滴定法测定模拟高放废液中的游离酸

本文研究了用电位滴定法测定模拟高放废液中游离酸的方法。用草酸钾做络合剂以消除Ｆｅ＾３＋、Ａｌ＾３＋、Ｎｄ＾３＋等多种水解离子的影响，用标准碱直接进行电位滴定，即可快速准确地测定模拟高放废液中游离酸的含量。方法的相对标准偏差为１．８％，标准加入回收率为１００－１０１％，能为放射性废物固化试验提供可靠的分析数据。     

四川乌龙茶香气化学成分的剖析

四川乌龙茶在低温减压蒸馏所得香气浓缩物经气相色谱-质谱联用测定,以气相色谱保留值验证,鉴定出19个化合物,它们是:丙酮,乙酸乙酯,顺-3-己烯醇-[1],乙酸顺-3-己烯酯,苯甲醇,反-芳樟醇氧化物(呋喃型),顺-芳樟醇氧化物(呋喃型),芳樟醇,苯乙醇,反-芳樟醇氧化物(吡喃型),丁酸顺-3-己烯酯,香叶烯,己酸顺-3-己烯酯,茉莉酮,橙花叔醇,金台欢醇,茉莉酮酸甲酯,正十六烷和2,6,10,14-四甲基十五烷。     

羰基铁催化黄樟油素、丁香酚异构化反应的研究——Ⅰ.异黄樟油素、异丁香酚的合成

本文报道了异黄樟油素、异丁香酚的新合成途径,即在羰基铁光催化下或多核羰基铁加热催化下,使黄樟油素、丁香酚异构化。其转化率几乎是定量的。反应产物经GC,GC/MC分析及UV,IR,NMR,折光率的鉴定,证明合成过程中发生了异构化反应,而且产物以反式异构体为主。     

网间交联型增韧环氧树脂/蓖麻油聚氨酯互穿网络聚合物的动态力学性能和形态结构

以增韧环氧树脂(TEP)和蓖麻油聚氨酯[PU(CO)]形成的互穿网络聚合物(IPN),两网络间具有一定数量的交联点,在一定组成下,该IPN的tanδ-T曲线半峰宽达100℃,tanδ最大值接近1,阻尼性能良好。形态研究表明,该IPN既有增韧环氧树脂本身的两相结构,又有IPN的两相结构。     

缬草根化学成分的研究

本文报道了湖南花坦县产的缬草根的化学成分，用气相色谱－色谱－计算机联用和波谱技术鉴定了缬草根中的４４个组分，其中乙酸里哪醇酯，２－蒈烯，马拶铃烯，瓦伦烯，香橙烯，愈创木烯，异尼醇，乙酸金合欢酯，邻苯二甲酸二异辛酯，６，１３－二甲基－十四烷酸和２－甲基十六烷酸甲酯等化合物是在缬草根中首次发现的，对缬草根中的氨基酸和微量元素也进行了测定。