Comparison of reactivities of 1- and 4-oxotetrahydrocarbazoles in reactions with nucleophilic and electrophilic reagents

The half-wave potentials of polarographic reduction of the carbonyl group in unsubstituted and N-methyl- and N-phenylsulfonyl-substituted 1- and 4-oxotetrahydrocarbazoles and their reactivities in reactions with nucleophilic (NaBH₄, malonodinitrile, and cyanoacetamide) and electrophilic (DMF dimethyl acetal) reagents were compared. 4-Oxotetrahydrocarbazoles are much less reactive than 1-oxotetrahydrocarbazoles. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1832–1836, August, 2005.     

Electrochemical study of triphenyltin piperidyl dithiocarbamate

The reduction of triphenyltin piperidyl dithiocarbamate in acetone has been investigated using d.c. polarography and cyclic voltammetry. Polarographic reduction yielded four well-defined waves, two of which were diffusion-controlled and two of which appear to represent adsorption processes. The cyclic voltammetric study yielded results in close agreement with the polarographic data. Results appear to indicate the release of the dithiocarbamate moiety, followed by reduction to form the triphenyltin radical, which undergoes dimerization, as well as reduction to the triphenyltin anion. For comparison, the polarographic reduction of triphenyltinchloride was investigated. A mechanism similar to that proposed by earlier authors for the polarographic behaviour of tributyltin oxide was found. For convenience, the more commonly used terminology of piperidyl dithiocarbamate is used throughout the paper, in place of (piperidine-1-carbodithioato) triphenyltin (IV).     

Amperometric detection of hydrazine by cyclic voltammetry and flow injection analysis using ruthenium modified glassy carbon electrodes

Glassy carbon electrodes modified with (5-amino-1,10-phenanthroline)bis(bipyridine)ruthium(II) chloride hydrate, [(bpy)₂Ru(5-phenNH₂)]Cl₂·H₂O, are shown to oxidize hydrazine with excellent sensitivity. The presence of an amine group on the ruthenium complex facilitates electropolymerization onto the electrode surface. Using cyclic voltammetry, a large catalytic current is observed upon oxidation of hydrazine in phosphate buffer (pH 5.0), compared to the current obtained from the ruthenium-modified electrode with no hydrazine present. The sensitivity of cyclic voltammetry is sufficient for obtaining a linear calibration curve for hydrazine over the range of 10⁻⁵ to 10⁻² M. Hydrodynamic amperometry was used to determine the working potential for flow injection analysis. The limit of detection for hydrazine was determined to be 8.5 μM using FIA. The thickness of these films was shown to increase linearly with the number of electropolymerization cycles, in the range of 1000-2500 nm for 5-20 cycles, respectively, using Rutherford backscattering spectrometry (RBS). RBS analysis also suggests that the film is multilayered with the outermost layers containing a high ruthenium concentration, followed by layers where the concentration of ruthenium decreases linearly and approaches zero at the electrode surface.     

Perfluorinated anion-exchange polymer mercury film electrode for anodic stripping voltammetric determination of zinc(II): effect of model organic compounds

The determination of zinc ion (1-60 ng ml⁻¹) by anodic square-wave stripping voltammetry on an anion-exchange perfluorinated polymer Tosflex mercury film electrodes (TMFE) was evaluated. The detection limit was 0.1 ng ml⁻¹ Zn(II). The effect of various organic compounds (gelatin, albumin, starch, camphor, humic acid, Triton X-100, sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB)) is explored. The results indicate that due to the size-exclusion and ion-exchange properties of Tosflex film, the TMFE is considerably more resistant to organic interference than the bare mercury film electrode.     

Chemical species produced in the reaction between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline and their iron(II) complexes: electrochemical studies and analytical applications

The cyclic voltammetric behavior of carbon paste electrodes modified by direct admixing with the products of the reactions between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline at 100°C and that of their iron(II) complexes is reported. The ligand(s) produced in absence of iron(II) are able to complex iron(II) and copper(II) ions reversibly, but other ions such as nickel(II), cobalt(II), cadmium(II) and manganese(II), if complexed, show no electrochemical activity. Admixing with the products of the reaction in the presence of excess of iron(II) ion, because of high insolubility and fast electron exchange, produces surfaces useful for amperometric detection in continuous-flow systems. The voltammetric and amperometric behavior in the presence of HSO^?₃ ions is reported in order to illustrate this application.     

Synthesis and electrochemistry of Group 6 tetracarbonyl (N,N′-bis(ferrocenylmethylene)ethylenediamine)metal(0) complexes

Thermal substitution reaction of Cr(CO)₄(η^2:2-1,5-cyclooctadiene), Mo(CO)₄(η^2:2-norbornadiene), and W(CO)₅(η²-bis(trimethylsilyl)ethyne) with N,N′-bis(ferrocenylmethylene)ethylenediamine (bfeda) yields M(CO)₄(bfeda) complexes which could be isolated from the reaction solution and characterized by elemental analysis, MS, IR, and NMR spectroscopy. In the case of tungsten, W(CO)₅(bfeda) is formed as intermediate and then undergoes the ring closure reaction yielding the ultimate product W(CO)₄(bfeda). The electrochemical behavior of the M(CO)₄(bfeda) complexes was studied by using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) in dichloromethane with tetrabutylammonium tetrafluoroborate as electrolyte. Constant potential electrolysis of the complexes was performed successively at their peak potentials at 0 °C in their CH₂Cl₂ solution and the electrolysis was followed by in situ recording the electronic absorption spectra in every 5 mC. In the electrolysis of Cr(CO)₄(bfeda), the central Cr(0) is oxidized first and electrolysis continues with oxidations of two ferrocenyl groups until the end of totally three moles of electron passage per mole of complex. In the electrolysis of Mo(CO)₄(bfeda) and W(CO)₄(bfeda) the first oxidation occurs on the central atom forming a short-lived species which undergoes an intramolecular one-electron transfer and is reduced back to M(0) while one of the ferrocene units is oxidized to the ferrocenium cation at the same time. This indicates that the electron is transferred from iron to the central metal atom.     

Voltammetric determination of hafnium with calconcarboxylic acid

The interaction of Hf(IV) with calconcarboxylic acid (1-(2-hydroxy-4-sulfo-1-naphtylazo)-3-naphtolic acid) was investigated by cyclic voltammetry varying various factors (pH, ionic strength, contents of ethanol and scan rate). Optimal conditions of Hf(IV) determination in the presence of calconcarboxylic acid were found: acetic buffer solution pH 2.6, scan rate 0.5 Vs⁻¹. The detection limit of Hf(IV) concentration was 2.46 × 10⁻⁷ mol L⁻¹. The influence of foreign ions on the Hf(IV) determination was studied. It was established that some metals like cadmium, nickel, zinc, copper and titanium could be determined with Hf(IV) simultaneously. The method of voltammetric determination of hafnium was tested on model solutions and used in the determination of Hf(IV) in terbium-base alloy.     

Copper passivity and its breakdown in sodium bicarbonate solutions: A scanning electron microscopy and x-ray photoelectron and auger spectroscopy study

Effect of bicarbonate ions on the copper passivity and its local breakdown is studied by cyclic voltammetry, Auger spectroscopy, x-ray photoelectron spectroscopy, and scanning electron microscopy. Comparing data for solutions with various sodium bicarbonate concentrations shows copper to undergo pitting in 0.02 M NaHCO₃, whereas it remains stably passive in 0.10 M NaHCO₃. Independent studies suggest that carbonates play a protective role in stabilization of the oxide-hydroxide passive film on copper.     

Determination of BHT in the presence of surfactants using a cellulose acetate coated electrode and square wave voltammetry

A direct voltammetric method for the rapid determination of butylated hydroxytoluene has been developed. The procedure utilizes a hydrolyzed cellulose acetate film in intimate contact with a glassy carbon electrode and square wave voltammetry. The coated electrode prevents passivation due to adsorption of polymeric oxidation products by way of a size exclusion principle. BHT solutions containing lipid-like surfactants can be analyzed without the need for frequent resurfacing of the electrode.