A mild and practical method for the regioselective synthesis of N-acylated 3,4-dihydropyrimidin-2-ones. New acyl transfer reagents

The treatment of 3,4-dihydropyrimidin-2-ones with n-BuLi at −78 °C, followed by quenching with various electrophiles furnished N3-substituted derivatives, regioselectively. Further, N1,N3-diacyl derivatives were found to transfer N1-acyl groups to nucleophilic sites.     

Some polyhydroxy azo–azomethine derivatives of salicylaldehyde: Synthesis, characterization, spectroscopic, molecular structure and antimicrobial activity studies

Some new substituted polyhydroxy azo–azomethine compounds were prepared by reaction of tris(hydroxymethyl)aminomethane with (E)-2-hydroxy-5-(phenyldiazenyl) benzaldehyde and its substituted derivatives. The structures of azo and azo–azomethine compounds were determined by IR, UV–vis, ¹H NMR and ¹³C NMR spectroscopic techniques, and/or X-ray diffraction studies. According to IR spectra, all azo–azomethine compounds adopt keto form in solid state. UV–vis analysis has shown the presence of keto–enol tautomerism in solution for all azo–azomethine compounds, except that for nitro substituted derivative, enol form is dominantly favored in solution. At the same time, above mentioned derivative compounds were studied in vitro for their antimicrobial properties. Among the phenylazosalicylaldehyde series compound tested, 4-phenylazosalicylaldehyde, 4-(3-chlorophenylazo)salicylaldehyde, 4-(2-chlorophenylazo)salicylaldehyde, 4-(4-fluorophenylazo)salicylaldehyde, 4-(3-chlorophenylazo)salicylaldehyde and 4-(4-ethylphenylazo)salicylaldehyde showed a weak antimicrobial activity only against gram positive bacteria. On the contrary, phenylazosalicylaldehyde series compounds were reacted tris(hydroxmethyl)aminomethane, that exhibited a strong antimicrobial activity against gram positive bacteria, yeast and mould. Moreover, while the 2-{[1,3-dihydroxy-2-(hydroxymethyl)propan-2-ylimino]methyl}phenol did not show an inhibition on tested microorganism, the addition of phenyldiazine groups to 2-{[1,3-dihydroxy-2-(hydroxymethyl)propan-2-ylimino]methyl}phenol resulted in a strong increases in antimicrobial activity.     

Determination and fractionation of sulphur in a contaminated dredged sediment

Conversion of sulphur compounds in reduced, contaminated sediments that are brought in upland conditions may largely affect the potential mobility of heavy metal contaminants. We applied selected methods for the determination of total sulphur and sulphur fractions in a contaminated sediment in the reduced state and after gradual drying and oxidation during 1 month. Dry ashing, followed by ion chromatographic detection, was reliable for the determination of total sulphur. Good recoveries were obtained in both reference samples and spiked samples. Total sulphur was 14.5±0.6 g kg⁻¹ relative to dry sediment. Wet chemical methods that involve the determination of acid-volatile, Zn–HCl-reducible, chromium-reducible, acetone-soluble and HI-reducible sulphur were used to estimate specific sulphur forms. Results for acetone-soluble sulphur were to high and not consistent with results for other fractions. Major part of sulphur in the sediment (90%) was inorganic. Sulphides were converted partially to sulphate and to intermediary oxidised sulphur compounds upon oxidation of the sediment. The results suggested that the intermediary oxidised sulphur pool in the reduced sediment (2.5 g kg⁻¹) mainly consisted of pyrite, that was not converted during drying and oxidation. No significant changes in organic sulphur were detected.     

Polyparametric modification equation for estimating thermodynamic properties of energetic nitro compounds

Calculation methods, based on hybrid density-functional theory with the basis sets of B3LYP/ 6-311+G (2d, p)//B3LYP/6-31G(d, p)and B3LYP/6-31+G(d)//B3LYP/6-31G(d, p), were applied to determine the thermodynamic characteristics of various energetic nitro compounds. A parametric modification equation and the least-squares approach were used to identify 21 of the energetic research compounds. The atomization energies of these 21 compounds have an average relative error of 0.21–0.25% of the experimental values. The enthalpy (H _f) and the Gibbs energy (G _f) of formation have mean absolute errors of 10.8–11.4 kJ/ mol (2.6–2.7 kcal/mol) and 10.0–10.3 kJ/mol (2.4 kcal/ mol), respectively. The enthalpy and the Gibbs energy of formation obtained exceed those in the literature obtained by semiempirical calculations. The calibrated least-squares parameters and parametric equations were used to predict H _f and G _f for the five newly developed energetic nitro compounds for further applications.Acknowledgements. The authors would like to thank the National Science Council of the Republic of China for financial support of this work under grant no. NSC-91-2113-M-014-003. The National Center for High-Performance Computing providing the computation facility is also acknowledged.     

Aldol condensations over reconstructed Mg-Al hydrotalcites: structure-activity relationships related to the rehydration method

Two different rehydration procedures in the liquid or gas phase have been applied to reconstruct mixed oxides derived from calcined hydrotalcite-like materials to be used as catalysts for aldol condensation reactions. The as-synthesized hydrotalcite, its decomposition product, as well as the reconstructed solids upon rehydration were characterized by XRD, N(2) adsorption, He pycnometry, FTIR, SEM, TEM, (27)Al MAS-NMR and CO(2)-TPD (TPD=temperature-programmed desorption). Compared to the Mg-Al mixed oxide rehydrated in the gas phase (HT-rg), that rehydrated in the liquid phase (HT-rl) exhibits a superior catalytic performance with respect to the aldol condensation of citral with ketones to yield pseudoionones and in the self-aldolization of acetone. The textural properties of HT-rl and HT-rg differ strongly and determine the catalytic behavior. A memory effect led to a higher degree of reconstruction of the lamellar structure when the mixed oxide was rehydrated in the gas phase rather than in the liquid phase, although liquid-phase rehydration under fast stirring produced a surface area that was 26 times greater. This contrasts to typical statements in the literature claiming a higher degree of reconstruction in the presence of large amounts of water in the medium. CO(2)-TPD shows that the number of OH(-) groups and their nature are very similar in HT-rg and HT-rl, and cannot explain the markedly different catalytic behavior. Accordingly, only a small fraction of the available basic sites in the rehydrated samples is active in liquid-phase aldol condensations. Our results support the model in which only basic sites near the edges of the hydrotalcite platelets are partaking in aldol reactions. Based on this, reconstructed materials with small crystallites (produced by exfoliation during mechanical stirring), that is, possessing a high external surface area, are beneficial in the reactions compared to larger crystals with a high degree of intraplatelet porosity.     

Spectroscopic Studies on the Interaction of Tetramethylpyridylporphyrins and Cationic Clays

In the present work, the interaction between5,10,15,20-tetrakis(1-methyl-4-pyridyl)-21H,23H-porphine (TMPyP) and its metallated form(CoTMPyP) with three cationic clays was investigatedby X-ray diffraction (XRD), UV-VIS and resonance Ramanspectroscopies. Sodium montmorillonites K10 and KSFand a synthetic fluorohectorite (FHT) containingdifferent macrocycle loadings, were prepared by an ionexchange reaction. In nonsaturated KSF and FHT, theCoTMPyP molecule assumes a flat orientation, relativeto the host layers, giving rise to at least twoabsorption bands in the Soret region (ca. 445 and 465 nm)assigned to adsorbed and intercalated CoTMPyP,respectively. For the delaminated K10 sample, a broadband centered around 456 nm, indicates a majorcontribution from the metalloporphyrin on the clayexternal surfaces. The electronic spectra of FHTsamples containing increasing amounts of CoTMPyPshow bands red shifted even when a small amount ofporphyrin is used, suggesting that the electroniclevels of the macrocycle are more affected by theinteraction with the clay than by the metalloporphyrindistortion inside the galleries. The resonance Ramanspectra obtained for all CoTMPyP samples presentedonly minor shifts in peak positions and band width,with the exception of the FHT saturated sample, wherethe bands are clearly broader when compared to otherloadings, suggesting that porphyrin aggregation isoccurring. In the case of TMPyP, the bands at ca. 430and 468 nm were assigned to nonprotonated andprotonated molecules, respectively. This assignment issupported by resonance Raman spectroscopy, which alsoshowed the ₂ mode (ca. 1550 cm^-1) to bethe most sensitive peak to protonation.     

A mild, highly selective and remarkably easy procedure for deprotection of aromatic acetates using ammonium acetate as a neutral catalyst in aqueous medium

Ammonium acetate was found to catalyze efficiently the selective deprotection of aromatic acetates in the presence of various sensitive functionalities in aqueous methanol under neutral conditions at room temperature to yield the corresponding phenols in excellent yields. The method has been utilized for deprotection of acetates of several naturally occurring bioactive phenolic compounds and for preparation of venkatasin, a natural coumarino-lignan, from the anticancer compound cleomiscosin A.     

1H-CRAMPS Solid-State NMR and X-Ray Crystal Studies of Inclusion Complexes Formed from 3,3′-bis(9-Hydroxy-9-fluorenyl)-2,2′-binaphthyl Hosts with Acetone

The crystal structures of inclusion compounds of 3,3-bis(9-hydroxy-9-fluorenyl)-2,2-binaphthyl host (1) and its chloro (2) or bromo (3) derivatives substituted in 2,7-positions of the fluorene units with acetone guests (1A–3A) were determined by X-ray studies as well as by ¹H-CRAMPS solid-state NMR. Using this NMR technique allows identification of differently bound guest molecules due to their different chemical shifts caused by the influence of the ring current effects of the host aryl units.     

Antimicrobial properties of natural substances in irradiated fresh poultry

This study was undertaken to determine if a combined treatment (marinating in natural plant extracts or vacuum) with irradiation could have a synergetic effect, in order to reduce the dose required for complete elimination of Salmonella on fresh poultry. The effect of these combined treatments on the shelf-life extension was also evaluated. The fresh chicken legs were irradiated at 0, 3 and 5 kGy. The poultry underwent microbial analysis(mesophilic and Salmonella detection). For each treatment, the total microbial count decreased with increase of irradiation dose. The marinating treatment have a synergistic effect with irradiation treatment to reduce the total microbial count and controlling the proliferation during storage at 4°C. Irradiation of fresh chicken pieces with a dose of 3 kGy appears to be able to extend the microbial shelf-life by a factor of 2. When the chicken is marinating and irradiated at 3 kGy or when irradiated at 5 kGy without marinating, the microbial shelf-life is extended by a factor of 7 to 8. No Salmonella was found during all the experiment in the chicken in air and marinated. However, a presence of Salmonella was found in samples irradiated at 5 kGy under vacuum, in unirradiated samples and samples irradiated at 3kGy in air and under vacuum.