Novel UV assay for protein determination and the characterization of copper-protein complexes by mass spectrometry

A very simple, highly selective and sensitive assay of proteins based on the biuret absorption in the ultraviolet region has been developed. The well-known biuret assay is based on the reaction of proteins with copper ions under strong alkaline conditions to form a copper-protein complex. Yet, copper ions may seriously interfere with the determination if the measurement is made in the UV range. In the present approach, proteins mobilize copper ions from insoluble salts at different pH values, and the copper-protein complexes are investigated by UV spectrophotometry and mass spectrometry. Upon using copper phosphate, free copper ions do not interfere with the determination from 540 to 240 nm. Copper absorbance slowly increases from 240 to 190 nm where a blank with the reagents is recommended. A maximum absorbance for the copper-protein complex was found at 226 nm and high pH value. The stoichiometries of the copper-protein complexes measured directly with a mass spectrometer are pH dependent: half of the peptides without any histidine residue chelate just a single Cu²⁺ ion at pH 7.4 but each such peptide mobilizes from 1 to 6 Cu²⁺ ions at pH 10.3. To determine proteins, 1-1.5 ml of 1.8% KOH solution with 0-20 μg ml⁻¹ protein is treated with 25 mg of copper phosphate powder. The mixture is powerfully stirred, centrifuged, and the absorbance of the supernatant is measured at 226 nm in 1 cm quartz cuvettes against a blank of the reagents. The color system obeys Beer's law in the range 0.1-20 μg ml⁻¹ protein at this wavelength. The molar absorptivity value proved to be a characteristic of each protein being analyzed. Therefore, individual proteins should be used to plot calibration curves. This assay proved to be over 100 times more sensitive than the classical biuret procedure. The method is highly selective and the determination is little affected by the presence of other substances. All other important analytical parameters were studied and practical applicability of the method has been verified by the analysis of some biological materials.     

Voltammetric determination of nitroaromatic and nitramine explosives contamination in soil

The contamination of soil by nitroaromatic and nitramine explosives is widespread during the manufacture, testing and disposal of explosives and ammunitions. The analysis for the presence of trace explosive contaminants in soil becomes important in the light of their effect on the growth of different varieties of plants and crops. 2,4,6-Trinitrotoluene (TNT), cyclotrimethylene trinitramine (Research Department explosive, RDX) and cyclotetramethylene tetranitramine (high melting point explosive, HMX), other related explosive compounds and their by-products must be monitored in soil and surrounding waterways since these are mutagenic, toxic and persistent pollutants that can leach from the contaminated soil to accumulate in the food chain. In this study, a voltammetric method has been developed for the determination of explosive such as RDX, HMX and TNT. The electrochemical redox behavior of RDX, HMX and TNT was studied through cyclic voltammetry and quantitative determination was carried out by using square wave voltammetry technique. Calibration curves were drawn and were linear in the range of 63-129 ppm for RDX with a detection limit of 10 ppm, 49-182 ppm for HMX with a detection limit of 1 ppm and 38-139 ppm for TNT with a detection limit of 1 ppm. This method was applied to determine the contaminations in several soil samples that yielded a relative error of 1% in the concentrations.     

New macrocycles with planar chirality-synthesis and determination of absolute configurations

A versatile system for preparing macrocyclic compounds with planar chirality is presented. In this system chiral diazacoronands are synthesized readily from lariat-type diesters 13 and 14 and unsymmetrical diamines 7, 8, 12, 15, and 16 under non-high-dilution conditions. The title compounds were subjected to structural analysis by X-ray crystallography and circular dichroism spectroscopy, and absolute configurations for two representative examples (compounds 2 and 3) were assigned by molecular modeling. The correctness of the theoretical approach was verified by the crystallographic results obtained experimentally.     

A novel spectrophotometric method for batch and flow injection determination of sulfite in beverages

A novel spectrophotometric assay method for batch and flow injection determination of sulfite in beverages is described. The method involves a reaction with diaquacobyrinic acid heptamethyl ester (diaquacobester, DACbs) in acetate buffer of pH 3 to form a highly stable sulfite cobester complex (SO₃Cbs). In the absence of sulfite, the reagent displays three absorption maxima at 349, 409 and 525 nm. Addition of sulfite is associated with the development of a new absorption band at 313 nm, an increase in the intensity of the band at 425 nm and a decrease in the absorbance of the bands at 349 and 525 nm. Variations of the absorptions at 313, 349, 425 and 525 nm are linearly proportional to sulfite concentrations over the range of 0.05–25 μg ml⁻¹with a detection limit of 0.01–0.2 μg ml⁻¹. Negligible interferences are caused by most common ions. Validation of the method according to the quality assurance standards shows suitability for quality control assessment of sulfite in complex matrices without prior treatment. The method has the advantages of high selectivity, good sensitivity, fast reaction, high stability of the reagent and reaction product and absorbance measurements at four different wavelengths in the same run. The method is successfully applied to determine the sulfite contents of some beverages. The results compare fairly well with data obtained using the standard method.     

Voltammetric studies on the electrochemical determination of methylmercury in chloride medium at carbon microelectrodes

Electroanalytical techniques have been used to determine methylmercury at low levels in environmental matrices. The electrochemical behaviour of methylmercury at carbon microelectrodes in a hydrochloric acid medium using cyclic, square wave and fast-scan linear-sweep voltammetric techniques has been investigated. The analytical utility of the methylmercury reoxidation peak has been explored, but the recorded peak currents were found to be poorly reproducible. This is ascribed to two factors: the adsorption of insoluble chloromercury compounds on the electrode surface, which appears to be an important contribution to hinder the voltammetric signal of methylmercury; and the competition between the reoxidation of the methylmercury radical and its dimerization reaction, which limits the reproducibility of the methylmercury peak. These problems were successfully overcome by adopting the appropriate experimental conditions. Fast-scan rates were employed and an efficient electrochemical regeneration procedure of the electrode surface was achieved, under potentiostatic conditions in a mercury-free solution containing potassium thiocyanate—a strong complexing agent. The influence of chloride ion concentration was analysed. Interference by metals, such as lead and cadmium, was considered. Calibration plots were obtained in the micromolar and submicromolar concentration ranges, allowing the electrochemical determination of methylmercury in trace amounts. An estuarine water sample was analysed using the new method with a glassy carbon microelectrode.     

The non-centrosymmetric borate oxides, MBi2B2O7 (M=Ca, Sr)

Two novel noncentrosymmetric borates oxides, MBi₂B₂O₇ or MBi₂O(BO₃)₂ (MCa, Sr), have been synthesized by solid-state reactions in air at temperatures in the 600-700 °C range. Their crystal structures have been determined ab initio and refined using powder neutron diffraction data. CaBi₂B₂O₇ crystallizes in the orthorhombic Pna2₁ space group with a=8.9371(5) Å, b=5.4771(3) Å, c=12.5912(7) Å, Z=4, R_wp=0.118, χ²=2.30. SrBi₂B₂O₇ crystallizes in the hexagonal P6₃ space group with a=9.1404(4) Å, c=13.0808(6) Å, Z=6, R_wp=0.115, χ²=4.15. Large displacement parameters suggest the presence of disorder in SrBi₂B₂O₇ as also revealed by diffuse 2×a superstructure reflections in electron diffraction patterns. Both structures are built of identical (001) neutral layers of corner-sharing BO₃ triangles and MO₆ trigonal prisms forming six-membered rings in which Bi₂O groups are located. Adjacent layers are stacked in a staggered configuration and connected through weak Bi-O bonds. A moderate efficiency for second harmonic generation (SHG) has been measured for a powder sample of CaBi₂B₂O₇ (d_eff=2d_eff(KDP)).     

Determination of copper and nickel in vegetable oils by direct sampling graphite furnace atomic absorption spectrometry

The quality of food products has been receiving great attention due to its influence on human nutrition and health. In this sense, the determination of trace metals in foods has turned an important field on food analysis. Concerning vegetable oils, its metal trace composition is an important criterion for the assessment of their quality once it is known that trace metals affect their rate of oxidation, influencing freshness, keeping properties as well as storage. In the present work an analytical method which enables the direct determination of Cu and Ni in vegetable oils by graphite furnace atomic absorption spectrometry (GFAAS), using a “solid” sample strategy is presented: in nature, samples are directly weighed on the graphite platform boat and inserted in the graphite tube. An adequate temperature program permitted the calibration by external aqueous analytical curves. Good concordance between the proposed procedure and EPA procedures was found in the analysis of real samples. Limits of detection of 0.001 and 0.002 μg g⁻¹ were found for Cu and Ni, respectively, in the original samples, and they were comfortably below the concentrations found.     

TCF selenium preconcentration in geological materials for determination at sub-mugg(-1) with INAA (Se/TCF-INAA)

In geological samples, Se concentration ranges from 1 × 10⁻⁹ g g⁻¹ up to 1 × 10⁻³ g g⁻¹. The analytical difficulty at low concentration (<1 μg g⁻¹), is one of the main reasons why the geological cycle of Se is poorly known. The analytical method that consisted of preconcentration of Se with thiol cotton fiber (TCF) followed by graphite furnace atomic absorption spectrometry (GFAAS) has been modified by finishing with instrumental neutron activation analysis (INAA). The modified technique involves sample dissolution (HF-HNO₃-H₂O₂) and evaporation to dryness at low temperature (55-60 °C) to avoid selenium volatilization. Se^VI is converted to Se^IV by adding 6 M HCl to the dry residuum and the solution is then heated in a covered boiling bath (95-100 °C). The solution is diluted to obtain 0.6 M HCl and then collected on TCF. The TCF is placed in a polyethylene vial for irradiation in the SLOWPOKE II reactor (Montréal) for 30 s at a neutron flux of 10¹⁵ m⁻² s⁻¹. The 162 keV peak of ^77mSe (half-life 17.36 s) is read for 20 s after a decay of 7 s. The amount of sample to be dissolved is controlled by two competing effects. To obtain low detection limits, a larger amount of sample should be dissolved. On the other hand, the TCF could become saturated with chalcophile elements when large sample is used. Sulfur is a good indicator of the amount of Se and chalcophile elements present. In S poor sample (<100 μg g⁻¹) 3.0 g of sample was used and the L_D was ∼2 ng g⁻¹. In S high samples (>1.5% S) 0.05 g of sample was used and the L_D was ∼120 ng g⁻¹. The present work also includes suggested Se concentration for eight international geological reference materials (IGRM) that compare favorably with literature values.     

A flow-based enzyme-linked immunosorbent assay on a polydimethylsiloxane microchip for the rapid determination of immunoglobulin A

A flow-based enzyme-linked immunosorbent assay (ELISA) on a polydimethylsiloxane (PDMS) microchip has been developed for the rapid determination of immunoglobulin A (IgA). The analytical principle of this integrated method is the same as the conventional sandwich-type ELISA. A primary antibody (anti-IgA) was adsorbed on the surface of a PDMS microchannel, and then an antigen (IgA) and a secondary antibody (anti-IgA HRP labeled) were reacted successively. The resulting antigen-antibody complex, fixed on the surface of the microchannel, was detected using Amplex^® Red and a fluorescent imaging system. The calibration curve of the IgA standard solution was linear in the range of 0-50 ng/mL at the flow rate of 10 μL/min. This flow rate corresponds to the reaction time of 4.8 s. Compared to the conventional assay on a 96-well microtiter plate, the present assay on the microchip dramatically shortened the reaction time necessary for the enzyme-substrate reaction from 30 min to 4.8 s, i.e., to 1/375. The amounts of the reagent and sample were also reduced to 1/100 compared to the 96-well microtiter plate.     

HPLC Fingerprint with Multi-components Analysis for Quality Consistency Evaluation of Traditional Chinese Medicine Si-Mo-Tang Oral Liquid Preparation

Si-Mo-Tang(SMT) oral liquid preparation, a traditional Chinese medicine, was prepared from four crude herbal drugs, Fructus Aurantii Submaturus, Radix Aucklandiae, Semen Arecae and Radix Linderae Aggregatae. A combinative method using HPLC fingerprint and quantitative analysis was developed and validated for quality consistency evaluation of SMT. Individual HPLC chromatograms were evaluated against the mean chromatogram generated via a similarity evaluation computer program. Data from chromatographic fingerprints were also processed with principal component analysis(PCA) and hierarchical cluster analysis(HCA). Additionally, six components (naringin, isonaringin, hesperidin, neohesperidin, norisoboldine and potassium sorbate) in SMT were simultaneously determined to interpret the quality consistency. For fingerprint analysis, 20 peaks were selected as the characteristic peaks to evaluate the similarities of 26 SMT collected from different manufacturers. Among the 20 characteristic peaks, 10 peaks were assigned to be naringin, hesperidin, neohesperidin, isonaringin, neoeriocitrin, tangeretin, nobiletin, norisoboldine, 5-(ethoxymethyl)furan-2-carbaldehyde and potassium sorbate, respectively. The results of similarity analysis, PCA and HCA, indicate that the samples from different manufacturers were consistent with each other in composition. The results from the quantitative data show that the contents of six compounds were significantly different in SMT oral liquid preparations from different manufacturers. The combinative method of chromatographic fingerprint with quantitative analysis developed here offered an efficient way for the quality consistency evaluation of the traditional Chinese medicine SMT.