Indeno[1,2,3,4-pqra]Perylene: A Medium-Sized Aromatic Hydrocarbon Exhibiting Full-Range Visible-Light Absorption

We report the synthesis and properties of indeno[1,2,3,4-pqra]perylene, which was prepared by the fusion of one anthracene unit with one naphthalene unit via three carbon-carbon bonds. The synthetic route through two-fold C−H arylation enabled not only the synthesis of unsubstituted indenoperylene, but also rapid access to its arylated derivatives on the gram scale. Indenoperylene is a medium-sized aromatic hydrocarbon with the composition C₂₄H₁₂ that is isomeric to coronene. Nevertheless, its absorption covers the entire visible region owing to its small HOMO-LUMO gap. Furthermore, indenoperylene exhibits high stability despite the absence of peripheral substituents. We propose that the unique electronic structure of indenoperylene originates from the coexistence of an electron-withdrawing subunit (benzoaceanthrylene) and an electron-donating subunit (perylene). The electronic properties of indenoperylene were modulated via post-functionalization through regioselective bromination. The current research demonstrates that indenoperylene is a promising candidate as a main skeleton for near-infrared-responsive and redox-active materials.     

Magnetic retrievable Ag/AgBr/ZnFe2O4 photocatalyst for efficient removal of organic pollutant under visible light

In the present work, a visible-light-driven Ag/AgBr/ZnFe₂O₄ photocatalyst has been successfully synthesized via a deposition–precipitation and photoreduction method. The crystal structure, chemical composition, morphology and optical properties of the as-prepared nanocomposites were characterized by X-ray diffraction spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscope, UV–vis diffuse reflectance spectroscopy and photoluminescence. The photocatalytic activities of the Ag/AgBr/ZnFe₂O₄ nanocomposites were evaluated through the photodegradation of gaseous toluene and methyl orange (MO) under visible light. The results revealed that the as-prepared Ag/AgBr/ZnFe₂O₄ nanocomposite exhibited excellent photocatalytic activity. The degrading efficiency of MO could still reach 90% after four cycles, and the Ag/AgBr/ZnFe₂O₄ nanocomposite could be recycled easily by a magnet. Additionally, the enhanced photocatalytic mechanism was discussed according to the trapping experiments, which indicated that the photo-generated holes (h⁺) and •O₂⁻ played important roles in photodegradation process. At last, a possible photocatalytic oxidation pathways of toluene was proposed based on the results of GC–MS. The Ag/AgBr/ZnFe₂O₄ composites showed potential application for efficient removal of organic pollutant.     

Cu-Bi纳米粉体的制备及其可见光光催化性能研究

以Cu（NO3）2、Bi（NO3）3、COfNH）2为原料,聚乙二醇（PEG）为分散剂,采用均匀共沉淀法制备了Cu-Bi催化剂,用X-射线粉末衍射法、能量色散法、透射电镜和紫外－可见漫反射光谱法对催化剂的组成、粒径大小、表面形貌和光学吸收性能进行了详细表征,并以酸性大红和亚甲基蓝为目标降解物,考察了所制备的Cu－Bi催化剂在可见光下的光催化性能。实验结果表明,该催化剂为类球形纳米粉体,粒度均匀,粒径约50nm。在可见光作用下,该催化剂对酸性大红和亚甲基蓝均表现出良好的光催化性能,且在240min前,对酸性大红的降解率要优于亚甲基蓝;240min后则两者的降解效果相近。     

2D/3D ZnIn2S4/TiO2复合物的原位构筑及其提高的光催化性能

通过高温煅烧和油浴的方法构筑二维/三维(2D/3D) ZnIn₂S₄/TiO₂异质结, 应用于光催化降解罗丹明B (RhB)和四环素(TC), 来研究异质结的构筑对TiO₂可见光响应范围和光生载流子对分离效率的影响. 结果表明, TiO₂维持了MOFs的形貌, 显示窄的可见光响应范围和高的光生电荷复合率, 与ZnIn₂S₄纳米片复合后, TiO₂的比表面积增大, 光催化活性位点增多. 带隙宽度也由TiO₂的3.23 eV减小到ZnIn₂S₄/TiO₂-II的2.52 eV, 从而获得了更宽的可见光响应范围. 能带结构表明ZnIn₂S₄/TiO₂是type II型异质结, 提高了光生载流子对的分离与转移效率. 在可见光照射下, ZnIn₂S₄/TiO₂-II显示了最高的RhB光催化降解效率(93%), 分别是TiO₂和ZnIn₂S₄的18和2倍. 同时, ZnIn₂S₄/TiO₂-II也显示出比TiO₂和ZnIn₂S₄更高的TC降解效率(90%). 循环实验表明ZnIn₂S₄/TiO₂-II能保持良好的稳定性, 经5次循环实验后仍能降解83%的RhB. 研究表明基于MOFs衍生的TiO₂构筑2D/3D ZnIn₂S₄/TiO₂异质结是提高TiO₂光催化性能的一条有效途径.     

Zr离子掺杂TiO2可见光催化剂光催化活性的研究

本文采用溶胶-凝胶法制备了Zr离子掺杂TiO₂光催化剂。光催化降解对氯苯酚实验表明,Zr离子掺杂浓度为10%时活性最高,其紫外光、可见光催化活性分别是纯TiO₂的1.5倍和4倍。利用XRD、Raman、XPS、UV-Vis DRS、PL等技术对样品进行了表征,结果表明：Zr离子以取代式掺杂方式进入TiO₂晶格,在TiO₂导带下方形成掺杂能级,增强了可见光响应,促进了光生载流子的分离,此外Zr离子掺杂在催化剂表面引入大量表面缺陷,增加了表面羟基物种,从而使得Zr离子掺杂TiO₂光催化剂的紫外、可见光催化活性显著提高。     

C自掺杂TiO2纳米棒的制备与光催化性能研究

本文以TiC为前驱体和掺杂源,采用一步水热法合成了具有可见光吸收的C自掺杂金红石相TiO_2纳米棒.样品的结构、形貌、化学态和光学性质等可通过X射线衍射仪(XRD)、扫描电子显微镜(SEM)、傅里叶变换红外光谱仪(FT-IR)、X射线光电子能谱仪(XPS)以及紫外可见分光光度计(UV-vis)来表征.所合成的样品具有较强的光催化活性,可通过在可见光照射下降解有机染料罗丹明B(RhB)来验证.C自掺杂TiO_2所呈现的较强光催化活性是由于其具有小的能带间隙(2.74 eV)、大的比表面积和高的电子-空穴对分离率.     

g-C3N4催化石墨化碳质材料的制备及光催化性能研究

通常采用以氢氧化物作为造孔剂,过渡金属硝酸盐或氯化物作为石墨化催化剂的传统两步法策略制备多孔石墨化碳材料。然而制备过程中多涉及有毒和腐蚀性试剂,且多步骤的过程耗时较长。本文以双氰胺为原料通过热缩聚反应得到g-C₃N₄,采用高铁酸钾为催化剂一步法实现g-C₃N₄的同步碳化-石墨化,并研究其光催化性能。与传统的两步法相比,该方法耗时少、效率高、无污染。与初始的g-C₃N₄材料相比,石墨化g-C₃N₄衍生碳质材料不仅显著改善了可见光的吸收,而且大大增强了光催化活性。研究了不同石墨化温度对g-C₃N₄衍生碳质材料在可见光下降解甲基橙溶液的影响。700 ℃下制备的衍生碳质材料的降解率为12.4 mg/g。光电化学测试结果表明,多孔g-C₃N₄衍生碳质材料的光生载流子密度、电荷分离和光电流(提高了5.4倍)均得到显著提高。因此,该简便、灵活方法为提高g-C₃N₄衍生碳质材料的吸附和光催化性能提供了一种有前景的、高效的途径。     

Visible Light-Driven Alkyne-Grafted Ethylene-Bridged Azobenzene Chromophores for Photothermal Utilization

Molecular photoswitches are considered to be important candidates in the field of solar energy storage due to their sensitive and reversible bidirectional optical response. Nevertheless, it is still a daunting challenge to design a molecular photoswitch to improve the low solar spectrum utilization and quantum yields while achieving charging and discharging of heat without solvent assistance. Herein, a series of visible-light-driven ethylene-bridged azobenzene (b-Azo) chromophores with different alkyne substituents which can undergo isomerization reactions promoted in both directions by visible light are reported. Their visible light responsiveness improves their solar spectrum utilization while also having high quantum yields. In addition, as the compounds are liquids, there is no need to dissolve the compounds in order to exploit this switching. The photoisomerization of b-Azo can be adjusted by alkyne-related substituents, and hexyne-substituted b-Azo is able to store and release photothermal energy with a high density of 106.1 J·g⁻¹, and can achieve a temperature increase of 1.8 °C at a low temperature of −1 °C.     

A Methylthio‐Functionalized‐MOF Photocatalyst with High Performance for Visible‐Light‐Driven H2 Evolution

Recently, the emergence of photoactive metal–organic frameworks (MOFs) has given great prospects for their applications as photocatalytic materials in visible‐light‐driven hydrogen evolution. Herein, a highly photoactive visible‐light‐driven material for H₂ evolution was prepared by introducing methylthio terephthalate into a MOF lattice via solvent‐assisted ligand‐exchange method. Accordingly, a first methylthio‐functionalized porous MOF decorated with Pt co‐catalyst for efficient photocatalytic H₂ evolution was achieved, which exhibited a high quantum yield (8.90 %) at 420 nm by use sacrificial triethanolamine. This hybrid material exhibited perfect H₂ production rate as high as 3814.0 μmol g^?1 h^?1, which even is one order of magnitude higher than that of the state‐of‐the‐art Pt/MOF photocatalyst derived from aminoterephthalate.     

Tunable Water‐Soluble Supramolecular Polymers by Visible‐Light‐Regulated Host–Guest Interactions

The development of artificial self‐assembling systems with dynamic photo‐regulation features in aqueous solutions has drawn great attention owing to the potential applications in fabricating elaborate biological materials. Here we demonstrate the fabrication of water‐soluble cucurbit[8]uril (CB[8])‐mediated supramolecular polymers by connecting the fluorinated azobenzene (FAB) containing monomers through host‐enhanced heteroternary π–π stacking interactions. Benefiting from the unique visible‐light‐induced E→Z photoisomerization of the FAB photochromophores, the encapsulation behaviors between the CB[8] macrocycle and the monomers could be regulated upon visible light irradiation, resulting in the depolymerization of such CB[8]‐mediated supramolecular polymers.