Proton magnetic relaxation study of water orientation around I− and Li+

Proton relaxation time measurements are performed for 6m aqueous solutions of⁷LiI and⁶LiI in D₂O containing small amounts of H₂O. The measurements are done at low temperatures and yield maxima of the relaxation rate plotted against 1/T. From the maxima of the relaxation rates, proteon-I^– and proton-Li⁺ distances in the first coordination sphere of the ions are determined, and from the knowledge of the ion-water oxygen distance it is shown that for iodide a somewhat broadened H-bonded configuration is valid and that for Li⁺ the electric dipole orientation deviates from the radial direction. In order to test the reliability of the method a proton-¹²⁷I interaction study is also performed in KI solution in glycerol. The I-H distance obtained is in satisfactory agreement with that found in the aqueous system.     

单向应力条件下松弛时间率相关的非线性粘弹性本构模型

基于单向拉伸实验研究和内变量理论 ,提出了一种新的简单的一维非线性粘弹性本构关系 .对两种粘弹性材料 ,即高密度聚乙烯和聚丙烯进行了不同加载速率作用下的拉伸实验研究 ,实验结果表明 ,两种材料的应力应变关系与加载速率相关 ;对材料的应力应变实验数据进行拟合发现 ,材料的松弛时间具有很强的应变率相关性 ,当应变率发生数量级变化时 ,材料的松弛时间也发生数量级的变化 .采用内变量理论 ,导出了在单轴应力条件下松弛时间率相关的非线性粘弹性本构关系的迭代形式 ,并给出其收敛条件 .当采取一次迭代形式时 ,本构关系退化为松弛时间率相关的Maxwell模型 .数值拟合的结果表明 ,一次迭代形式的本构关系就可以很好地拟合和预测实验结果 .     

聚合物异核交叉弛豫及二维NOE谱

The heteronuclear cross-relaxation rates in polymers were determined by selective and conventional ~(13)C spin-lattice relaxation experiments, the proton-carbon distances were calculated by the theoretical formula, and two-dimensional NOE spectra of the polymers were also measured. The results showed that (1) the measured proton-carbon distances coincide with the distances from molecular models, (2) there is the observable dipolar cross-relaxation effect between the quaternary carbons and their neighboring protons, and (3) the optimum mixing times depend on the relaxation properties of the proton and carbon.     

Study of the segmental dynamics in semi-crystalline poly(lactic acid) using mechanical spectroscopies

The glass transition of poly(L-lactic acid) (PLLA) occurs not far above typical service temperatures (room or body temperatures) which has consequences on the material properties during its use, such as damping or the occurrence of structural relaxation. This work aims at characterising the glass transition dynamics of a semi-crystalline PLLA using both dynamic mechanical analysis (DMA) and thermally stimulated recovery (TSR). The main viscoelastic parameters have been characterised at 1 Hz using DMA and the master curve obtained after isothermal experiments at different temperatures provided a full picture of the solid-state rheological behaviour throughout a wide frequency range. The activation energies calculated from the shift factors agree with the TSR ones, exhibiting a maximum near the T(g). Above the T(g), the results can be described with the WLF model. In the glassy state, the activation energy decreases with decreasing temperatures being always higher than the prediction of the Adam and Gibbs theory, at least down to temperatures 30 degrees C below the T(g). This suggests the existence of non-arrested degrees of freedom in the glassy state, being consistent with the existence of a significant degree of cooperativity in the TSR results.     

Polymerization-induced phase separation in polyether-sulfone modified epoxy resin systems: effect of curing reaction mechanism

Polyethersulfone (PES)-modified epoxy systems with stepwise reaction were studied throughout the entire curing process by using optical microscopes, time-resolved light scattering (TRLS), and a rheolometry instrument compared with that of chainwise polymerization. The results suggested that the phase separation process is mainly controlled by the diffusion of epoxy oligomers for stepwise mechanism system and by that of epoxy monomers for chainwise mechanism system. In case of high PES content (SPES-20%) light-scattering results showed a viscoelastic phase separation and the characteristic relaxation time of phase separation can be described well by the WLF equation. However, in the case of low PES content (SPES-14%) secondary phase separation phenomenon was observed by Optical Microscope and further demonstrated by rheological study.     

Statistical properties of aggregation with injection

We study a generalized aggregation process in which charged particles diffuse and coalesce randomly on a lattice. For one-dimensional and mean-field models, we show that there exists a statistically-invariant steady state when randomly charged particles are continuously injected. The steady-state charge distribution obeys a power law with the exponent depending both on the type of the injection and on the spatial dimension. The response of the system to a perturbation (i.e., relaxation) is characterized by either a power law decay (t ^– ,1) or a compressed exponential decay [exp(–t ),>1].     

On the validity of the counterpoise correction for the basis set superposition error including the fragment relaxation terms

It is demonstrated that relatively large geometrical changes make Emsley et al.'s assumption (J Am Chem Soc (1978) 100:3303) on the counterpoise correction for the basis set superposition error including the fragment relaxation terms unacceptable. Received: 23 September 1997 / Accepted: 31 October 1997     

Effect of high-voltage pulses on electrochemical properties of a molten magnesium electrolyte

Effects of high-voltage pulses on electrochemical properties of a molten magnesium electrolyte is studied experimentally. It is established that the electroconductivity of the melt subjected to the pulses and the electrolysis current at a constant voltage increase by up to 25%. The relaxation time of nonequilibrium melt reaches a few tens of minutes and under certain conditions its dynamics is oscillatory.     

Structure relaxation after temperature jumps in homogeneous polystyrene/poly(styrene-co-bromostyrene) blends

Concentration fluctuations in polymer blends and their change after a temperature jump were studied by time-dependent small angle X-ray scattering experiments. Measurements were conducted on homogeneous mixtures of polystyrene and a partially brominated derivative. Structure factors in thermal equilibrium show the form given by the random phase approximation, thus enabling a direct determination of the-parameter and the mean radius of gyration. TheT-dependence of can be understood as the result of superposed enthalpic contributions and a free volume term. In theT-jump experiments, samples were quenched to temperatures near T_g. Relaxation occurs on the time scale of minutes and is nonexponential, becoming slower with time. Initial relaxation rates increase with increasing scattering vectorsq in accordance with theoretical predictions.     

The asymmetrical orientational behavior of compatible blends of PMMA and PVC

The orientation and relaxation behavior of compatible blends of poly(methyl methacrylate) (PMMA) and poly(vinyl chloride) (PVC) was investigated. The deformation was performed at 9 K above the glass transition temperature. Based on birefringence and IR-dichroic measurements, it was found that the orientation of PMMA is strongly increased in the blends as compared to pure PMMA at identical draw ratios.The orientation of PVC, on the other hand, is not changed by blending. The results are discussed in terms of friction coefficients and their enhancement by molecular interactions.Dedicated to Prof. E. W. Fischer on the occasion of his 665th birthday