Controlled structure and density of “living” polystyrene brushes on flat silica surfaces

Thin layers of polystyrene were grown from surface-grafted nitroxide initiators via controlled “living” free radical polymerization. The “reactive” Langmuir-Blodgett deposition method allowed an effective control of the initiator layer density leading to PS brushes with different and high grafting density and stretching. The influence of the grafting density on the layer structure was studied. Comparison with theoretical predictions for monodispersed brushes in bad solvent was discussed. The thickness was found to vary linearly with molecular weight and the density dependence was shown using wetting measurements. Special features of controlled radical nitroxide polymerization from a surface were discussed. A direct comparison of the molecular weight and polydispersity between surface and bulk polymers was made by de-grafting the brushes into a toluene/HF solution. Finally, some evidence of a “surface Fischer” effect was shown from re-initiated layers. Received 20 December 2001     

Preliminary results of a non-spherical aerosol method for the retrieval of the atmospheric aerosol optical properties

There is experimental evidence that the non-sphericity of certain atmospheric particles can cause scattering properties different from those predicted by standard Mie theory. Numerous studies indicate the need to consider the presence of non-spherical particles in modeling the optical properties of atmospheric aerosols. On the other hand, natural aerosols show a great variety of shapes, making difficult a realistic choice of a particle shape (or shape mixture) model. In this paper, we test a parameterization of the particle shape in the retrieval of size distribution, phase function, single scattering albedo and asymmetry parameter from direct and sky-radiance measurements. For this purpose we have substituted the Kernel based on the Mie theory included in the model SKYRAD.PACK by one derived for non-spherical particles. The method is applied under different atmospheric conditions, including Saharan dust outbreak, polluted and local mineral episodes. We compare the results with those obtained by the well known spheroids algorithm used in the AERONET network.     

Density Correlations in the Two-Dimensional Coulomb Gas

We consider a two-dimensional Coulomb gas of positive and negative pointlike unit charges interacting via a logarithmic potential. The density (rather than the charge) correlation functions are studied. In the bulk, the form-factor theory of an equivalent sine-Gordon model is used to determine the density correlation length. At the surface of a rectilinear plain wall, the universality of the asymptotic behavior of the density correlations is suggested. A scaling analysis implies a local form of the compressibility sum rule near a hard wall. A symmetry of the Coulomb system with respect to the Möbius conformal transformation, which induces a gravitational source acting on the particle density, is established. Among the consequences, a universal term of the finite-size expansion of the grand potential is derived exactly for a disk geometry of the confining domain.     

Amorphous Fe–Mg alloy thin films: magnetic properties and atomic vibrational dynamics

Amorphous (a-) Fe _x Mg_1?x alloys are interesting materials for the investigation of non-Debye-like low-energy vibrational excitations. We have prepared a-Fe _x Mg_1?x alloy thin films (0.3 ≤ × ≤0.7) by vapour quenching. The amorphous state was confirmed by conversion electron Mössbauer spectroscopy between 4.2–300 K, and the x- and temperature-dependence of the isomer shift and hyperfine magnetic field was measured. For x= 0.6 and 0.7, magnetic ordering occurs below ~150 K. The atomic vibrational density of states, g(E), was determined by nuclear resonant inelastic scattering, providing clear evidence for the non-Debye-like low-energy vibrational excitations.     

An efficient lasing action from pyrromethene 556 dye-doped organically modified silicates

Organically modified solid-state silicates (ORMOSILS) doped with a new laser dye 1,3,5,7,8-pentamethylpyrromethene-2,6-disulfonate-BF₂ complex (pyrromethene 556) have been synthesized by a sol-gel method and the compositional effects on pore characteristics, fluorescence and lasing properties have been investigated. It is found that the use of dimethylsulfoxide and γ-glycidoxypropyltrimethoxysilane could greatly change the structure properties of sol-gel derived ORMOSILS cage, and thus the fluorescence and lasing properties of the materials could improve significantly. A successful laser oscillation from this dye-doped ORMOSILS sample has been achieved upon pumping with a Q-switched frequency-doubled Nd:YAG laser at 532 nm. A slope efficiency of 54% with a useful lifetime greater than 10,000 shots has been demonstrated at a pump repetition rate of 1 Hz and a pump intensity of 1 J/cm² by using the new ORMOSILS cage on our newly designed laser system. Our results have shown that it is possible to obtain a high-efficiency with a long-lifetime for a compact new laser device by low cost dye-doped solid-state ORMOSILS.     

Assembly and Photophysics of Ternary Luminescent Lanthanide Molecular Complex Systems

In this paper, according to the molecular fragment principle, a series of eight ternary luminescent lanthanide complex systems were assembled, and whose compositions were determined with elemental analysis and infrared spectrum: Ln(MA)₃(L)·H₂O, where Ln = Sm, Eu, Tb, Dy; HMA = α‐methylacrylic acid; L = 1,10‐phenanthroline (phen), 2,2′‐bipyridine (bipy). The photophysical properties of these functional molecular systems were studied with ultraviolet‐visible absorption spectrum, and fluorescence excitation and emission spectrum. It was found that the heterocylic compounds (phen and bipy) act as the main energy donor and luminescence sensitizer for their suitable energy match and effective energy transfer to the emission energy level of Ln³⁺ ions. MMA ligand was only used as the terminal structural ligand to influence the luminescence. Especially terbium complex systems show the strongest luminescence for the optimum energy match and transfer between phen (bipy) and Tb³⁺ ion.     

Studies on thermal and morphological properties of 1,1-bis(3-methyl-4-cyanatophenyl)cyclohexane-epoxy-bismaleimide matrices

A new cyanate ester monomer, 1,1-bis(3-methyl-4-cyanatophenyl)cyclohexane has been synthesized and characterized. Epoxy modified with 4, 8 and 12% (by weight) of cyanate ester were made using epoxy resin and 1,1-bis(3-methyl-4-cyanatophenyl)cyclohexane and cured by using diaminodiphenylmethane. The cyanate ester modified epoxy matrix systems were further modified with 4, 8 and 12% (by weight) of bismaleimide (N,N′-bismaleimido-4,4′-diphenylmethane). The formation of oxazolidinone and isocyanurate during cure reaction of epoxy and cyanate ester blend was confirmed by IR spectral studies. Bismaleimide-cyanate ester-epoxy matrices were characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and heat deflection temperature (HDT) analysis. Thermal studies indicate that the introduction of cyanate ester into epoxy resin improves the thermal degradation studies at the expense of glass transition temperature. Whereas the incorporation of bismaleimide into epoxy resin enhances the thermal properties according to its percentage content. However, the introduction of both cyanate ester and bismaleimide influences the thermal properties according to their percentage content. DSC thermogram of cyanate ester modified epoxy and bismaleimide modified epoxy show unimodel reaction exotherms. The thermal degradation temperature and heat distortion temperature of the cured bismaleimide modified epoxy and cyanate ester-epoxy systems increased with increasing bismaleimide content. The morphology of the bismaleimide modified epoxy and cyanate ester-epoxy systems were also studied by scanning electron microscopy. Copyright © 2003 John Wiley & Sons, Ltd.     

开关结构对a-SiTFT-LCD光学特性的影响

分析非晶硅薄膜晶体管在a-SiTFT-LCD中的开关特性，讨论这种开关结构中的主要功能膜材料尺寸与性能参量、光刻制备工艺，存储电容以及栅脉冲延迟效应等对a-SiTFT-LCD的通断电流比，信号响应与保持特性，图像亮度与对比度等光学特性的影响。     

C D : a computer program to generate 1D, 2D and 3D grids of functions dependent on the molecular ab initio electron density

A program to compute many functions dependent on the electron density ρ(r) from the results of ab initio molecular calculations is presented. The program allows the generation of different one-, two-, and three-dimensional grids for further graphical representation or numerical analysis. Other options like extracting separate atom contributions to the function computed or locating maximum and minimum values are also implemented. A number of illustrative applications regarding different ρ(r)-dependent functions are presented and the performance and portability of the program is discussed.     

Novel ethero atoms containing polyesters based on 2,6‐naphthalendicarboxylic acid: A comparative study with poly(butylene naphthalate)

Poly(butylene naphthalate) (PBN), poly(diethylene naphthalate) (PDEN), and poly(thiodiethylene naphthalate) (PTDEN) were synthesized and characterized in terms of chemical structure and molecular weight. The polyesters were examined by TGA, DSC, and DMTA. All the polymers showed a good thermal stability, even though depending on chemical structure. At room temperature they appeared as semicrystalline materials; the effect of the introduction along the PBN polymer chain of ether oxygen atoms or sulfur ones was a lowering in the T_g value, a decrement of T_m, and a decrease of the crystallization rate. Changing in chemical structure also affects the main α absorption associated with the glass transition which moves to lower temperature and whose energetic requirements decrease. The results were explained as due to the presence of highly flexible C? S? C or C? O? C bonds in the polymeric chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1694–1703, 2007