Hemocompatibility of poly(acrylonitrile-co-N-vinyl-2-pyrrolidone)s: swelling behavior and water states

Hemocompatibility is an essential aspect of blood contacting polymers. Knowledge of the relationship between polymer structure and hemocompatibility is important in designing such polymers. In this work, the effect of swelling behavior and states of water on the hemocompatibility of poly(acrylonitrile-co-N-vinyl-2-pyrrolidone) (PANCNVP) films was studied. Platelet adhesion and plasma recalcification time tests were used to evaluate the hemocompatibility of the films. Considering the importance of surface properties on the hemocompatibility of polymers, static water contact angles were measured by both sessile drop and captive bubble methods. It was found that, on the film surface of PANCNVP with a higher NVP content, adhered platelets were remarkably suppressed and the recalcification time was longer. The total water content adsorbed on the PANCNVP film was determined through swelling experiments performed at temperatures of interest. Differential scanning calorimetry and thermogravimetric analysis were used to probe the states of water in the films. Based on the results from these experiments, it was hypothesized that the better hemocompatibility of PANCNVP films with higher NVP contents was due to their higher free water content, because water molecule exchange at the polymer/liquid interface, facilitated by a high free water content, is unfavorable for the formation of surface bound water, which causes poor hemocompatibility. [diagram in text].     

Thermal degradation of vinylidene chloride/vinyl chloride copolymers in the presence of N-substituted maleimides

As a consequence of their excellent barrier properties vinyl chloride/vinylidene chloride copolymers have long been prominent in the flexible packaging market. While these polymers possess a number of superior characteristics, they tend to undergo thermally- induced degradative dehydrochlorination at process temperatures. This degradation must be controlled to permit processing of the polymers. Three series of N-substituted maleimides (N-alkyl-, N-aralkyl, and N-aryl) have been synthesized, characterized spectroscopically, and evaluated as potential stabilizers for a standard vinyl chloride/vinylidene chloride (85 mass%) copolymer. As surface blends with the polymer, these compounds are ineffective as stabilizers. However, significant stabilization may be achieved by pretreatment of the polymer with N-substituted maleimides. The most effective stabilization of the polymer is afforded by N-aralkyl- or N-arylmaleimides, most notably, N-benzylmaleimide and N-p-methoxyphenylmaleimide.     

内吸性杀菌剂三唑醇(酮)立体异构体的研究Ⅱ

三唑醇(Triadimenol,又称Baytan)是一种优良的内吸性广谱杀菌剂。谷类作物的种子经处理后,防治病虫害的效果极为突出,可增产粮食20%。此化合物化学名称为1-(对-氯苯氧基)-1-(1′,2′,4′-三氮唑-1′基)-3,3二甲基丁醇-2,结构式(Ⅰ)见后。由于分子中含有两个手性碳原子,故应有四种光学异构体。我们实验室曾分离出毫克量的三唑醇两个非对映异构体(A体和B体),生物测定表明两者的药效有明显差別,并确定有效者为A体。根据~1H-NMR中偶合常数,     

Temperature-sensitive luminescence of tris (β-diketone) europium chelates for monitoring high-speed cationic photopolymerizations

The temperature-dependent luminescence of tris (β-diketone) chelates of europium was used for in situ temperature measurements during cationic photopolymerizations of vinyl ethers. These molecular-level luminescent probes provided a real-time, noninvasive method for monitoring temperature during these high-speed polymerizations. Two specific probes, tris (benzoyl-1, 1, 1-trifluoroacetone) europium and tris (1,1,1,5,5,5,-hexafluoroacetylacetone) europium, met several stringent spectral and performance requirements for application in our system. The luminescence from these probes exhibits a reproducible temperature dependence over a wide temperature range and is not sensitive to changes in viscosity. In situ temperature profiles obtained using this novel technique verified the importance of thermal effects during these highly exothermic photopolymerizations. These studies have demonstrated the utility of the tris(β-diketone) europium chelates for characterizing the temperature during high-speed photopolymerizations that cannot be monitored using conventional techniques. © 1995 John Wiley & Sons, Inc.     

A facile approach to surface graft vinyl acetate onto polyolefin articles

A facile and environment friendly approach was developed to graft vinyl acetate (VAc) onto plastic articles in an aqueous solution using tert‐butyl alcohol (TBA) as a compatiblizer and benzoyl peroxide (BPO) as an initiator. In a novel setup, excessive monomer suspended in a water phase, VAc could be conveniently grafted on the model substrate of low‐density polyethylene (LDPE) film and the graft percentage (GP) could be developed up to 7.3%. Reaction temperature could increase GP significantly, while adding monomer over a critical volume did not influence GP. By adding some paradioxybenzene, i.e. 0.06–0.08% in VAc phase, homopolymer PVAc could be avoided practically, while graft polymerization proceeded favorably in aqueous solutions. It was proved by attenuated total reflection‐infrared (ATR‐IR) spectroscopy that grafted VAc was located mainly at the surface of the LDPE film and hydrophilic nature of both grafted and alcoholyzed films were improved via contact angle measurements. Copyright © 2004 John Wiley & Sons, Ltd.     

A novel intumescent flame-retardant system containing metal chelates for polyvinyl alcohol

A novel flame retardant containing phosphorous-nitrogen structure, the ammonium salt of 2-hydroxyl-5,5-dimethyl-2,2-oxo-1,3,2-dioxapho sphorinane (PNOH), was synthesized and its structure was characterized by ¹H NMR and FTIR spectra. PNOH was used together with ammonium polyphosphate (APP) to prepare a novel intumescent flame retardant (IFR) for polyvinyl alcohol (PVA). When a few amounts (0.5%) of metal chelates were added, the flame retardancy of the IFR-PVA systems was significantly improved, having a high LOI value of 34.2 in a total IFR loading of 15 wt.%. In order to have an understanding of the resulting flame retardant effects, the thermal degradation behaviors of IFR-PVA systems were investigated by thermogravimetric analysis (TGA), and the morphology and structures of residues generated in different conditions were investigated by scanning electronic microscopy (SEM) and FTIR spectra. The results show that NiSAO can promote the thermal stability of the IFR-PVA; the residual char containing polyphosphoric or phosphoric acid is formed during the combustion; the formation of a continuous and dense char layer could inhibit the transmission of heat during contacting with flame and shows good flame retardancy.     

高选择性透过二氧化硫气体分离膜的研究 （Ⅳ）不同烃基乙烯基亚砜接枝聚乙烯醇膜的透过性能

研究了不同烃基乙烯基亚砜接枝聚乙烯醇（ＰＶＡ－ＲＶＳＯ，Ｒ＝Ｍｅ，Ｅｔ，ｔ－Ｂｕ，Ｐｈ）膜对纯ＳＯ２、Ｎ２的透过性能以及ＳＯ２／Ｎ２混合气体的分离性能．结果表明上述膜对ＳＯ２具有高的选择性．对不同烃基乙烯基亚砜接枝膜进行了比较．     

Studies on the thermotropic liquid crystalline polymer. XII. Synthesis and properties of crosslinkable thermotropic liquid crystalline homo- and copoly(ether-ester)s

A series of crosslinkable thermotropic liquid crystalline poly(ether-ester)s and copoly(ether-ester)s was prepared. All of the polymers were crosslinked by thermal treatment or photo-irradiation upon heating. The thermal stability and thermal crosslinking reaction of these polymers were investigated. These polymers also could be crosslinked by copolymerization with vinyl monomers, such as styrene or methyl methacrylate. The crosslinked polymers exhibited thermotropic liquid crystalline behavior after softening by heating. The phase behavior of linear polymers and crosslinked polymers was studied by differential scanning calorimetry (DSC) and an optical polarizing microscope equipped with a heating stage. © 1995 John Wiley & Sons, Inc.     

模板法制备聚乙烯咔唑及其复合物纳米管有序阵列

近十几年来,纳米管引起了人们越来越多的关注,不仅仅是由于它独特的性质,也因为它们在电、磁以及光电器件上具有广泛的应用前景。纳米管的制备方法大体上分为两种:自组装法[1￣3]和模板法[4￣7]。尽管自组装法已成功地制得了一些纳米管,但由于它对构造纳米管的材料有着较严格的     

乙烯基聚硅氧烷共聚反应竞聚率的测定及其对复合粒子形态的影响

用Ｆｉｍｅｍａｎ－Ｒｏｓｓ法处理数据，测定了乙烯基聚硅氧烷（ＳＶ）与苯乙烯（ＳＴ）、甲基丙烯酸甲酯（ＭＭＡ）和甲基丙烯酸正丁酯（ｎ－ＢＭＡ）的共聚反应的竞聚率，结果为ｒＳＴ＝１．４５和ｒＳＶ＝１．０８，ｒＭＭＡ＝０．７８和ｒＳＶ＝２．０１，ｒｎ－ＢＭＡ＝０．４６和ｒＳＶ＝３．４９．以含ＳＶ的乳液作为种子进行烯类单体的乳液聚合，单体和ＳＶ共聚反应对复合粒子的形态有很大影响。