Temperature memory effect and its stability revealed via differential scanning calorimetry in ethylene‐vinyl acetate within glass transition range

In this article, we reveal the temperature memory effect (TME) in a commercial thermoplastic polymer, namely ethylene‐vinyl acetate (EVA), within its glass transition range via a series of differential scanning calorimeter (DSC) tests. In addition, we investigate the influence of heating holding time and also compare the observed TME in current study with that of shape memory alloys (SMAs). It is concluded that the TME via DSC (without any macroscopic shape change) is achievable within the glass transition range of a polymer. Conversely, although the observed TME shares the many similar features as those in SMAs, due to the nature of micro‐Brownian motion in the glass transition of polymers, the resulted TME is strongly affected by the heating holding time. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1731–1737     

Copper immobilized onto polymer‐coated magnetic nanoparticles as recoverable catalyst for ‘click’ reaction

Copper supported on polymer‐coated magnetic nanoparticles was designed and synthesized as a separable heterogeneous catalyst. The catalyst was fully characterized using several techniques such as Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, scanning and transmission electron microscopies, X‐ray diffraction, vibrating sample magnetometry, thermogravimetric analysis and inductively coupled plasma atomic emission spectrometry. All results showed that copper was successfully supported on the polymer‐coated magnetic nanoparticles. Also, results showed that the synthesized material can be used as an efficient catalyst for the preparation of a series of 1,4‐disubstituted 1,2,3‐triazoles from corresponding halides, alkynes and sodium azide. The catalyst can be easily isolated from the reaction solution by applying an external magnet and reused for nine runs without any significant loss of catalytic activity.     

Hydrodechlorination of Dichloromethane by a Metal-Free Triazole-Porphyrin Electrocatalyst: Demonstration of Main-Group Element Electrocatalysis**

In this work, the electrocatalytic reduction of dichloromethane (CH₂Cl₂) into hydrocarbons involving a main group element-based molecular triazole-porphyrin electrocatalyst H2PorT8 is reported. This catalyst converted CH₂Cl₂ in acetonitrile to various hydrocarbons (methane, ethane, and ethylene) with a Faradaic efficiency of 70 % and current density of −13 mA cm⁻² at a potential of −2.2 V vs. Fc/Fc⁺ using water as a proton source. The findings of this study and its mechanistic interpretations demonstrated that H2PorT8 was an efficient and stable catalyst for the hydrodechlorination of CH₂Cl₂ and that main group catalysts could be potentially used for exploring new catalytic reaction mechanisms.     

A degradable atom transfer radical polymerization inimer: Synthesis,polymerization, and cleavage of the resulting polymer products

A novel degradable inimer for atom transfer radical polymerization (ATRP), 2‐(6‐(2‐((2‐bromo‐2‐methylpropanoyl)oxy)ethyl)pyridin‐2‐yl)ethyl methacrylate (PyDEBrMΑ), was synthesized by the two‐step esterification of 2,6‐pyridinediethanol, first with α‐bromoisobutyryl bromide in order to introduce the initiator moiety, and then with methacryloyl chloride in order to introduce the monomer moiety. PyDEBrMA was subsequently used to initiate the self‐condensing ATRP of methyl methacrylate (MMA) to obtain a hyperbranched MMA homopolymer which could be cleaved at the PyDEBrMA residue either by treatment under mildly alkaline hydrolysis conditions (sodium deuteroxide in d₆‐DMSO at room temperature) or thermolysis at 150 °C. The lability of the PyDEBrMA residue arises from the presence in its structure of two 2‐(pyridin‐2‐yl)ethyl ester moieties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2831–2839     

Fabrication and Optimization of Poly(vinyl alcohol)/Zirconium Acetate Electrospun Nanofibers Using Taguchi Experimental Design

This paper presents an investigation regarding poly(vinyl alcohol)/zirconium acetate (organic–inorganic) (PVA/Zrace) nanofibers prepared by electrospinning which could be used as a precursor for fabricating ceramic metal oxide nanofibers. The effect of some processing variables, including polymer solution concentration, tip to collector distance and applied voltage of electrospinning, and the amount of Zrace and their interactions, on the diameter of the nanofibers were studied. Taguchi experimental design and a statistical analysis (ANOVA) were employed and the relationship between experimental conditions and yield levels determined. It was concluded that to obtain a narrow diameter distribution as well as maximum fiber fineness, a polymer concentration of 10 wt%, tip to collector distance of 18 cm and applied voltage of 20 kV variables were the optimum. Furthermore, it was also concluded that the ratio of Zrace (6 g) to PVA solution (10% wt) played an important role for achieving the minimum fiber diameter. Under these optimum conditions, the diameters of the electrospun composite fibers ranged from 86 nm to 381 nm with a diameter average of 193 nm. The experiments were done with Qualitek-4 software with “smaller is better” as the quality characteristics. The optimized conditions showed an improvement in the fibers diameter distribution and the average fibers diameter showed good resemblance with the result predicted using the Taguchi method and the Qualitek-4 software. The ANOVA results showed that all factors had significant effects on the fibers diameter and distribution, but the effect of PVA concentration and zirconium acetate were more significant than the other factors.     

KINETIC STUDY OF ALKOXIDE PROMOTED DECOMPOSITION OF ORGANIC PHOSPHONIUM COMPOUNDS Evidence for Hexacovalent Intermediate

Abstract

This study reports rate data of the alkoxide promoted decomposition of triphenyl 3-hydroxypropyl phosphonium chloride, diphenyl di(3-hydroxypropyl)phosphonium chloride, and tetraphenyl phosphonium bromide. Comparison of kinetics, rate constants, and activation parameters of the alkoxide promoted decompositions points to different mechanism as compared to the hydroxyl promoted reaction. The alkoxide reaction is believed to proceed via a hexacovalent intermediate. Reasons for the hexacovalent route are discussed.     

Poly(vinyl alcohol)/melamine phosphate composites prepared through thermal processing: thermal stability and flame retardancy

Poly(vinyl alcohol)/melamine phosphate composites (PVA/MP) as a novel halogen‐free, flame‐retardant foam matrix were prepared through thermal processing, and then their thermal stability and flame retardancy were investigated by thermo‐gravimetric analysis, micro‐scale combustion calorimeter, cone calorimeter, vertical burning test, and limiting oxygen index (LOI) test. It was found that the thermal stability and combustion properties of the PVA/MP composites could be influenced by the addition of MP. Compared with the control PVA sample (B‐PVA), in the PVA/MP (75/25) composites, the temperature at 5% mass loss (T_5%) decreased about 10°C, the residual chars at 600°C increased by nearly 27%, the temperature at the maximum peak heat release rate (T_P) shifted from 292°C to 452°C, and the total heat released and the heat release capacity (HRC) decreased by 28% and 14%, respectively. Moreover, the PVA/MP composites could reach LOI value up to 35% and UL94 classification V‐0, showing good flame retardancy. At the same time, both Fourier transform infrared and X‐ray photoelectron spectroscopy spectra of the residual chars from the PVA/MP composites demonstrated that the catalytic effect of MP on the dehydration and decarboxylation reactions of PVA, and the chemical reactivity of MP during the chars‐forming reactions could be used to account for the changed thermal stability and flame retardancy of the PVA/MP composites. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of novel poly(aminophosphonate ester)s flame retardants and their applications in EVA copolymer

Novel oligomeric intumescent flame retardants, poly(amino phosphonate ester)s (PAPEs), containing both phosphorous and nitrogen, were synthesized by reacting diethyl phosphite with two different polyschiff bases obtained from the reaction of diamines with dialdehyde. The target PAPEs (designated as PAPE‐d and PAPE‐e, respectively) were characterized by ¹H NMR, ³¹P NMR, Fourier Transform infrared spectroscopy, elemental analysis, gel permeation chromatography and thermogravimetric analysis (TGA) techniques. Thermal stability and flammability of ethylene‐vinyl acetate copolymer (EVA)/PAPE blends with various PAPE content were investigated by TGA, limited oxygen index (LOI), vertical burning test (UL‐94) and microscale combustion colorimeter (MCC). The results indicate that PAPEs effectively improve the flame retardancy of EVA. The EVA/30%PAPE‐e blend has a LOI value of 28, and its peak heat release rate (PHRR) value in MCC measurement is reduced by 36%. At the same time, the EVA/PAPE blends also have high yield of residual char, indicating that PAPEs are effective charring agents. Scanning electron microscopy observations of the residues of the EVA/PAPE blends show the existence of compact char layer on the surface of the residues, which is responsible for the improvement of the flame retardancy of EVA. Copyright © 2012 John Wiley & Sons, Ltd.     

Lightweight Polymer Composites from Waste Materials: A Solution to Environmental Pollution

Several new lightweight polymer concretes derived from industrial, agricultural, and naturally occurring waste materials were investigated. Various physicomechanical properties of these materials were studied. Such inexpensive and lightweight polymer composites, which have properties superior to ordinary reinforced cement concrete, may find wide applications in building technology and related areas and may serve as better substitutes for cement. Furthermore, recycling of such wastes from various sources may help to solve the present environmental pollution problems.     

Poly(vinyl alcohol)-based Amphiphilic Copolymer Aggregates as Drug Carrying Nanoparticles

A series of amphiphilic polyisobutylene-block-poly(vinyl alcohol) (PIB-b-PVA) copolymers of constant PIB and varying PVA block length was synthesized by living carbocationic polymerization and their solution behavior was studied. The synthesis involved the preparation of polyisobutylene-b-poly(tert.-butyl vinyl ether) followed by hydrolysis with hydrogen bromide. The copolymers were characterized by gel permeation chromatography, ¹H-NMR, and MALDI-TOF MS methods. The micellization behavior of the copolymers was investigated in aqueous media by direct dissolution and dialysis using static and dynamic light scattering. The critical micelle concentration, micelle size, aggregation number, and micelle shape were determined. The ability of the aggregates as drug carrying nanodevices was also investigated by doping them with indomethacin. UV-Vis measurements showed that the solubility of indomethacine increased significantly. Our findings suggest that the solubility is largely dependent upon the block segment ratios.