Synthesis and characterization of single crystals of the layered copper hydroxide acetate Cu2(OH)3(CH3COO)·H2O

Single‐crystals of the layered copper hydroxide acetate Cu₂(OH)₃(CH₃COO)·H₂O were synthesized by heating copper acetate solution at 60 °C. The standard synthesis of the title compound based on slow titration of copper acetate solution with NaOH yielded materials with worse morphology and an additional phase present. The obtained products were characterized with powder X‐ray diffraction, high temperature powder X‐ray diffraction, scanning electron microscopy and infrared spectroscopy. The crystal structure was determined from single‐crystal X‐ray diffraction data, collected both at 120 K and at 293 K. The title compound crystallizes in the monoclinic botallackite‐type layered structure, space group P 2₁, with the lattice parameters a = 5.5776(3) Å, b = 6.0733(2) Å, c = 18.5134(8) Å, β = 91.802(4)° and a = 5.5875(4)Å, b = 6.0987(4) Å, c = 18.6801(10)Å, β = 91.934(5)° for 120 K and for 293 K, respectively. Acetate groups and water molecules are interlayered between corrugated sheets of edge‐sharing CuO6 octahedra exhibiting strong distortion resulted from the Jahn‐Teller effect. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

相变气凝胶的设计合成及其微环境调控性能研究

人体微环境调控可以通过材料本身性能的调控实现穿着凉爽舒适,对提高生活品质、减少碳排放具有重要价值.然而传统材料仅能单向地实现致冷或保温,同一材料实现致冷、保温双向功能,依然是本领域重要挑战和值得及时探索的方向.本文采用冷冻-解冻制备水凝胶与冷冻干燥技术,设计合成系列以聚乙烯醇和相变微胶囊为骨架的相变气凝胶.此类相变气凝...     

Characterization and catalytic performance of basaltic dust as an efficient catalyst in the liquid‐phase esterification of acetic acid with n‐butanol

Three natural basaltic samples were collected and used as efficient catalysts for the liquid‐phase synthesis of n‐butyl acetate. The samples were characterized by X‐ray fluorescence analysis (XRF), X‐ray diffraction (XRD), thermogravimetry (TG), differential thermal analysis (DTA), Fourier transform infrared (FT‐IR), scanning electron microscopy (SEM), and N₂ sorption. The acidity of the samples was determined using isopropanol dehydration, and the strength of the acid sites was measured using chemisorption of basic probes. The catalytic activity of the samples towards the esterification of acetic acid with n‐butanol was extensively examined. The influence of different parameters, such as the reaction refluxing time, molar ratio, catalyst loading, reusability, and calcination temperature, on the esterification reaction was studied in detail. The results revealed that all samples had high catalytic activity with a selectivity of 100% to n‐butyl acetate formation. In addition, the sample obtained from the top hill of Volcano had the highest activity with a 80% yield of n‐butyl acetate. Moreover, the significant catalytic performances were well correlated with the acidity of the samples and to the reaction rate constants.     

Novel two step synthesis of bis/Mono 1-aryl-1H-tetrazole-5-carboxylic acid

Some novel compounds of bis/mono 1-aryl-1H-tetrazole-5-carboxylic acid are synthesized by the hydrolysis of two different synthesized esters, they are ethyl-1-aryl-1H-tetrazole-5-carboxylate and ethyloxo(1-aryl-1H-tetrazol-5-yl)acetate. The ethyl-1-aryl-1H-tetrazole-5-carboxylate is resistant to get hydrolyzed, whereas the ethyloxo(1-aryl-1H-tetrazol-5-yl) acetate undergoes hydrolysis process and converts the ester to title compound. All the synthesized compounds are characterized by IR, ¹H and ¹³C NMR, mass and elemental analysis.The ethyl-1-aryl-1H-tetrazole-5-carboxylateis optimized by DFT B3LYP method and the HOMO and LUMO energy is 5.14?eV and also there is a formation of a weak bond between O₁₈ and C₈ as observed from the AIM analysis result.     

The influence of temperature on the phase behavior of ionic liquid aqueous two-phase systems

In this article, the equilibrium behavior of solutions of 1-ethyl-3-methylimidazolium dimethyl phosphate ([Emim]DMP) and ethyl acetate or acetone in aqueous two-phase system (ATPS) was discussed to understand the liquid–liquid equilibrium (LLE) behavior of these organic solvents. Thus, we determined phase diagrams and LLE data at 303.15, 308.15, 313.15, and 323.15 K for the investigated biphasic systems. Four empirical equations were used to study the tie lines. The results showed that for the [Emim]DMP?+?acetone?+?water biphasic systems within the investigated temperature range, temperature influences the phase behavior, but for the [Emim]DMP?+?ethyl acetate?+?water biphasic systems within the investigated temperature range, there are no notable changes on the phase behavior with rising temperature. The results may have important applications for the separation of antibiotics and for the recovery of ionic liquids (ILs).     

含芳香基团的梳状聚合物型降凝剂与沥青质协同改善合成蜡油的流变性

采用流变学实验、 差示扫描量热(DSC)分析、 显微观察及沥青质沉淀实验研究了聚丙烯酸十八酯-马来酸酐(POM)、 聚丙烯酸十八酯-马来酸酐-苯胺(POMA)及聚丙烯酸十八酯-马来酸酐-萘胺(POMN)梳状聚合物对合成蜡油的流变性能的影响规律. 实验结果表明, 这3种梳状聚合物降凝剂均能在一定程度上改善不含沥青质合成蜡油(MO-1)的低温流变性, 其中POM对MO-1蜡油的流变性改善效果最佳. 添加500 mg/kg POM后, MO-1的凝点从29 ℃降至23 ℃, 屈服值从627.20 Pa降至83.35 Pa. 而POM, POMA和POMN可以显著改善含0.3%(质量分数)沥青质的合成蜡油(MO-2)的低温流变性, 且添加500 mg/kg POMA后MO-2蜡油的流变改善效果最佳: 凝点降至3 ℃, 屈服值降至1.27 Pa. 可见, 本文制备的梳状聚合物降凝剂均能与沥青质协同改善MO-2蜡油的流变性, 并且向POM中引入芳香基团能进一步促进沥青质与降凝剂分子的相互作用, 进而增强梳状聚合物降凝剂与沥青质的协同作用.     

H4SiW12O40/乙烯-乙烯醇共聚物复合纳米纤维膜的制备及光催化性能

利用静电纺丝技术制备了H₄SiW₁₂O₄₀(SiW₁₂)/乙烯-乙烯醇共聚物(EVOH)复合纳米纤维膜. X射线能谱(EDX)和红外光谱(IR)表征结果表明, SiW₁₂负载到EVOH纤维膜中, 且其Keggin结构完好无损. SiW₁₂/EVOH复合纳米纤维膜在氙灯光源照射下对甲基橙(MO)表现出优异的光催化活性. 当EVOH与SiW₁₂的质量比为2:1时, MO降解率可达96.3%. 复合纳米纤维膜优异的光催化活性主要归于EVOH与SiW₁₂的协同相互作用. 复合纤维膜具有良好的可重复使用性, 循环使用3次后, 其光催化活性没有明显下降. 因此, SiW₁₂/EVOH复合纳米纤维膜在去除废水中有机染料方面具有广阔的应用前景.     

将密度泛函理论计算纳入高等化学教学初探——对乙酸乙酯碱性水解机理的理论研究

使用Gaussian 09软件对乙酸乙酯碱性水解反应的机理进行了研究。本研究融合了本科教学中有机化学、物理化学和结构化学的相关知识,以乙酸乙酯水解机理为问题导向,阐述了研究和解决问题的思路和方法,探索了将第一性原理计算引入高等教育的方式。     

Synthesis and characterization of novel functional poly(vinyl alcohol-co-styrene sulfonic acid) copolymers

This paper first time reports the preparation of random anionic copolymers from vinyl acetate (VAc) bearing electro-donating substituent and sodium 4-vinylbenzenesulfonate (SSA) having electro-withdrawing substituent. Copolymers (PVA-co-SSA) of different composition have been successfully prepared by a simple free radical solution polymerization technique. Resulting final copolymer contained neutral hydrophilic as well as ionizable ion exchange sites. Evaluation of spectral data obtained from Fourier transform Infrared spectroscopy, Raman spectroscopy, and ¹H Nuclear magnetic resonance helped in identifying and confirming the chemical structure of copolymers. Characterization of copolymers by gel permeation chromatography revealed high molecular weight with moderate polydispersity index. Analysis of thermal stability and glass transition temperature of copolymers by thermogravimetric analysis and differential scanning calorimetry were found in between corresponding homopolymers. Physicochemical properties of PVA-co-SSA can be beneficial for prospective advanced application in the niche area of smart membrane technology for energy and environment.     

Acetate chitosan with CaCO3 doping form tough hydrogel for hemostasis and wound healing

In recent years, chitosan has been applied for wound management due to its properties of biocompatibility, biodegradability, antimicrobial activity, and low immunogenicity. But the poor water solubility in neutral pH limited its further application in clinical wound healing. To overcome this problem, acetate chitosan was developed and approved as commercial products for wound healing. However, the acidity of acetate chitosan was potentially allergenic, and the poor mechanical properties of its formed hydrogels also hindered the therapeutic efficacy in wound care. In this study, CaCO₃ was simply doped into acetate chitosan to form the wound dressing. After absorbing water, the H⁺ of acetate chitosan reacted with CaCO₃ to release Ca²⁺, resulting in acidity decreased. The production of Ca²⁺ and residue of CaCO₃ cross‐linked with chitosan to form a tough hydrogel by electrostatic interaction. The physical characteristics, swelling, mechanical testing, and blood clotting were evaluated. The results in vitro demonstrated that after doping CaCO₃ into acetate chitosan, the mechanical properties and blood clotting of the formed hydrogel were increased. Then, the evaluation of hydrogels in vivo revealed that it can also accelerate the wound healing by promoting re‐epithelization and collagen deposition. This simple way by doping CaCO₃ into acetate chitosan can increase wound healing, and it can also broad the application of acetate chitosan in clinical use.