Surface composition and property of film prepared with aqueous dispersion of polyurethaneurea-acrylate including fluorinated block copolymer

The aqueous dispersion of polyurethaneurea-acrylate (PUA) including small amount of fluorinated block copolymers containing carboxyl groups (PATF), which can be dissolved in water, was used to make films and the surface properties of these films were examined. The experimental data show that the modified PUA film exhibits a hydrophobic surface property, although the original surface of PUA film is hydrophilic. The surface composition of the modified PUA film was measured by ATR and XPS. The results indicate that there is a concentration gradient of the fluorine groups along the lines of thickness of the modified film and towards the outmost surface layer, resulting from the migration of fluorinated blocks to the air side surface of the modified PUA film during the film formation process. However, the PUA film can not be modified effectively by adding the sodium salt of PATF, since the urethane groups in the system are easy to occupy on the surface of the film.     

水合醋酸铈直接热分解制备超细氧化铈及其抛光性能

Ultra fine ceria was prepared by calcining hydrate cerium acetate. The effects of pyrolysis temperature on the particle size, morphology, specific surface area and loose packing density of ceria were investigated, and the removal rate of optical glasses polishing by ceria was determined. The results show that with the increase of pyrolysis temperature, the loose deposit density and crystallinity increases and the specific surface area decreases, however, the particle size decreases firstly and then increases, the minimum medium particle size D₅₀ is 0.47 μm at pyrolysis temperature of 1 000 ℃. The SEM images of ceria prepared by the decomposition at 800 ℃ or at 1 100 ℃ show porous powders or quasi-sphere small particles with loosely agglomeration, respectively. It was found that the removal rate varied with pyrolysis temperature in preparation of ceria and the property of glass polished. The removal rate for three kinds of glasses was in the order of ZF7> F1> K9, and the maximum value appeared at around 1 000 ℃ for ZF7 and F1, and at around 1 100 ℃ for K9.     

Mercury(II) mediated cyclisation of R-1-(1′-hydroxyethyl)-2-(1″-propenyl)-3-alkoxy-4-methoxybenzenes to chiral isochromanes

A protocol has been established for the transformation of chiral ortho 1-hydroxyethyl propenyl benzenes under both anaerobic and oxidative mercury(II) mediated conditions to produce chiral isochromanes. Further transformations of the former products yielded chiral isochromanquinones, while the latter afforded the corresponding chiral 4-hydroxyisochromanquinones.     

聚己内酯聚醚嵌段共聚物和共混物的表面性质对其药物释放行为的影响

聚己内酯聚醚嵌段共聚物和共混物的表面性质对其药物释放行为的影响王卫华，贝建中，王智峰，王身国（中国科学院化学研究所北京１０００８０）关键词聚己内酯聚醚嵌段共聚物，共混物，电子能谱，表面性质，药物释放行为聚己内醋（ＰＣＬ）具有优良的药物通透性和生物相容...     

双亲半柔性两嵌段共聚物在溶液中自组装形态的模拟退火研究

针对一系列疏溶剂嵌段与溶剂间的相互作用,用模拟退火方法研究了双亲半柔性两嵌段共聚物在溶液中的自组装形态.模拟结果显示共聚物在溶液中均形成核-壳聚集体,其中疏溶剂嵌段形成聚集体的核,亲溶剂嵌段形成聚集体的壳.当上述相互作用较小时,核呈球形,而壳如同长在核上的刺.随着上述相互作用的增大,核逐渐增大.在较大的相互作用时,核呈柱形;而随着相互作用的加大,长在核上的刺逐渐伏贴于核表面.在更大的相互作用时,核又呈球状,壳伏贴于核表面.     

马来酸酐与乙酸乙烯酯交替共聚合反应的研究

本文研究了马来酸酐（MAn）在过氧化苯甲酰（BP）引发作用下与醋酸乙烯酯（VAc）的交替共聚反应。红外光谱证明了交替共聚物的结构，分析结果表明共聚物是由反应单体技1：1摩尔比例组成。当c（BPO）＝6．8×10~（－3）moi／L，c（VAc）＝3．4×10~（－3）mol／L，p（MAn）＝32．7g／L，63～65℃反应18小时，转化率可达92％以上。     

Determination of thermodynamic properties of macroporous glycidyl methacrylate‐based copolymers by inverse gas chromatography

Macroporous crosslinked poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) (PGME) was synthesized by suspension copolymerization and modified by ring‐opening reaction of the pendant epoxy groups with ethylene diamine (EDA). Inverse gas chromatography (IGC) at infinite dilution was applied to determine the thermodynamic interactions of PGME and modified copolymer, PGME‐en. The specific surface areas of the initial and modified copolymer samples were determined by the BET method, from low‐temperature nitrogen adsorption isotherms. The specific retention volumes, V, of 10 organic compounds of different chemical nature and polarity (nonpolar, donor, or acceptor) were determined in the temperature range 333–413 K. The weight fraction activity coefficients of test sorbates, , and Flory–Huggins interaction parameters, , were calculated and discussed in terms of interactions of sorbates with PGME and PGME‐en. Also, the partial molar free energy, , partial molar heat of mixing, , sorption molar free energy, ΔG, sorption enthalpy ΔH, and sorption entropy, ΔS, were calculated. Glass transitions in PGME and PGME‐en, determined from IGC data, were observed in the temperature range 373–393 K and 363–373 K, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2524–2533, 2005     

A convergent synthesis of octadeca-2E, 13Z-dienyl acetate, a pheromone component ofSynanthedon tipuliformis C.

A convergent synthesis of octadeca-2E, 13Z-dienyl acetate, a pheromone component ofSynanthedon tipuliformis C., has been developed. The synthesis is based on cross-coupling of 8-iodooct-2E-en-I-ol THP ether with dec-5Z-enyl bromide catalyzed by CuBr. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1529–1531, August, 1997.     

Preparation and structural characterization of a hexanuclear molybdenum (II) cluster containing carboxylate ligands (Bu4N)2[Mo6(μ3-Cl)8(O2CMe)6]

The hexamolybdenum cluster complex [Mo₆(₃-Cl)₈(O₂CMe)₆]^2–, 1 was isolated as the Bu₄N⁺ salt in 71% yield from the reaction of (Bu₄N)₂[Mo₆(₃-Cl)₈Cl₆] with AgO₂CMe in CH₂Cl₂ solvent. The compound was characterized by single crystal X-ray diffraction analysis. The cluster contains an octahedral arrangement of six molybdenum atoms with eight chloride ligands bridging the eight trianglar faces and six carboxylate ligands terminally coordinated through one oxygen atom to each of the six molybdenum atoms. Crystal data: space group =P2₁/n,a=10.713(3)Å,b=14.43(1)Å,c=21.919(4)Å, =94.37(2)°,Z=2, 1965 reflections,R=0.036.     

Effect of initiators on grafting in the initial stage of the emulsion polymerization of methyl methacrylate using poly(vinyl alcohol) as a protective colloid

 To make clear the reason of unsuitability of poly(vinyl alcohol) (PVA) protective colloid for the emulsion polymerization of conjugated monomers, a model experiment of emulsion polymerization of methyl methacrylate (MMA) was carried out with ammonium persulfate (APS) or azobis(isobutyronitrile) (AIBN) initiators, where a small amount of MMA (1/100th of the concentration compared with ordinary emulsion polymerization) was employed. This corresponds to the initial stage of the emulsion polymerization. Grafting of MMA onto PVA took place remarkably irrespective of the kind of the initiators. Formation of homo-poly(MMA) was observed to a small extent. The formation of new emulsion particles smaller than 100 nm continued to increase to almost the end of the polymerization. PVA molecules in the grafted polymer are supposed to act as stabilizers of newly formed particles. From kinetic treatment using the experimental data, the important issues were derived as follows. Firstly, the sulfate anion radical from APS is much more reactive than the isobutyronitrile radical from AIBN in terms of hydrogen abstraction from PVA. Secondly, high grafting ability of the latter initiator system, notwithstanding the much lower reactivity in the hydrogen abstraction compared with the APS system, is attributed to the relative reactivity of the primary radicals, i.e., hydrogen abstraction reaction from PVA to initiation reaction with MMA. The much slower rate of addition of the isobutyronitrile radical to the monomer compared with that of hydrogen abstraction from PVA facilitates the grafting, although the rate constant of hydrogen abstraction is far smaller than that with the sulfate anion radical by 10⁻⁴ times. Received: 26 April 2001 Accepted: 6 September 2001