Determination of Copper by Adsorptive Stripping Voltammetry in the Presence of Calcein Blue

An electrochemical adsorptive stripping approach is presented for the trace measurement of copper in some real samples. The method is based on the reduction of Cu²⁺ at pH 5.5 calcein blue (CB) containing solution at ?250 mV (vs. Ag/AgCl), adsorption of Cu? CB complex on hanging mercury drop electrode (HMDE) and the voltammetric determination by further reduction to Cu⁺ at HMDE. Experimental optimum conditions were determined in the fundamental studies. At the experimental optimum conditions the adsorbed complex of Cu²⁺ and calcein blue gives a well defined cathodic stripping peak current at ?0.135 V, which has been used for the determination of copper in the concentration range of 0.02 to 15 ng/mL with accumulation time of 90 s. The relative standard deviation (RSD) for the determination of 0.5 and 6.0 ng mL^?1 were 2.60 and 1.94% respectively. (n=10). The method has been applied to the analysis of copper in analytical reagent grade salts and tap water, mineral water and drug samples with satisfactory results.     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

Sequential injection method for the direct spectrophotometric determination of bismuth in pharmaceutical products

A spectrophotometric method is reported for the determination of bismuth in pharmaceutical products using sequential injection analysis. Methylthymol blue (MTB) was used as a color forming reagent and the absorbance of the Bi(III)-MTB complex was monitored at 548 nm. The various chemical and physical variables that affected the reaction were studied. A linear calibration graph was obtained in the range 0.0-75.0 mg l⁻¹ Bi(III) at a sampling frequency of 72 h⁻¹. The reagent consumption was considerably reduced compared to conventional flow injection systems, as only 150 μl of MTB were consumed per run. The precision was very satisfactory (s_r=0.5%, at 50.0 mg l⁻¹ Bi(III), n=12) and the limit of detection, c_L, was 0.250 mg l⁻¹. The developed method was applied successfully to the analysis of various pharmaceutical products containing Bi(III). The relative errors e_r, were <1.5% in all cases and were evaluated by comparison of the obtained results with those found using atomic absorption spectrometry as the reference method.     

Spectrophotometric and derivative spectrophotometric determination of nickel with hydroxynaphthol blue

The reaction of nickel(II) cation with hydroxynaphthol blue (HNB) in aqueous media at pH 5.2–6.0 results in a red complex that is stable for at least 2h. Beer's Law is obeyed up to 3.2 g/ml of nickel(II) with an apparent molar absorptivity of 1.38 × 10⁴l/mol/cm at 563 nm. This paper proposes procedures for nickel determination by ordinary and first-derivative spectrophotometry. The results demonstrate that the linear dynamic range is 0.08–3.20 g/ml with a limit of detection of 23 ng/ml for ordinary spectrophotometry, compared with 21–800 ng/ml and 6 ng/ml, respectively, for first-derivative spectrophotometry. Calcium(II), magnesium(II), barium(II), strontium(II), cadmium(II), lead(II), manganese(II), bismuth(III) and molybdenum(VI) ions do not interfere for at least 1001 mass ratios. The main interferents are cobalt(II), titanium(IV), aluminium(III), mercury(II) and copper(II). The interferences of titanium(IV), aluminium(III), zirconium(IV) and iron(III) can be masked by fluoride and mercury(II) and copper(II) with thiosulfate or thiourea. The derivative method is applied to nickel determination in standard brasses and the results demonstrate that there is no significant difference between the results and certified values at the 95% confidence level.     

Kinetic of Patent Blue VF Adsorption from Aqueous Solution on Activated Bone Charcoal

The effect of temperature of activation on bone charcoal, used as adsorbent for the removal of Patent Blue VF from water solutions was studied. The adsorbent was characterized by FTIR, XRD, SEM and EDS. The kinetic of adsorption of dye was carried out at 10 °C and 45 °C. Carbonization temperature (600–1000 °C) of the adsorbent has significant effect on the removal of dye from water solutions. The first order kinetic, Elovich, Bangham, parabolic diffusion and power function equations were found to fit the kinetic data. Activation energies of adsorption (Δ≠) have higher values for the charcoal activated at high temperatures and the other thermodynamic parameters like ΔH≠, ΔS≠ and ΔG≠ were also found.     

几种表面活性剂与DNA的相互作用

用循环伏安、紫外－可见光谱和交流阻抗等方法，以电活性小分子亚甲基蓝（ MB）为探针，研究了几种表面活性剂与DNA的相互作用。研究发现，阴离子、阳离 子和非离子表面活性剂均可通过疏水和静电作用与固定在电极表面的DNA分子结合 ，改变电极表面DNA的状态，进而影响电活性小分子的电化学行为。阴离子表面活 性剂与DNA之间以静电排斥为主，也有部分疏水性结合，它使MB的氧化还原峰峰电 流减小。阳离子表面活性剂十六烷基三甲基溴化铵、十二烷基三甲基氯化铵均在一 定浓度范围内对MB的电化学响应有增敏作用，而代十六烷基吡啶、溴代十八烷基吡 啶表现出抑制效应，它们与DNA间既有疏水性作用，也有静电吸引。非离子表面活 性剂与DNA的结合较弱，其主要是通过改变溶液的性质（如粘度、极性和介电常数 等）影响DNA的构象，从而导致MB电化学参数的微弱变化。此外，表面活性剂疏水 链的长短及极性头基的大小对作用过程也有一定影响。     

Synthesis of regio- and stereoselective alkoxy-substituted spirobifluorene derivatives for blue light emitting materials

Three new octyloxy substituted spirobifluorenes, 2,7-diphenyl-3′,6′-bis(octyloxy)-9,9′-spirobifluorene (DPBSBF, 1a), 2,7-dibiphenyl-3′,6′-bis(octyloxy)-9,9′-spirobifluorene (DBBSBF, 1b) and 2,7-diterphenyl-3′,6′-bis(octyloxy)-9,9′-spirobifluorene (DTBSBF, 1c) were prepared. All the compounds had been fully characterized by ¹H and ¹³C NMR, UV-Vis, DSC, mass spectrometry and gave satisfactory elemental analyses. They possessed good solubility in common organic solvents and good homogeneous film formation. The optical energy band gap of DBBSBF was 3.27 eV between the HOMO energy level, 5.85 eV, measured by UPS and the LUMO, 2.58 eV, calculated from absorption spectrum. A blue organic light emitting diode (OLED) based on the structure of ITO/TPD (60 nm)/DBBSBF (40 nm)/Alq₃ (20 nm)/LiF (1 nm)/Al (100 nm) showed good performance. The luminance of 3125 cd/m² was observed at a drive voltage of 12.8 V and the colour coordinate in CIE chromaticity was (0.14, 0.12). The external quantum efficiency was obtained to be 2.8% at 100 cd/m².     

Polyaniline／Prussian Blue Composite Film Electrochemical Biosensors for Cholesterol Detection

ＩｎｔｒｏｄｕｃｔｉｏｎＣｈｏｌｅｓｔｅｒｏｌｉｓａｖｅｒｙｉｍｐｏｒｔａｎｔｂｉｏａｃｔｉｖｅｃｏｍｐｏｕｎｄ .Ｎｕｍｅｒｏｕｓａｔｔｅｍｐｔｓｈａｖｅｂｅｅｎｍａｄｅｔｏｃｒｅａｔｅｓｅｎｓｉｔｉｖｅ ,ｓｅｌｅｃｔｉｖｅ ,ｒｅｌｉａｂｌｅａｎｄｌｏｗｃｏｓｔｃｈｏｌｅｓｔｅｒｏｌｓｅｎｓｏｒｓｄｕｒｉｎｇｔｈｅｌａｓｔｄｅｃａｄｅｂｅｃａｕｓｅｏｆｔｈｅｓｉｇｎｉｆｉｃａｎｃｅｉｎｃｌｉｎｉｃａｌｄｉ ａｇｎｏｓｉｓｏｆｃｏｒｏｎａｒｙｈｅａｒｔｄｉｓｅａｓｅｓ ,ａｒｔｅｒｉｏｓｃｌｅｒｏｓ…     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

Square‐Wave Voltammetry Applied to the Analysis of the Dye Marker,Solvent Blue 14, in Kerosene and Fuel Alcohol

The purpose of this paper is to develop an electroanalytical method based on square‐wave voltammetry (SWV) for the determination of the solvent blue 14 (SB‐14) in fuel samples. The electrochemical reduction of SB‐14 at glassy carbon electrode in a mixture of Britton‐Robinson buffer with N,N‐dimethylformamide (1 : 1, v/v) presented a well‐defined peak at?0.40 V vs. Ag/AgCl. All parameters of the SWV technique were optimized and the electroanalytical method presented a linear response from 1.0×10^?6 to 6.0×10^?6 mol L^?1 (r=0.998) with a detection limit of 2.90×10^?7 mol L^?1. The developed method was successfully utilized in the quantification of the dye SB‐14 in kerosene and alcohol samples with average recovery from 93.00 to 98.10%.