Observation of self-ion-molecule reactions during collisionally activated dissociation in an ion-trap mass spectrometer

This paper describes the formation of protonated molecules ([M + H]+) and adduct ions by self-ion-molecule reactions (SIMR) during collisionally activated decomposition (CAD) of methyne addition ions ([M + CH]+) produced from chemical ionization (CI) or SIMR in both an external and internal source ion-trap mass spectrometer (ITMS). The CAD results for the methyne addition ions of dopamine produced from both SIMR and dimethyl ether CI undertaken in the external and internal source ITMS were compared in order to prove the occurrence of SIMR during CAD processes. Compared with the external source ITMS, the internal source ITMS is much more easily applicable to this type of reaction owing to the large population of neutral analytes present in the trap.     

Energy transfer rates and impact sensitivities of two classes nitramine explosives molecules

Some explosives are stable molecules with large energy barriers to chemical reaction, and in shock or impact initiation, a sizable amount of phonon energy must be converted to the molecular internal higher vibrations by multiphonon up pumping. To investigate the relationship between impact sensitivities and energy transfer rates, the number of doorway modes of explosive molecules is estimated by a simple theory in which the rate is proportional to the number of normal mode vibrations. We evaluated frequencies of normal mode vibrations of 13 explosive molecules which are CHNO nitramine-contained and have not been analyzed previously. The number of doorway modes in the regions of 200–700 cm⁻¹ was evaluated by the direct counting method. For more clear investigation of the relationship we have classified these 13 nitramine explosive molecules, by the number of nitramine group they contained, into two groups. There are eight molecules that contained one nitramine group and five molecules that contained poly-nitramine groups. It is found that the number of doorway modes shows a linearly correlation to the impact sensitivities derived from drop hammer tests. This result is in agreement with that of several previous works. Besides, it is also noted in our study that in those nitramine explosives molecules with similar molecular structure (similar number nitramine group they contained) and similar molecular weight, the correlation between the sensitivity and the number of doorway modes is higher. We found that the vibrational frequency of ω corresponds to nitro group motions of every molecule is contributed to the number of doorway modes in the regions of 200–700 cm⁻¹.     

Organoelement Compounds with Al?Al,Ga?Ga,and In?In Bonds

In the attempt to synthesize compounds with aluminum in a low oxidation state and an Al Al bond, by the reduction of alkylaluminum halides with alkali metals, analogous to a Wurtz coupling, in general the deposition of elemental aluminum and the formation of the corresponding trialkylaluminum compounds is observed. Thus, tetrasubstituted dialuminum compounds R₂Al AlR₂, apart from a few poorly characterized examples, were for a long time considered part of an unverified class of substances. Only with the sterically very highly shielded tetrakis[bis(trimethylsilyl)methyl]dialuminum did we achieve the synthesis of the first completely characterized organoelement compound with unlimited stability, which shows aluminum in the oxidation state + II and has an Al Al bond. In the meantime, corresponding compounds for the elements gallium and indium have been obtained. With the simple access to tetrasubstituted dimetal compounds, a fascinating new research area has opened for preparative chemistry, in which the particular interest will naturally lie in the reactive properties of the metal-metal bond.     

Probing in vitro digestion at oil–water interfaces

Interfacial layers have been widely applied to study the formation and stability of emulsion-based systems. However, the application of isolated interfaces to address digestibility of emulsions is often limited because of the complexity of experimental methods and results. This review summarizes the latest developments in analytical methods and literature data on effects of digestion on interfacial layers. Particular emphasis is given to understand the changes on interfacial magnitudes during oral, gastric, and duodenal digestion, either applied separately or sequentially. Limitations of interfacial aspects and key factors that influence emulsion microstructure in bulk and lipid digestion are identified. Understanding the behavior of interfacial layers upon gastrointestinal digestion promotes an accurate tracking of the physiological fate of emulsions.     

Fermentation characteristics and the dynamic trend of chemical components during fermentation of Massa Medicata Fermentata

As a representative of traditionally fermented Chinese medicine, Massa Medicata Fermentata (MMF) shows the functions of invigorating the spleen and stomach and promoting digestion, which plays an important role in the treatment of gastrointestinal diseases. The fermentation mechanism and the key factors that affect the quality of MMF have not been revealed yet, which has become an urgent issue that limits its clinical application. This article aims to systematically and comprehensively reveal the transformation of physical properties and the dynamic trend of chemical components including substrate components, volatile components, and lactic acid as anaerobic fermentation product during MMF fermentation. Along with obvious hyphae growth observed for MMF, the weight of MMF decreased, and the moisture and temperature increased. Through the quantified 14 components from substrate, ferulic acid increased from 45.53 ± 6.94 to 141.89 ± 78.40 μg/g, while glycosides and phenolic acids declined except caffeic acid. Also, within the 66 volatile components analyzed, alcohols and acids increased, while aldehydes and ketones decreased. Lactic acid was not detected in the fermentation substrate, but an apparent increase in lactic acid content was observed along with the increased fermentation days, resulting in 2.54 ± 0.15 mg/g on day 8. Based on the tested components, the fermentation process of MMF was discriminated into three distinct stages by principal component analysis, and an optimal fermentation time of four days was proposed. The results of this study will be of great significance to clarify the characteristics of fermentation and conduce to improving quality standards of MMF.     

旋转输液管动力稳定性理论分析北大核心CSCD

基于Lagrange原理和假设模态法建立了旋转输液管的动力学模型.通过降阶升维的方法求解系统的特征值问题,并分析了旋转输液管自由振动特性.得到了不同端部集中质量和转速下,系统特征值随流速升高的演变轨迹.揭示了临界流速随系统参数的变化规律.研究发现,内部流体的流动对旋转输液管动力学特性存在显著影响.在某些参数组合下,系统低阶模态能够形成不同形式的内共振关系.预示了旋转输液管模型蕴含丰富的动力学现象.     

Effects of Cone Angles on Nonlinear Vibration Responses of Functionally Graded Shells北大核心CSCD

The nonlinear vibration responses of functionally graded materials (FGMs) shells with different cone angles under external loads were studied. Firstly, the Voigt model was employed to describe the physical properties along the thickness direction of FGMs conical shells. Then, the motion equations were derived based on the 1st-order shear deformation theory, the von Kármán geometric nonlinearity and Hamilton’s principle. Next, the Galerkin method was applied to discretize the motion equations and the governing equations were simplified into a 1DOF nonlinear vibration differential equation under Volmir’s assumption. Finally, the nonlinear motion equations were solved with the harmonic balance method and the Runge-Kutta method, and the amplitude frequency response characteristic curves of the FGMs conical shells were obtained. The effects of different material distribution functions and different ceramic volume fraction exponents on the amplitude frequency response curves of conical shells were discussed. The bifurcation diagrams of conical shells with different cone angles, as well as time process diagrams and phase diagrams for different excitation amplitudes, were described. The motion characteristics were characterized by Poincaré maps. The results show that, the FGMs conical shells present the nonlinear characteristics of hardening springs. The chaotic motions of the FGMs conical shells are restrained and not prone to motion instability with the increase of the cone angle. The FGMs conical shell present a process from the periodic motion to the multi-periodic motion and then to chaos with the increase of the excitation amplitude. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

Qualitative properties of pulsating fronts for reaction–advection–diffusion equations in periodic excitable media

In this paper, we study the pulsating fronts of reaction–advection-diffusion equations with two types of nonlinear term in periodic excitable media. Firstly, for the case with combustion nonlinearity, the unique front is proved to decay exponentially when it approaches the unstable limiting state. Secondly, for the degenerate monostable type nonlinearity, it is shown that the front with critical speed is unique, monotone and decays exponentially at negative end, while the fronts of noncritical speeds decay to zero non-exponentially.     

Asymptotic stability of the Degasperis–Procesi antipeakon–peakon profile

The aim of this paper is to prove that the Degasperis–Procesi antipeakon–peakon profile is asymptotically stable for all time. We start by proving the asymptotic stability of a single Degasperis–Procesi peakon and antipeakon with respect to perturbations having a momentum density that is first negative and then positive. Then this result is extended towards a well-ordered trains of antipeakons–peakons under such perturbations. In particular, the asymptotic stability of the antipeakon–peakon profile holds.     

Minimax principles for elliptic mixed hemivariational–variational inequalities

In this paper, minimax principles are explored for elliptic mixed hemivariational–variational inequalities. Under certain conditions, a saddle-point formulation is shown to be equivalent to a mixed hemivariational–variational inequality. While the minimax principle is of independent interest, it is employed in this paper to provide an elementary proof of the solution existence of the mixed hemivariational–variational inequality. Theoretical results are illustrated in the applications of two contact problems.