Retention of ionizable compounds on HPLC. Modelling retention for neutral and ionizable compounds by linear solvation energy relationships

Summary A global LSER model that relates HPLC retention to mobile phase composition and pH is tested for a varied group of solutes, both neutral and ionizable, in a polymeric column and methanol-water mobile phases. It is compared to the local LSER model developed only for a given mobile phase, i.e., a fixed organic modifier content, and to the global LSER model set only for neutral solutes. The global LSER model for neutral and ionizable solutes requires a few supplementary parameters over the other models tested, but it accounts for retention under any experimental conditions for a given column and methanol-water mobile phases, describing properly the interactions established in the HPLC system (hydrophobicity, hydrogen-bond acidity and basicity, dipolarity/polarizability…). This paper is number 13 of a series with the same general title: “Retention of Ionizable Compounds on HPLC” published in various journals.     

The preparation of immobilized polysiloxane coated on packings materials for high-pressure gas chromatography

Summary In high pressure gas chromatography efficient columns can be packed by the slurry packing technique. However, polysiloxane stationary phases like OV 101 and OV 3 dissolve in the packing liquids. In order to make them suitable for slurry packing these stationary phases have to be made insoluble. This immobilization is achieved by bonding the stationary phases to the surface by means of a high temperature treatment. Successive layers are applied by recoating and are immobilized by a cross-link reaction. A range of loading percentages from 4 upto 20 by weight could be prepared in this way. On the evaluated columns compounds like butanol and dioxane elute as rather symmetrical peaks with the correct values for the retention index, indicating the absence of adsorption effects. Efficiency is good and bleeding rate is low. The columns could be successfully used in the analysis of turpentines.     

On the mechanism of solute retention in RP-HPLC systems with B+AB1+AB2 type eluents

Summary Intermolecular interactions between the solute and the moieties constituting the mobile phase significantly contribute to the overall retention pattern of a given solute in a given chromatographic system. In this paper retention of solute is discussed in the case of the B+AB₁+AB₂ type mobile phase, which, in a quasithermodynamic way, can be divided into seven individual moieties. One evaluates the influence of each moiety on solute retention, and refers these regularities to the polarity of the solutes.     

Compehensive two-dimensional gas chromatography (GC×GC) and its applicability to the characterization of complex (petrochemical) mixtures

In general, petrochemical products contain only a limited number of chemical classes of compounds (sample dimensionality). The enormous number of individual components within these classes, however, soon puts limitations upon a single chromatographic technique when it comes to adequate characterization of these products. Comprehensive two-dimensional gas chromatography (GC×GC) clearly opens the possibility of estimating the composition of hydrocarbon mixtures in a far more detailed fashion than hitherto possible. Although the emphasis of papers of GCxGC thus far almost exclusively applies to the unsurpassed peak-capacity, in the oil industry there is a need for characterization, rather than for analyzing all the individual compounds. In principle a GCxGC system can provide an almost perfect match between its intrinsic properties and the dimensionality of oil samples. To establish the applicability of GCxGC towards petrochemical analytical challenges, a commercially aavailable prototype instrument was subjected to an exhaustive characterization of a typical hydrocarbon precess stream and a fast characterization of a light gas oil. Although there are no fundamental limitations towards the quantitative aspects of a GCxGC system, this paper confines itself to qualitative results only. Quantitative aspects of GCxGC will be published in a forthcoming paper.     

A novel support with artificially created recognition for the selective removal of proteins and for affinity chromatography

Summary Acrylamide and N,N-methylenebisacrylamide were copolymerized in the presence of a protein to form a gel which was pressed through a sieve. The gel particles obtained were packed into a chromatographic tube. The experimental conditions for the polymerization are such that the pores of the gel particles are large enough to permit the protein to diffuse out of the particles, so that the entrapped protein can be removed from the bed by washing with an aqueous solution. However the interaction with the matrix is so strong that the protein can be desorbed only by a buffer containing 0.5 M sodium chloride or by a 10% solution of acetic acid containing 10% SDS. When a sample containing the protein present during the polymerization was applied to the column along with other proteins this protein was the only one adsorbed. The technique worked selectively with hemoglobin, cytochrome C and transferrin.     

LC-ESI-MS Determination of Bilobalide and Ginkgolides in Canine Plasma

A sensitive and selective method using liquid chromatography with electrospray ionization mass spectrometric detection was developed for the quantification of bilobalide and ginkgolides in canine plasma. The analytes were extracted with diethyl ether-dichloromethane-isopropanol (6:3:1, v/v) after spiking the samples with daidzein (internal standard). The lower limit of quantification (LLOQ) of the method was 2.5 μg L⁻¹ for ginkgolide B and 10.0 μg L⁻¹ for bilabolide, ginkgolide A and ginkgolide C. The accuracy of the method was within 15% of the actual values over a wide range of plasma concentrations. The intra-day and inter-day precision was better than 15% (R.S.D.). Finally, the LC-ESI-MS method was successfully applied to study the pharmacokinetics of ginkgolides and bilabolide after administration of Ginkgo biloba extracts to dogs.     

Deactivation,coating and performance of nickel capillary columns for GLC

Electroformed nickel tubing was deactivated by chemical vapor deposition of silicon from silane gas and subsequent treatment with cyclooctamethyltetrasiloxane (D4). Standard activity tests performed on the uncoated tube and also on columns coated with crosslinked and uncrosslinked, nonpolar stationary phase, show that good quality flexible columns can be prepared from nickel tubing. The inner surface of the silicon coated tube was characterized by Auger depth profile analysis.     

Separation of mixtures of permanent gases and light hydrocarbons on spherical carbon molecular sieves by gas-solid chromatography

Summary Experimental results are presented on the application of Carbosieve S (Supelco) and Spherocarb (Analabs) spherical carbon molecular sieves for the gas chromatographic separation of mixtures of permanent gases and C₁–C₃ hydrocarbons using a single column or two columns in series. At a programmed temperature of 35–300°C, good separation of the sample components was obtained when using helium as the carrier gas. When hydrogen was used as the carrier gas and the analysis was carried out under isothermal conditions the elution sequence of oxygen and nitrogen reversed as the temperature was increased. This behaviour was observed within a temperature range of 35–225°C for Carbosieve S, and within a temperature range of 35–300°C for Spherocarb.     

Optimization of alkali-alkalkine earth cation separation on weak cation-exchangers

Summary The elution behavior of alkali and earth alkaline cations has been studied on a newly synthesized weak cationexchanger (WCX). Applying this stationary phase isocratic separation of these cations is possible. The dependence of retention on competing ion concentration is described via a simple model. The influence of crown ethers as well as organic eluent additives on selectivity and peak efficiency is demonstrated. With optimized separation such cations can be determined with detection limits of about 0.5 ppm using a conductivity detector without ion suppression.