Computerized optimization of gradient elution conditions with ternary solvent mobile phases in RPLC

Summary In this work, an optimization procedure for gradient RPLC separation, using ternary mobile phases, is described. This procedure requires eight preliminary experiments in gradient elution mode to predict the retention surface for each solute over the whole triangular space. This is followed by computerized calculations to determine the best ternary gradient elution profile with respect to both selectivity and analysis time. The efficiency of this procedure from the point of view of rapidity and of accuracy, is illustrated for the specific separation of twelve phenyl urea herbicides.     

Synthesis,Structure, and Fluxionality of Strained Hypercoordinate Silicon‐Bridged [1]Ferrocenophanes

The first hypercoordinate sila[1]ferrocenophanes [fcSiMe(2‐C₆H₄CH₂NMe₂)] ( 5 a ) and [fcSi(CH₂Cl)(2‐C₆H₄CH₂NMe₂)] ( 5 b ) (fc=(η⁵‐C₅H₄)Fe(η⁵‐C₅H₄)) were synthesized by low‐temperature (?78 °C) reactions of Li[2‐C₆H₄CH₂NMe₂] with the appropriate chlorinated sila[1]ferrocenophanes ([fcSiMeCl] ( 1 a ) and [fcSi(CH₂Cl)Cl] ( 1 d ), respectively). Single‐crystal Xray diffraction studies revealed pseudo‐trigonal bipyramidal structures for both 5 a and 5 b , with one of the shortest reported Si???N distances for an sp³‐hybridized nitrogen atom interacting with a tetraorganosilane detected for 5 a (2.776(2) Å). Elongated Si? C_ipso bonds trans to the donating NMe₂ arms (1.919(2) and 1.909(2) Å for 5 a and 5 b , respectively) were observed relative to both the non‐trans bonds ( 5 a : 1.891(2); 5 b : 1.879(2) Å) and the Si? C_ipso bonds of the non‐hypercoordinate analogues ([fcSiMePh] ( 1 b ): 1.879(4), 1.880(4) Å; [fcSi(CH₂Cl)Ph] ( 1 e ): 1.881(2), 1.884(2)). Solution‐state fluxionality of 5 a and 5 b , suggestive of reversible coordination of the NMe₂ group to silicon, was demonstrated by means of variable‐temperature NMR studies. The ΔG^≠ of the fluxional processes for 5 a and 5 b in CD₂Cl₂ were estimated to be 35.0 and 37.6 kJ mol^?1, respectively (35.8 and 38.3 kJ mol^?1 in [D₈]toluene). The quaternization of 5 a and 5 b by MeOTf, to give [fcSiMe(2‐C₆H₄CH₂NMe₃)][OTf] ( 7 a‐ OTf) and [fcSi(CH₂Cl)(2‐C₆H₄CH₂NMe₃)][OTf] ( 7 b‐ OTf), respectively, supported the reversibility of NMe₂ coordination at the silicon center as the source of fluxionality for 5 a and 5 b . Surprisingly, low room‐temperature stability was detected for 5 b due to its tendency to intramolecularly cyclize and form the spirocyclic [fcSi(cyclo‐CH₂NMe₂CH₂C₆H₄)]Cl ( 9 ‐Cl). This process was observed in both solution and the solid state, and isolation and Xray characterization of 9 ‐Cl was achieved. The model compound, [Fc₂Si(2‐C₆H₄CH₂NMe₂)₂] ( 8 ), synthesized through reaction of [Fc₂SiCl₂] with two equivalents of Li[2‐C₆H₄CH₂NMe₂] at ?78 °C, showed a lack of hypercoordination in both the solid state and in solution (down to ?80 °C). This suggests that either the reduced steric hindrance around Si or the unique electronics of the strained sila[1]ferrocenophanes is necessary for hypercoordination to occur.     

Non-solvated aluminum hydride. Crystallization from diethyl ether-benzene solutions

Crystallization of non-solvated aluminum hydride from a diethyl ether-benzene mixed solvent was studied. The desolvation of AlH₃·(Et₂O)_x etherate in solution and the crystallization of α-AlH₃ during polythermal heating of the solution occur only in the presence of ≥10 wt.% LiAlH₄. The process is multistage, and the crystallization begins with the formation of the AlH₃·0.25Et₂O solvate, which recrystallizes in the solid phase into γ-AlH₃ and then α-AlH₃. Four crystalline modifications of aluminum hydride were characterized by X-ray diffraction and electron microscopy. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1259–1265, July, 2007.     

改性环糊精气相色谱手性固定相拆分对映体的选择性及拆分机理的讨论

改性环糊精气相色谱手性固定相拆分对映体的选择性及拆分机理的讨论周昕，万宏，欧庆瑜（中国科学院兰州化学物理研究所兰州７３００００）１前言自１９８８年Ｋｏｎｉｇ￣［１］等人成功地将改性环糊精用于毛细管气相色谱固定相拆分对映体以来，环糊精衍生物以其高选择性...     

Investigation of the effect of epoxide structure on the initiation efficiency in isobutylene polymerizations initiated by epoxide/TiCl4 systems

The effect of the chemical structure of styrene-based epoxides, namely, styrene epoxide (SE), α-methylstyrene epoxide (MSE), p-methylstyrene epoxide (pM-SE) and α-methyl-p-methylstyrene epoxide (pM-MSE), in conjunction with TiCl₄, on the initiation efficiency (I_eff) in the carbocationic polymerization of isobutylene (IB) was investigated. SE yielded living polymerization, but the initiation efficiency was low when compared to MSE (I_eff=8% and 35%, respectively). pM-SE led to non-living IB polymerization, while pM-MSE revealed linear M_n-conversion plot and narrow MWD with a non-linear first order rate plot. Among the epoxides investigated, MSE was the best initiator to scale up the one-step synthesis of polyisobutylenes (PIBs) carrying one primary hydroxyl head group and one tertiary chloride end group. The hydroxyl functionality of these PIBs determined by ¹H-NMR was F_n=1.09±0.16 from 24 experiments.     

Atom transfer radical polymerization of 1-phenoxycarbonyl ethyl methacrylate monomer

Atom transfer radical polymerization conditions with copper(I) bromide/2,2^′-bipyridine (Cu/2,2^′-bpy) as the catalyst system were employed for the homopolymerization and random copolymerization of 1-phenoxycarbonyl ethyl methacrylate (PCMA) with methyl methacrylate (MMA). Temperature studies indicated that the polymerizations occurred smoothly in bulk at 110 °C. Poly(PCMA)(polydispersity index=1.27) homopolymer was characterized and then used as macroinitiator for increasing its molecular weight. The homopolymerization of PCMA was also carried out under free radical conditions using 2,2^′-azobisisobutyronitrile as an initiator.The monomer and polymers were characterized by FT-IR and ¹H and ¹³C-NMR techniques. The glass transition temperatures, the solubility parameters and average-molecular weights of the polymers were determined. Thermal stabilities of the polymers were given as compared with each other by using TGA curves. Thermal degradation products of poly(PCMA)s obtained by ATRP and free radical polymerization were compared with each other by using ¹H-NMR technique.     

LIGAND EFFECT OF CATALYTIC SYSTEM WCl_6-Et_2Al FOR RING OPENING METATHESIS POLYMERIZATION OF DICYCLOPENTADIENE

INTRODUCTIONInrecentyearsresearchprojectsonROMPofcycloolefinshavebeenattractingattentionofscientistsengagedinthesynthesisanddesignofnewpolyTneric'AprojectsupportedbytheNationalNaturalSCienceFoundationofChina(projectapprovalnumber:29474160).'-Correspondingauthormaterials,amongthemROMPsofnorbornene,norbornenederivativesandDCPDhavefoundgrowingfavourinthechemists,.y.,LI--4].Acrosslinkedpolarer(PDCPD),anewplastic,possessingexcellentmechanicalproperties(highNIS,TSetc)a-ndgoodthermal…     

Synthesis and photopolymerization of monomers bearing isopropenylphenoxy groups

The synthesis of a series of monomers containing isopropenylphenoxy groups was carried out. On irradiation with UV light in the presence of onium salt photoacid generators, these monomers undergo a chain extension reaction consisting of a dimerization followed by a Friedel-Crafts ring closure which results in the formation of polymers with indane groups in the backbone. Aryl imide-containing monomers bearing isopropenylphenoxy groups were also shown to undergo facile photoinduced cationic polymerization. The resulting polymers displayed excellent thermal stability. © 1995 John Wiley & Sons, Inc.     

Molecularly-imprinted polypyrrole-modified stainless steel frits for selective solid phase preconcentration of ochratoxin A

A molecularly-imprinted polymer (MIP) was prepared by electropolymerization of pyrrole (Py) onto a stainless steel frit, using ochratoxin A (OTA) as the template, in order to make a micro solid phase preconcentration (SPP) device. The OTA template was removed with 1% triethylamine (TEA) in methanol. Compared to non-imprinted polypyrrole (PPy), the molecularly-imprinted polypyrrole (MIPPy) enhanced the selective binding of OTA. The percentage recovery improved from 0 to 40% when the OTA sample solution was acidified with 1 M HCl (1% by volume). At a flow rate of 0.2 mL/min, maximum OTA binding was reached in 6 min after a total loading of 3.2 ng OTA. Final elution of the OTA was analyzed by high performance liquid chromatography (HPLC) with fluorescence detection, using 20:80 v/v acetonitrile–ammonia buffer (NH₄Cl/NH₃, 20 mM, pH 9.2) as the mobile phase. The MIPPy-SPP-HPLC results clearly demonstrated that the MIPPy-SPP device afforded selective preconcentration of OTA from red wine samples, at OTA concentration levels as low as 0.05 ppb, prior to HPLC analysis.     

Morphology and thermal properties of a PC/PE blend with reactive compatibilization

Reactive compatibilization of immiscible polymers is becoming increasingly important and hence a representative study of a polycarbonate/high density polyethylene (PC/HDPE) system is the focus of this paper. A grafted copolymer PC‐graft‐ethylene‐co‐acrylic acid (PC‐graft‐EAA) was generated as a compatibilizer in situ during processing operation by ester and acid reaction between PC and ethylene‐acrylic acid (EAA) in the presence of the catalyst dibutyl tin oxide (DBTO). As the polyethylene (PE) matrix does not play any part during the synthesis of the copolymer and since PC and EAA are also immiscible, to simplify the system, the influence of this copolymer formation at the interface between PC and EAA on rheological properties, phase morphology, and crystallization behavior for EAA/PC binary blends was first studied. The equilibrium torque increased with the DBTO content increasing in EAA/PC blends on Haake torque rheometer, indicating the in situ formation of the graft copolymer. Scanning electron microscopy (SEM) studies of cryogenically fractured surfaces showed a significant change at the distribution and dispersion of the dispersed phase in the presence of DBTO, compared with the EAA/PC blend without the catalyst. Differential scanning calorimetry (DSC) studies suggested that the heat of fusion of the EAA phase in PC/EAA blends with or without DBTO reduced with the formation of the copolymer compared with pure EAA. Then morphological studies and crystallization behavior of the uncompatibilized and compatibilized blends of PC/PE were studied as functions of EAA phase concentration and DBTO content. Morphological observations in PC/PE blends also revealed that on increasing the EAA content or adding the catalyst DBTO, the number of microvoids was reduced and the interface was intensive as compared to the uncompatibilized PC/PE blends. Crystallization studies indicated that PE crystallized at its bulk crystallization temperature. The degree of crystallinity of PE phase in PC/PE/EAA blends was also reduced with the addition of EAA and DBTO compared to the uncompatibilized blends of PC/PE, indicating the decrease in the degree of crystallinity was more in the presence of PC‐graft‐EAA. Copyright © 2007 John Wiley & Sons, Ltd.