α，ω-二羧基-甲基丙烯酸丁酯低聚物的合成及MS分析

利用传统自由基聚合法，在四氢呋喃溶液中自由基引发聚合甲基丙烯酸丁酯单体而得到ω-羧基-甲基丙烯酸丁酯低聚物(CTBMA)(分子量在1500左右)；利用CTBMA末端酯基的反应特性，在二氧六环／水／KOH混合溶液中皂化CTBMA，使之转化为α，ω-羧基甲基丙烯酸丁酯低聚物(di-CTBMA)；研究了溶剂的类别、反应时间等反应条件对皂化产物结构的影响；利用MALDI-TOF-MS及LSIMS对皂化各阶段产物进行了分析监测．实验表明，在适当的皂化条件下，CTBMA皂化时主要为末端酯基转化为羧基，相应得到的产物di-CTMBA具有很好的结构特性，其官能团度(functionality)接近2．     

Use of mobile phase 18-crown-6 to improve peak resolution between mono- and divalent metal and amine cations in ion chromatography

It is difficult to quantify NH4+ by ion chromatography in the presence of high concentrations of Na+ due to peak overlap. The Dionex IonPac CS15 column, which contains phosphonate, carboxylate, and 18-crown-6 functional groups, was originally developed to overcome this problem. We have found that the addition of 18-crown-6 to the eluent promotes improved peak resolution between Na+ and NH4+ even at concentrations as high as 60,000 to 1 using this column. Its use also improves the separation of alkali and alkaline earth metal and amine cations. Mobile phase 18-crown-6 increased the retention times of CH3NH3+, NH4+, and K+, and decreased the retention time of Sr2+. The retention times of Li+, Na+, Mg2+, Ca2+, (CH3)2NH2+, and (CH3)3NH+ were not affected. This method makes possible the direct analysis of ammonia from nitrogenase, the enzyme responsible for biological nitrogen fixation. The resolution of the NH4+ peak from the Na+ and Mg2+ peaks improved from zero resolution to values of 6.19 and 5.65, respectively. This technique considerably reduces the analysis time of NH4+ in the presence of high concentrations of Mg2+ and Na+ over traditional indophenol measurements.     

Characterization of the 310-helix in model peptides by HRMAS NMR spectroscopy

A tetra- and a hepta-homopeptide from the C(alpha)-tetrasubstituted Aib (alpha-aminoisobutyric acid) residue were covalently linked to the POEPOP resin by the fragment-condensation approach. The conformational preferences of the two model peptides were determined for the first time on a solid support by means of high-resolution magic angle spinning NMR spectroscopy. The results obtained indicate that the Aib homopeptides adopt a regular 3(10)-helical structure even when they are covalently bound to a polymeric matrix, and thus confirm the remarkable conformational stability of the peptides rich in this amino acid. An ATR-FTIR spectroscopic investigation, performed in parallel, also confirmed that these polymer-bound peptides do indeed adopt a helical conformation. The results of this study open the possibility to exploit the peptide-resin conjugates based on C(alpha)-tetrasubstituted alpha-amino acids as helpful, structurally organized templates in molecular recognition studies or as catalysts in asymmetric synthesis.     

CRYSTAL STRUCTURE AND MORPHOLOGY OF NASCENT SAMPLES OF SYMMETRIC AROMATIC POLYESTERS I.POLY(P-PHENYLENE TEREPHTHALATE)

The morphology and crystal structure of poly(p-phenylene terephthalate) (PPT), prepared by confined thin film melt (CTFMP) and solution (CTFSP) and bulk solution polymerization, were characterized by transmission electron microscopy, electron diffraction and molecular modeling. The unit cell is monoclinic (P21/a space group) with parameters a =7.89, b = 5.49, c =12.65 A α= γ= 90°,β= 100.33°, density = 1.48 g/cm3, the a, b andβ values differing slightly from those reported previously in the literature. A degree of variation in relative intensities of hk0 reflections in, apparently, untilted [001] ED patterns was observed from a given sample, suggesting some variation in molecular packing. ED evidence was found for a second phase, with [001] appearing the same as for phase Ⅱ of the related poly(p-oxybenzoate) (PpOBA)polymer. CTFMP crystals polymerized above 220°C (up to 370°C) and CTFSP crystals polymerized at 300°C consisted of lamellae 100-200 A thick.     

Double-imprinted polymer based on cross-linked poly(vinylimidazole–trimethylolpropane trimethacrylate) in solid phase extraction for determination of lead from wastewater samples by UV–vis spectrophotometry

The monitoring of the heavy metal pollution in wastewater is increasingly becoming a crucial global issue since they tend to accumulate in food chains and can cause many biological abnormalities. In this work, it was developed a novel lead ion-imprinted polymer (IIP) using sodium dodecyl sulphate (SDS) as a second template to be used as adsorbent in solid phase extraction (SPE) for determination of lead from wastewater samples by UV–vis spectrophotometry. The polymer called IIP–SDS was synthesised by a double-imprinting process with lead (template) and SDS (template). IIP–SDS was characterised by infrared spectroscopy Fourier transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. IIP–SDS showed good recovery for lead (around 82.0%), while the IIP (only lead as template) was 72.2% and non-IIP was 44.9%. Thus, the double-imprinting process for the preconcentration of Pb²⁺ proved to be a more adequate methodology than IIP with a single template. The optimised parameters of sample preparation were washing solvent (2.0 mL of tetrahydrofuran), type and volume of eluent (5 mL of 1 mol L^?1 hydrochloric acid), sample amount (30 mL of water spiked with 10.0 µg mL^?1), amount of IIP–SDS (400 mg) and sample pH (pH = 4.5). Linearity ranged from 10 to 125 µg L^?1 with r > 0.992. The limit of detection and quantification were 6.3 and 10 µg L^?1, respectively. The precision (relative standard deviation, %) and accuracy (relative error, %) were lower than 15%. Finally, IIP–SDS may be an alternative and effective adsorbent for SPE procedures in monitoring of wastewater samples.     

Synthesis and characterization of novel functional poly(vinyl alcohol-co-styrene sulfonic acid) copolymers

This paper first time reports the preparation of random anionic copolymers from vinyl acetate (VAc) bearing electro-donating substituent and sodium 4-vinylbenzenesulfonate (SSA) having electro-withdrawing substituent. Copolymers (PVA-co-SSA) of different composition have been successfully prepared by a simple free radical solution polymerization technique. Resulting final copolymer contained neutral hydrophilic as well as ionizable ion exchange sites. Evaluation of spectral data obtained from Fourier transform Infrared spectroscopy, Raman spectroscopy, and ¹H Nuclear magnetic resonance helped in identifying and confirming the chemical structure of copolymers. Characterization of copolymers by gel permeation chromatography revealed high molecular weight with moderate polydispersity index. Analysis of thermal stability and glass transition temperature of copolymers by thermogravimetric analysis and differential scanning calorimetry were found in between corresponding homopolymers. Physicochemical properties of PVA-co-SSA can be beneficial for prospective advanced application in the niche area of smart membrane technology for energy and environment.     

Unsymmetrically substituted ethane as a new and efficient initiator for the polymerization of methyl methacrylate and styrene

In this paper, we present a compound, 2,3-diphenyl butyronitrile (DPBN), which can be used as a new and efficient radical initiator for the polymerization of methyl methacrylate (MMA) and styrene (St). Very different from other compounds as a carbon-carbon initiator, DPBN is an unsymmetrically substituted ethane and works with high initiation reactivity at lower temperatures. This new compound as an initiator exhibits various advantages, such as easy preparation, high initiation reactivity, safe use and storage, and convenient handling.     

Facile synthesis of polyacrylate directed silver nanoparticles for pH sensing through naked eye

Poly(acrylic acid) (PAA) and its salt poly(acrylate) (PA) have been synthesized through modified free radical polymerization in environmentally begin aqueous medium under ultrasound to make the process robust. The synthesized polymer is well-characterized through conventional techniques. Its salt is employed to produce highly stable and stimuli sensitive colloidal silver (Ag-PA sol) without using any additional reducing chemical reagents like sodium borohydride, ascorbic acid, hydrazine, etc or UV/Gamma radiation. A detailed mechanistic path of the polymerization and reduction of Ag⁺ on polyacrylate chains has been evaluated. Finally Ag-PA sol is used for pH sensing through naked eye to eliminate the need for sophisticated instrument for data collection. The present work focuses mainly the development of a low cost pH sensing system based on colorimetric ‘smart polymer’ having high practical utility. The unique structural and photo-physical features of nano-scaled materials open new opportunities for the applications of colorimetric pH sensor. In the present work, Ag nano-clusters capped by PA^? are employed as an effective colorimetric pH sensor for the first time, requiring no further functionalization.     

Patterning catalyst via inkjet printing to grow single-walled carbon nanotubes

We demonstrated a method to pattern catalyst via inkjet printing to grow SWNTs, using metal salt solutions as the inks and an ordinary office-use printer. We printed water solutions of cobalt acetate on hydrophilic Si substrates and grew high quality SWNT films.