Li+掺杂对Y2SiO5:Pr3+上转换发光性能影响

采用溶胶-凝胶法制备Li+掺杂改性的Y2SiO5:Pr3+上转换发光材料,考察了Li+掺杂对样品晶型及发光性能的影响。采用XRD,DSC-TGA,FS对所制备的材料进行表征,结果表明Li+掺入浓度在7%～8%(摩尔分数)之间会引起Y2SiO5晶体类型由X1型转变为X2型,且Li+掺入后样品转晶型温度由950℃降至800℃;样品经800℃煅烧处理后以X1型Y2SiO5为主相,850℃煅烧处理后以X2型Y2SiO5为主相;Li+掺入同时会提高Y2SiO5:Pr3+材料的上转换发光强度,Li+最佳掺杂浓度为10%,对于双掺杂Pr3+,Li+:Y2SiO5体系中Pr3+最佳掺杂浓度为1.2%。     

表面接枝含氟苯乙烯共聚物的聚酯薄膜制备与表征

利用表面引发原子转移自由基聚合(SI-ATRP)在聚对苯二甲酸乙二醇酯(PET)薄膜表面接枝苯乙烯和4-氟苯乙烯的共聚物.研究不同反应时间和不同配比下接枝共聚物对聚酯薄膜表面组成、结构和性能的影响.通过傅利叶变换红外光谱仪(ATR/FTIR),X-射线光电子能谱仪(XPS),凝胶渗透色谱(GPC)和扫描电子显微镜(SEM)对接枝改性前后PET薄膜的表面组成,结构和形貌进行分析;利用接触角测试和表面能计算对比研究接枝改性前后PET薄膜的表面性能.结果表明反应时间和单体百分含量对接枝百分率及接触角有一定的影响,随着反应时间的增长,聚酯薄膜表面接枝百分率增大,接触角增加,表面自由能下降.     

氮氧化硅反相色谱固定相材料的制备及色谱分离性能评价

硅胶是目前高效液相色谱(HPLC)固定相中应用最为广泛的基质材料,其流动相的最佳使用范围为pH 2～8。在高pH(pH＞8)的流动相条件下,流动相中的氢氧根会进攻硅胶基质表面残余的硅醇基,导致硅胶基质固定相骨架溶解。在前期的研究中,我们将高温氨气处理多孔硅胶微球得到的氮氧化硅材料用作HPLC固定相,氮氧化硅在高pH流动相条件下表现出了较硅胶更高的稳定性。本文利用元素分析对氮氧化硅材料的氮化程度及含氮量进行系统的表征,并考察了氮氧化硅材料在不同pH条件下的静态稳定性。利用十八烷基二甲基氯硅烷试剂对氮氧化硅材料表面进行疏水性修饰,并以元素分析和核磁共振波谱对表面键合氮氧化硅材料进行了表征。考察了不同碳链的烷基苯、酸性化合物、碱性化合物在疏水改性的C₁₈氮氧化硅反相色谱固定相上的色谱分离性能。进一步分别以酸、碱和中性化合物为分析对象,比较了C₁₈-SiON1050(10)与C₁₈-SiO₂色谱保留的差异。     

固相萃取-超高效液相色谱-电喷雾串联质谱法同时检测尿样中的麻黄碱和N-甲基麻黄碱

建立了固相萃取-超高效液相色谱-电喷雾串联质谱(SPE-UPLC-ESI MS/MS)联用方法,定量测定尿样中的麻黄碱和N-甲基麻黄碱。样品经Oasis MCX柱提取、纯化和富集后,采用电喷雾(ESI)离子源电离,正离子多反应监测(MRM)模式质谱进行定性和定量分析。麻黄碱和N-甲基麻黄碱在0.0250~2.50 μg/L质量浓度范围内线性关系良好,线性相关系数分别为0.9998和0.9992,提取回收率高于80%,提取效率的RSD小于5.0%,检出限均达到0.01 μg/L,可大大延长尿样检材中麻黄碱和N-甲基麻黄碱的检测周期。结果表明,该方法快速、准确,为尿液中痕量麻黄碱和N-甲基麻黄碱的分析提供了灵敏的分析方法。     

智能型色谱整体固定相的研究进展

整体柱作为新一代色谱固定相,具有原位制备、快速传质和高通透性的特点,近年来引起人们的极大关注。智能型聚合物作为一类功能性材料,能在温度、pH和盐等环境因素的刺激下产生特异性响应变化,通常被修饰到固相载体表面用来构造环境敏感性材料,使得该智能材料在药物控释、化学传感和细胞生长等领域有着广泛的应用。因此,在整体柱上构造智能型表面更为其在色谱领域的发展提供了新的契机。本文主要综述了近年来智能型整体柱在色谱领域的研究进展。     

硅胶-氰丙基复合固相萃取柱分离原油中饱和烃及芳烃组分

探讨了硅胶-氰丙基(SiO2/C3-CN,(1 g/0.5 g,6 mL))复合固相萃取柱分离与净化原油中饱和烃和芳烃组分的方法。结果表明:SiO2/C3-CN复合固相萃取柱较单一硅胶(SiO2)小柱的分离效果好,仅使用4.5 mL正己烷和4.5 mL正己烷-二氯甲烷(1∶1)洗脱即可实现饱和烃和芳烃组分的完全分离与满意回收(回收率分别为98%和99%);而单一硅胶小柱存在低环数芳烃化合物(如萘及其甲基系列、苊等)与饱和烃组分的共洗脱现象。通过对原油实物样品的测定,饱和烃和芳烃组分在硅胶-氰丙基复合柱上经正己烷、正己烷-二氯甲烷(体积比1∶1)的洗脱行为与标准混合液完全一致,该方法实用可靠、流程简单、试剂消耗少、精密度良好(RSD为4.2%～8.5%),适用于石油样品中饱和烃和芳烃组分的定量分析。     

Comprehensive characterisation of the E phase of 6-octyl-2-phenylazulene

Molecular dynamics in the soft crystal, E phase of 6-octyl-2-phenylazulene was studied by X-ray diffraction, and dielectric and Fourier transform infrared spectroscopies. Clear dielectric dispersion is observed due to the head-to-tail disordering in a kHz range around 400 K. The CH stretching frequencies exhibit more pronounced shifts at the phase transition point from the high-temperature ordered crystal to the E phase than that at the melting from the E phase to the isotropic liquid. The results are discussed in comparison with a typical E series, 4-n-alkyl-4′-isothiocyanatobiphenyl (n being the number of carbon atoms in the alkyl group).     

A transflective and viewing angle controllable blue-phase liquid crystal display

A polymer-stabilised blue-phase liquid crystal display (PSBP-LCD) with double-side in-plane switching (DS-IPS) electrode structure is proposed. This structure shows the transflective characteristics because the bottom electrodes are made by aluminium material. For transflective displays, it exhibits a well-matched voltage-dependent transmission and reflection curves through designing the width and gap of the top electrodes. When a bias voltage is applied on the top electrodes, it exhibits as a good viewing angle controllable display.     

New insights into the transitional behaviour of methyl-6-O-(n-dodecanoyl)-α-D-glucopyranoside using variable temperature FTIR spectroscopy and X-ray diffraction

The liquid crystalline behaviour of methyl-6-O-(n-dodecanoyl)-α-D-glucopyranoside, 1, has been characterised using X-ray diffraction and variable temperature Fourier transform infrared (FTIR spectroscopy). 1 exhibits a monotropic interdigitated smectic A phase consisting of bilayers in which the alkyl chains are overlapped. The crystal–isotropic transition is accompanied by a pronounced decrease in the strength of the hydrogen bonding network involving the sugar groups resulting in a marked change in the environment of the alkyl chains. The isotropic phase consists of disordered smectic-like domains stabilised via hydrogen bonding between the sugar groups. At the transition to the smectic A phase, a subtle change in hydrogen bonding is observed which is manifested by a change in the temperature dependence of the OH stretching peak position in the FTIR spectrum. On crystallisation, the strong hydrogen bonding network is re-established accompanied by a change in the conformational distribution of the alkyl chains. A model is proposed in which a combination of hydrogen bonding (enthalpic effects) and conformational arrangements (entropic effects) promotes initially the formation of smectic-like domains in the isotropic phase and subsequently stabilises the smectic A phase by inhibiting the microphase separation leading to the crystal phase.     

Morphology and molecular organisation of liquid-crystalline perylene-3,4,9,10-tetra-(n-hexylester) deposited on a solid substrate

Liquid-crystalline perylene-3,4,9,10-tetra-(n-hexylester) forms characteristic dendritic or flower-like structures at room temperature when it is deposited on a hydrophilic glass substrate using the zone-casting technique. It was found that such unique structures were not possible to be created simply by recrystallisation of this dye from a liquid-crystalline columnar phase. On the basis of the observations using a confocal microscope and the study of wide angle X-ray scattering (WAXS) as well as the analysis of the absorption and fluorescence spectra, some conclusions, concerning the molecular organisation in the dendritic structure, are drawn. Based on the research, one can assume that the dendrites are formed by columnar molecular aggregates with the column axes parallel to the substrate. Such an organisation of the molecules can be interesting from the point of view of organic electronics.