迁移管的电场强度对真空紫外电离-离子迁移谱仪性能的影响

离子迁移管是离子迁移谱仪的核心部分,它用来产生均匀的电场,以使不同迁移率的离子进行分离。本研究以丙酮为例,详细研究了本课题组所研制的真空紫外电离源-离子迁移谱仪中迁移管的电场参数对离子的灵敏度和分辨率的影响,发现电压的增大灵敏度增大,但是分辨率存在一个最佳的电压,这些结果可用于迁移谱的优化设计。     

Determination of the arc-root position in a DC plasma torch

The behavior of an arc operated in the nontransferred mode with a conical-shaped cathode and a nozzle-shaped anode is studied by applying general tyro-dimensional conservation equations and auxiliary relations for the simulation of arc channel flows. The position of the arc-root attachment at the anode surface is determined by using Steenbeck's minimum principle, which postulates a minimum arc voltage for a given current and certain given boundary conditions. The overall effects of the anode-arc root on the plasma flow are, studied by comparing the results with those of the transferred mode of operation. Specific arc-channel diameters are chosen in the simulation in order to verify flit, numerical model through comparisons with experimental results. The results show that Steenbeck's minimum principle is useful for determining the position of the arc-root attachment at the anode surface. Application of this method for control of the arc-anode attachment may be valuable in the design and operation of plasma spray torches to avoid jet instabilities.     

Some intriguing items in the history of scientific balances

The short survey covers the development of the balance since its invention in the Neolithic era. Scales have been used most probably first as tools in trading, but already in Old Egyptian papyrus its use in techniques is documented. Its theory was cleared by Aristotle and Archimedes and at least at that time it was used as a scientific instrument. Today the balance is still the most widely used instrument in science and there are still improvements.     

直流电弧自催化合成β-SiC纳米线

采用C,Si和SiO₂为反应原料,利用直流电弧法制备出长直的β-SiC纳米线。纳米线的直径为100～200 nm,长度为10～20 μm,并且沿着<111>方向生长。通过X射线衍射(XRD)、扫描电子显微术(SEM)、透射电子显微术(TEM)、拉曼光谱等手段,对β-SiC纳米线进行表征。探讨了β-SiC纳米线自催化气-液-固(VLS)生长机制。     

Ce-TiO_x超细粒子的模板法制备及结构研究

利用模板法结合真空干燥技术制备出Ce-TiOx超细粒子,用XRD,TG-DSC,TEM等手段进行表征;以甲基橙溶液的光催化降解测试Ce-TiOx超细粒子的催化活性;考察初始物质的量比及热处理温度对Ce-TiOx超细粒子的结构及光催化活性的影响。结果显示:钛干凝胶经400℃热处理可得结晶度较高的锐钛矿型TiO2,800℃时TiO2转变为金红石相;Ce-Ti干凝胶经800℃热处理可得粒径约为45 nm的类球形颗粒;Ce-TiOx超细粒子中,钛以Ti3O5,Ti6O11,TiO2等多种形式存在,铈以CeO2和Ce7O12的形式存在;稀土铈影响Ce-TiOx超细粒子中钛的价态。     

NaGdF4:Eu3+的结构和VUV荧光性质

利用水热方法合成了纯度较高的六方结构的ＮaGdF4,在氧气存在条件下950℃加热处理可以使其转变为CaF2型立方结构,在真空紫外光激发下,六方结构的NaGdF4:Eu^3 中的Gd^3 离子吸收一个光子,并将能量分两步传递给Eu^3 离子,发生双光子发射,立方结构的NaGdF4:Eu^3 中存在有一定量的氧离子取代缺陷,使Gd^3 离子4f-5d跃迁移到177nm附近,这与惰性气体放电产生的真空紫外波长一致。     

铜掺杂类金刚石纳米点阵列的制备及场发射性能研究

利用磁过滤等离子体结合氧化铝模板(AA0)技术在室温下制备了具有优异场发射性能的铜掺杂类金刚石(DLC)纳米点阵列.微观分析表明,铜掺杂类金刚石纳米点阵列分布均匀,密度高达109cm-2;利用X射线光电子能谱对制备的铜掺杂类金刚石纳米点阵列进行结构分析,测得铜的掺杂量为3.6;且sp3键含量高达60;;通过对铜掺杂类金刚石纳米点阵列的场发射性能测试,试验结果表明,铜掺杂类金刚石纳米点阵列开启电场和阈值电场分别为0.08V/μm,0.42V/μm,并且在电场值为0.67V/μm时,发射电流密度高达95mA/cm2,场发射性能明显优于无掺杂类金刚石纳米点阵列.     

刃型位错和圆弧形刚性线夹杂的干涉效应

位错和夹杂的干涉效应对于理解材料的强化和韧化机理具有十分重要的意义。文中研究了晶体材料中刃型位错和多条共圆弧刚性线夹杂的干涉作用。利用Riemann—Schwarz反照原理和复势函数的奇性主部分析技术，得到了问题的一般解答；对于只含一条刚性线夹杂的情况，给出了复势函数的封闭形式解。由Peach-Koehler公式求出了作用在刃型位错上的位错力，并讨论了圆弧形刚性线夹杂对位错力的影响规律，发现弧形刚性线对刃型位错有很强的排斥作用。本文解答不但可作为格林函数获得任意分布位错的相应解答，而且可以用于研究刚性线夹杂和任意形状裂纹的干涉效应问题。     

The pentacene films on the glass/ITO surface: structure and optical properties

Abstract

The structure, morphology and optical transmittance spectra of pentacene films on the (glass/ITO) surface were studied. The films were grown by two methods - the thermal vacuum deposition (TVD) and pulsed laser deposition (PLD). The electron diffraction pattern from thermally deposited pentacene films confirms their polycrystalline structure while the diffraction pattern of PLD-coated layers has a diffusion character. The results obtained showed that layers deposited by the TVD method has an optical spectrum that is characteristic for the pentacene film in contrary to the layers deposited by the PLD method. It is found a sensitivity of the optical transmittance of pentacene films to the ammonia action, which may be used for development the optical gas sensor.     

K9和石英玻璃基片上Au膜真空紫外反射特性研究

采用离子束溅射法,分别在经过不同前期清洗方法处理过的K9及石英玻璃光学基片上,选择不同的镀膜参量,镀制了多种厚度的Au膜。对镀制的Au膜在真空紫外波段较宽波长范围内的反射率进行了连续测量。测试结果表明:辅助离子源的使用方式、Au膜厚度对反射镜的反射率有重大影响。基片材料、镀前基片表面清洗工艺等对反射率也有一定影响。采用镀前离子轰击,可显著提高Au膜反射率及膜与基底的粘合力;获得最高反射率时的最佳膜厚与基片材料、镀膜工艺密切相关。对经过离子清洗的石英基片,膜厚在30 nm左右反射率最高;比较而言,石英基片可获得更高的反射率;辅助离子源的使用还显著影响获得最高反射率时对应的最佳膜厚值,且对K9基片的影响更显著。