LaxBa1—xCoO3系导电陶瓷导电性研究

对ＬａｘＢａ１－ｘＣｏＯ导电陶瓷的导电性及其导电机制进行了研究，在ｘ＝０．５ｍｏｌ处，导电陶瓷具有金属态导是性，在Ｌａ０．５Ｂａ０．５ＣｏＯ３陶瓷中，存在着氧缺位和导电电子，并且此种导电陶瓷具有较高的电子和氧离子混合导电特性。     

具有高光催化活性的黑色TiO2（B）/锐钛矿双晶TiO2-x纳米纤维

高效TiO2基光催化材料的开发一直是催化领域的研究热点,主要的策略是如何有效地分离光生载流子.制备多晶相的TiO2材料可引入异质/相结结构使电子与空穴朝不同方向移动,从而避免电子与空穴复合;另外,在TiO2中掺杂其他金属或非金属也可以有效地降低电子与空穴的复合率,掺杂的元素作为电子捕获阱俘获光生电子,以实现电子空穴的有效分离.近些年,作为一种全新的掺杂剂,氧空穴可以有效改善TiO2的光催化活性,所制TiO2具有可见光的全光谱吸收能力,因此该类TiO2呈现出黑色.通过上述方法均可以制备出高活性TiO2基光催化材料,如果能够将这些方法耦合一起,则可能制备出活性更高的光催化剂.因此,本文将异相结结构和空穴掺杂耦合起来,用多孔钛酸盐衍生物在H2中高温焙烧制得一种全新的黑色TiO2(B)/锐钛矿双晶TiO2–x纳米纤维.不同于其他TiO2基光催化材料,该样品仅由Ti和O元素组成,通过Ti和O元素的组合,形成了双晶结构和空穴掺杂两种特殊的结构,借助场发射(FESEM)、拉曼光谱(Raman)、氮气物理吸脱附、X射线光电子能谱(XPS)、热重(TG)、紫外可见漫反射光谱(UV-Vis)和荧光光谱(PL)等表征分析了样品的结构及其光催化性能间构效关系. FESEM结果显示,黑色TiO2(B)/锐钛矿双晶TiO2–x为长1–5mm、宽0.2mm的纤维结构, Raman结果表明,锐钛矿相在特征波段(140 cm–1左右)和TiO2(B)的特征波段(220–260 cm–1)均发生蓝移,说明该两相中均存在氧空穴;该样表面未检测到Ti3+,因此氧空穴可能分散在TiO2(B)和锐钛矿相的体相中.根据黑色TiO2(B)/锐钛矿双晶TiO2–x和白色TiO2(B)/锐钛矿双晶TiO2的失重差,估算出前者的O/Ti原子比为1.97.光催化降解甲基橙实验结果显示,黑色TiO2(B)/锐钛矿双晶TiO2–x的光催化活性是白色双晶TiO2的4.2倍,锐钛矿TiO2的10.5倍,且连续反应10次后未出现失活现象,显示出了良好的光催化稳定性.前期,我们已经证明了白色TiO2(B)/锐钛矿双晶TiO2由于具有TiO2(B)和锐钛矿的异相结结构,致使其电子空穴有效地分离,从而表现出优异的光催化活性;本文的PL结果显示,由于氧空穴的引入,异相结与氧空穴两者共同作用,进一步促进了黑色TiO2(B)/锐钛矿双晶TiO2–x电子与空穴的有效分离,因此黑色TiO2(B)/锐钛矿双晶TiO2–x表现出高的光催化活性.由于其特殊的结构,黑色TiO2(B)/锐钛矿双晶TiO2–x纳米纤维将在环境与能源领域表现出良好的应用前景.     

Formation Enthalpy Calculation of Oxygen Vacancy Defect in Doped Lithium Niobate Crystals

The relationship between temperature and oxygen vacancy concentration is deduced in this paper. Based on the data of thermal weight-loss experiment, the formation enthalpies of congruent and several doped LN crystals have been calculated. It was found that the formation enthalpy of oxygen vacancies can be decreased evidently by doping valence-changeable ions. The experimental results were discussed and a new reduction process of the photorefractive LN crystal at a relatively low temperature was proposed, and the reduced crystals showed a good effect in practical use.     

Crystal Structure and Property of Perovskite-Type Oxides Containing Ion Vacancy

Studies on the role of oxygen vacancy in structural change of nonstoichiometric perovskites and a property of oxygen-deficient perovskite-related K₂NiF₄ compounds are reviewed.The structural changes on which the authors focused are cation ordering and lattice distortion. The relationship between the distortion and oxygen vacancy was investigated by comparing the structures of Sr₂(Sr_1-xM_x)TaO_6-d (M = Ca²⁺ and Nd³⁺) solid solutions. It was found that distortion of a perovskite-type lattice decreased with an increasing amount of oxygen vacancies. In order to investigate the relationship between the cation ordering on octahedral sites and oxygen vacancy, structures of stoichiometric Sr_2-xLa_xCo_1-yTa_1+yO₆ and oxygen-deficient Sr_2-xLa_xMg_1-yTa_1+yO_6-d solid solutions were compared. The authors' work reveals that the cation ordering affects the amount of oxygen vacancies in addition to cation charge and size.     

自掺杂TiO2纳米管：液相制备及光催化性能

采用水合肼（N₂H₄·H₂O）作为还原剂,在液相环境中制备了自掺杂TiO₂纳米管阵列（NTs）。利用FE-SEM、EDS、XPS、XRD、Raman、UV-Vis/NIR分光光度法以及半导体特性分析系统（Keithley 4200 SCS）分别对样品的形貌,晶体结构,光学特性以及电学性能进行了表征。结果表明：通过这种方法制备的自掺杂TiO₂NTs在带隙中引入了大量的氧空位,创造了氧空位能级,从而提高了样品的电导率,有效提高光生电子-空穴对的产生、分离和传输。此外,由于氧空位的作用,使得TiO₂NTs的带隙变窄,增强了可见光吸收能力,致使样品具有较高的光催化活性,并通过降解甲基橙溶液对样品的光催化活性进行评估。结果显示当光照150min后,自掺杂TiO₂NTs对甲基橙溶液的降解率达73%,并且这种催化剂便于回收和重复使用。     

Suppression of Photoinduced BBO Defects Generation on TIO2（110） by Water

We have investigated creation of variable concentrations of defects on TIO2（110）-（1×1） surface by 266 nm laser using temperature programmed desorption technique. Oxygen-vacancy defects can be easily induced by ultraviolet light, the defects concentration has a linear dependence on power density higher than 50 mW/cm2 for 90 s irradiation. No observation of O2 molecule and Ti atom desorption suggests that UV induced defects creation on TiO2（110）-（1×1） is an effective and gentle method. With pre-dosage of thin films of water, the rate of defects creation on TiO2（110）-（1×1） is slower at least by two orders of magnitude than bare TiO2（110）-（1×1） surface. Further investigations show that water can be more easily desorbed by UV light, and thus desorption of bridging oxygen is depressed.     

K促进的纳米片状水滑石衍生CoAlO金属氧化物催化碳烟燃烧

采用水热法合成了负载K的纳米片状水滑石衍生CoAlO金属氧化物,其表现出优异的催化碳烟燃烧活性.氢气-程序升温还原（H₂-TPR）实验结果表明,K与Co之间的相互作用提高了催化剂的氧化还原性能.X射线光电子能谱（XPS）分析结果表明,K的负载增大了表面Co²⁺/Co³⁺的比例,促进了氧空位的产生,提高了催化剂对气相氧的吸附能力.碳烟-程序升温还原（Soot-TPR）实验结果表明,K的负载增加了表面吸附氧数量.动力学实验结果表明,K的负载增加了单位质量催化剂上的活性氧数量、反应速率和转化频率（TOF）,从而提高了催化剂的本征活性.另外,碳烟颗粒可以分散在纳米片的层间,与活性位点的接触效率得到提高,也有利于提高催化碳烟燃烧活性.     

Oxygen vacancy O-terminated surface: The most exposed surface of hexagonal WO3 (001) surface

It is known that exposed surface determines material’s performance.WO₃ is widely used in gas sensing and its working surface is proposed to control its sensitivity.However,the working surface,or most exposed surface with detailed surface structure remain unclear.In this paper,DFT calculation confirmed that oxygen vacancy O-terminated surface is the most exposed hexagonal WO₃(001) surface,judging from competitive adsorption of CO and O₂,working surface determinati...     

一锅法合成Ce_xZr_(1-x)O_2固溶体催化剂用于热化学循环分解CO_2制CO

采用一锅蒸发诱导自组装法(EISA)制备了一系列不同铈锆物质的量比的铈锆固溶体催化剂,用TGA研究了其热化学循环分解CO_2制CO的催化性能,并采用XRD、Raman光谱、H2-TPR、XPS、SEM和N_2吸附-脱附等手段对催化剂的物相结构、还原性能和表面化学性质进行了表征分析,用热重分析(TGA)研究了铈锆固溶体对热化学循环分解CO_2制CO的催化性能。结果表明,随着Ce/Zr物质的量比增加,铈锆固溶体催化剂的CO_2高温分解活性先增大后减小。Ce/Zr物质的量比为1的Ce_(0.5)Zr_(0.5)O_2催化剂由于具有较多的晶格缺陷和氧空穴,氧迁移能力强,催化活性高,而Ce/Zr物质的量比为3的Ce_(0.75)Zr_(0.25)O_2催化剂具有相对稳定的氧空穴数,循环稳定性好。循环反应后,所有的催化剂均出现了一定程度的烧结,且富锆固溶体发生了相分离,这可能会影响催化剂的性能。