钛表面二氧化钛膜中氧空位点缺陷传输性能的电化学研究

"钛/TiO2氧化膜/溶液"界面电极体系的电化学性能主要决定于钛表面的TiO2氧化物膜.本文利用多种电化学技术,结合半导体物理的Mott-Schottky分析和Einstein方程,研究了金属钛在1.0mol·L-1HClO4溶液中表面半导体TiO2氧化膜的生长及氧化膜中氧空位点缺陷在外加电场作用下的传输性能,并根据离子性电荷传输与电子性电荷传输对电场变化响应时间之不同特点,确定氧化膜中点缺陷扩散系数.结果表明,电极电位或阳极析氧反应对稳态电流(iss)、氧化膜的阳极化常数(α)、膜中电场强度()、以及膜中氧空位点缺陷的扩散系数(D0)等重要物理化学参数,均有显著影响,并依据氧化膜中的结构变化进行分析.     

Construction of hole‐transported MoO3‐x coupled with CdS nanospheres for boosting photocatalytic performance via oxygen‐defects‐mediated Z‐scheme charge transfer

The establishment of Z‐scheme charge transfer between semiconductors is an effective method to improve the performance of hybridized semiconductor photocatalysts. Herein, the novel photocatalysts consisting of MoO_3‐x and varying amounts of cadmium sulfide (CdS) nanospheres were successfully prepared via the one‐pot hydrothermal method in the presence of polyvinylpyrrolidone (PVP). It is indicated that the PVP not only served as the reducing agent for the formation of oxygen defects in MoO_3‐x, but also the cross‐linking agent for the coupling between MoO_3‐x and CdS. The CdS/MoO_3‐x composite allowed for higher visible‐light photocatalytic performance for enhanced removal of methylene blue and tetracycline with an efficiency of 97.6% and 85.5%, respectively. The improved performance of the CdS/MoO_3‐x composite was found to be mainly attributable to the remarkable charge carrier separation and transfer between CdS and MoO_3‐x based on the favorable hole‐transporting nature and oxygen deficiencies of MoO_3‐x. In addition, the hole‐oxidized photocorrosion of CdS was efficiently suppressed due to the presence of hole‐attractive MoO_3‐x. At the solid interface, an oxygen‐defects‐mediated Z‐scheme charge carrier transfer pathway was proposed as the underlying mechanism for the superior photocatalytic reaction.     

The remarkable enhancement of CO-pretreated CuO-Mn2O3/γ-Al2O3 supported catalyst for the reduction of NO with CO: the formation of surface synergetic oxygen vacancy

NO reduction by CO was investigated over CuO/γ-Al2O3, Mn2O3/γ-Al2O3, and CuOMn2O3/γ-Al2O3 model catalysts before and after CO pretreatment at 300 °C. The CO-pretreated CuO-Mn2O3/γ-Al2O3 catalyst exhibited higher catalytic activity than did the other catalysts. Based on X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV/Vis diffuse reflectance spectroscopy (DRS), Raman, and H2-temperature-programmed reduction (TPR) results, as well as our previous studies, the possible interaction model between dispersed copper and manganese oxide species as well as γ-Al2O3 surface has been proposed. In this model, Cu and Mn ions occupied the octahedral vacant sites of γ-Al2O3, with the capping oxygen on top of the metal ions to keep the charge conservation. For the fresh CuO/γ-Al2O3 and Mn2O3/γ-Al2O3 catalysts, the -Cu-O-Cu- and -Mn-O-Mn- species were formed on the surface of γ-Al2O3, respectively; but for the fresh CuO-Mn2O3/γ-Al2O3 catalyst, -Cu-O-Mn- species existed on the surface of -Al2O3. After CO pretreatment, -Cu-□-Cu- and -Mn-□-Mn- (□ represents surface oxygen vacancy (SOV)) species would be formed in CO-pretreated CuO/γ-Al2O3 and CO-pretreated Mn2O3/γ-Al2O3 catalysts, respectively; whereas -Cu-□-Mn- species existed in CO-pretreated CuO-Mn2O3/γ-Al2O3. Herein, a new concept, surface synergetic oxygen vacancy (SSOV), which describes the oxygen vacancy formed between the individual Mn and Cu ions, is proposed for CO-pretreated CuO-Mn2O3/γ-Al2O3 catalyst. In addition, the role of SSOV has also been approached by NO temperature-programmed desorption (TPD) and in situ FTIR experiments. The FTIR results of competitive adsorption between NO and CO on all the CO-pretreated CuO/γ-Al2O3, Mn2O3/γ-Al2O3, and CuO-Mn2O3/γ-Al2O3 samples demonstrated that NO molecules mainly were adsorbed on Mn2+ and CO mainly on Cu+ sites. The current study suggests that the properties of the SSOVs in CO-pretreated CuO-Mn2O3/γ-Al2O3 catalyst were significantly different to SOVs formed in CO-pretreated CuO/γ-Al2O3 and Mn2O3/γ-Al2O3 catalysts, and the SSOVs played an important role in NO reduction by CO.     

钙钛矿型 Ba0.97Ca0.03Sn0.08Ti0.92O3-δ作为多硫化物固定剂在锂硫电池中的应用

制备具有氧空位的钙钛矿结构的Ba_0.97Ca_0.03Sn_0.08Ti_0.92O_3-δ(BCST)材料并将其作为多硫化物的固定剂,通过强的化学键合作用抑制多硫化物(LiPS)穿梭。作为促进LiPS转化的催化剂,BCST/KB/S(KB为科琴黑)正极在0.1C下提供了1 164.3 mAh·g^-1的初始放电容量,以及优异的循环稳定性。经过800次的充放电循环后,平均每次循环的容量衰减率仅为0.052%。     

氧空位和磷掺杂协同增强铁钴基材料电解水催化性能

为了研发高效、稳定的电解水催化剂,我们以氧空位和磷掺杂为基础,通过原位浸泡生长和两步热处理的方法,在泡沫铁上合成具有氧空位和磷掺杂的纳米花结构作为析氢反应(HER)和析氧反应(OER)双功能电催化剂。CoFe₂O₄已被报道为一种很有前途的OER和氧还原反应(ORR)电催化剂,然而CoFe₂O₄在HER中表现出电导率差、电催化反应慢的特性。CoFe₂O₄中氧空位(Ov)的形成可以有效调控催化剂表面的电子结构,有助于产生更多的缺陷和空位,从而提高OER的活性。随后,引入磷原子填充在空位中,制备的P-Ov-CoFe₂O₄/IF在碱性电催化测试中展现出优异的HER和OER性能,在10 mA·cm^-2电流密度下HER和OER过电位仅为54和191 mV,Tafel斜率分别为57和54 mV·dec^-1,并具有良好的循环稳定性。     

Visible-light-driven Oxygen Vacancy and Carbon Doping of C@TiO2-x Photocatalyst for Enhanced Pollutants Degradation Performance

Oxygen Vacancy (OVs) and carbon doping of the photocatalyst body will significantly enhance the photocatalytic efficiency. However, synchronous regulation of these two aspects is challenging. In this paper, a novel C@TiO_2-x photocatalyst was designed by coupling the surface defect and doping engineering of titania, which can effectively remove rhodamine B (RhB) and has a relatively high performance with wide pH range, high photocatalytic activity and good stability. Within 90 minutes, the photocatalytic degradation rate of RhB by C@TiO_2-x (94.1 % at 20 mg/L) is 28 times higher than that of pure TiO₂. Free radical trapping experiments and electron spin resonance techniques reveal that superoxide radicals (⋅O²⁻) and photogenerated holes (h⁺) play key roles in the photocatalytic degradation of RhB. This study demonstrates the possibility of regulating photocatalysts to degrade pollutants in wastewater based on an integrated strategy.     

Relationships of surface oxygen vacancies with photoluminescence and photocatalytic performance of ZnO nanoparticles

ZnO is one of important semiconductor materials,applied widely in the fields such as the cerams, piezo-electric sensors, catalysts and luminescence apparatus.ZnO nanoparticles not only are ideal materials to pre-pare newly electronic apparatus[1], but als…     

Bifunctional metal-free KAUST Catalysis Center 1 (KCC-1) as highly active catalyst for syngas production via methane partial oxidation

The metal-free KAUST Catalysis Center 1 (KCC-1) was synthesized through microemulsion method with microwave assistance and was assessed for methane partial oxidation (MPO) under various operating conditions. The electronic spin resonance spectroscopy, pyridine-probed infrared spectroscopy, and temperature-programmed desorption of oxygen measurement indicated that the concentration of BrØnsted acid sites and oxygen vacancies in KCC-1 were at least 2-fold higher than its counterparts, which benefited MPO activity via the promotion of adsorption and dissociation of gaseous reactants. The principal species detected by post-reaction X-ray photoelectron spectroscopy (XPS) was surface-adsorbed oxygen species; its relative percentages among all oxygen species reduced in the order spent KCC-1 (77.1%) > spent MCM-41 (Mobil Composition of Matter number 41; 41.4%) > spent SiO₂ (?). The catalytic performance followed the same trend, suggesting that the surface-adsorbed oxygen species was the key factor for MPO process. Additionally, the carbon deposition rate increased in the order SiO₂ (16.8 mol/g_cat/s) > MCM-41 (11.7 mol/g_cat/s) > KCC-1 (7.7 mol/g_cat/s), consistent with the results of post-reaction Raman measurements. By coupling the in situ Fourier-transform infrared and XPS results, it is suggested that the high concentration of oxygen vacancies in KCC-1 contributed to activate the CH₄ molecules on acid sites via different O1-assisted kinetically relevant C–H bond activation mechanism for combustion-reforming pathway; meanwhile it provided an excellent adsorption-desorption cycle of O^2? species to inhibit the carbon deposition, thus creating a bifunctional reaction mechanism in MPO reaction.     

氧空位修饰的暴露TiO2{001}的Ru/TiO2增强光热协同CO2甲烷化活性和稳定性

利用太阳能在温和条件下实现CO₂还原反应,不仅可以缓解过度消耗化石能源造成的能源危机,还可以改善诸如温室效应和海洋酸化等环境问题.光热协同催化可以有效降低催化反应温度,具有较大的应用前景.本文利用Ru与暴露TiO₂{001}晶面的TiO₂载体产生的金属-载体相互作用,经过高温氢气煅烧后,获得具有丰富表面氧空位的Ru/TiO₂催化剂.活性测试结果表明,具有丰富表面氧空位的Ru/TiO₂表现出优异的CO₂甲烷化活性,反应过程中甲烷的TOF值在300°C时可以达到22 h-1,但该催化剂却表现出较差的稳定性,在反应10小时后,甲烷的TOF值逐渐降低到19 h-1.将紫外光引入到Ru/TiO₂热催化甲烷化体系中,甲烷的TOF值增加到30 h-1,且兼具高稳定性.热催化反应过程中逐渐消失的表面氧空位和部分氧化的Ru是活性降低的主要原因.在光热协同反应中,光生电子的产生稳定了Ru表面的电子密度,同时也再生了催化剂上表面氧空位,这有效地提高了反应的活性和稳定性.程序升温原位红外和X射线光电子能谱实验结果表明,当催化剂表面具有丰富的表面氧空位时,CO₂可以有效地在Ru纳米粒子上解离成CO中间体,随后吸附在Ru上的CO中间体解离成表面碳物种,并加氢产生甲烷.在热催化反应过程中,Ru纳米粒子逐渐被氧化成Ru Ox物种,且表面氧空位被CO中间物种覆盖,降低了催化反应的稳定性.当紫外光引入到上述反应中,催化剂的表面氧空位可有效提高光生载流子的分离能力.TiO₂载体产生的光电子转移至Ru表面,稳定了金属Ru纳米粒子的价态.另外,载体产生的光生空穴加速了H₂质子化,提高了催化剂对氢气的活化迁移能力,促进了CO中间体的加氢甲烷化反应,进而再生表面氧空位.因此在紫外光照下,兼顾提高了热催化CO₂甲烷化的活性和稳定性.值得注意的是,当Ru负载于暴露少量TiO₂{001}晶面的TiO₂载体上时,产生了强金属-载体相互作用并抑制了H₂在催化剂上的吸附活化,不利于产生表面氧空位.因此暴露少量TiO₂{001}晶面的Ru/TiO₂催化剂也不利于光生载流的产生和分离,这导致热催化或光热协同催化反应活性较低.     

近红外光热转换剂氧缺陷二氧化钼的制备及其在光热治疗中的应用

通过水热合成法,以五氯化钼（MoCl₅）为钼源,聚乙烯吡咯烷酮（PVP）为结构导向剂和还原剂,制备了二氧化钼（MoO₂）纳米颗粒,对纳米材料进行X射线粉末衍射（XRD）、透射电镜（TEM）、紫外可见近红外（UV-Vis-NIR）吸收光谱、X射线光电子能谱（XPS）、电子自旋共振谱（EPR）等表征,结果表明制备的MoO₂纳米颗粒粒度约18 nm,粒度均匀,具有丰富的氧缺陷,在650~1 100 nm的近红外区具有良好的光吸收能力。光热测试表明该材料100 μg·mL^-1的水溶液10 min内升温达31.5℃,光热转换率高达67.9%,并且具有优异的光热稳定性。细胞毒性实验表明低剂量的该纳米材料对细胞几乎没有毒性,且对肝癌细胞的光热杀伤效果明显。