13C核磁共振研究磺化脲醛树脂的反应机理

利用^13CNMR数据证实了在低磺化剂用量下脲醛树脂的磺化改性仍可发生,并对磺化脲醛（SUF）树脂制备过程中的羟甲基化、缩合、磺化及缩聚等各步反应机理进行了探讨.明确了SUF树脂的^13CNMR谱图中各峰位所对应的结构单元,认为3个未知峰的出现与磺化改性得到的一些新结构单元有关,并对它们的结构进行了推测.通过对比不同磺化和缩聚反应程度下得到的SUF产物的^13CNMR数据,对磺化和缩聚反应后某些结构的出现和消失进行了解释.     

N-(4,6-二甲氧基嘧啶-2-基)-N'-磷酰基脲类衍生物的合成及生物活性

利用二氯代磷酰基异氰酸酯与4,6-二甲氧基-2-氨基嘧啶的加成反应合成了中间体N-(4,6-二甲氧基嘧啶-2-基)-N'-二氯代磷酰基脲(Ⅰ).Ⅰ与2倍的醇或胺反应得到对称双取代磷酰基脲类化合物Ⅱa_Ⅱi;Ⅰ与1倍的胺反应得到氯代磷酰基脲类化合物Ⅲa_Ⅲe,再与1倍的醇反应则得到不对称双取代磷酰基脲类化合物Ⅳa_Ⅳg.生物活性测定结果表明,化合物Ⅱ、Ⅲ和Ⅳ均显示一定除草活性.     

Isoselective Ring-opening Polymerization of Racemic Lactide Catalyzed by N-heterocyclic Olefin/(Thio)urea Organocatalysts

The isoselective ring-opening polymerization of racemic lactide was achieved by combining N-heterocyclic olefin(NHO) with mono(thio)ureas or bis(thio)ureas as catalytic systems. The polymerization process shows high stereoselectivity, controllability and reactivity,delivering multi-block isotactic polylactides with high chain-end fidelity and narrow molecular weight distributions. The enhancement of catalytic performance was observed in the following order: bisthiourea(DTU) monothiourea(TU) bisurea(DU) urea(U). The highest Pm(probability of forming a meso dyad) = 0.91 was observed at-70 °C when using NHO/U1 catalytic system and the high stereoselectivity was attributed to chain-end control mechanism.     

Synthesis and characterization of some Cr(III), Fe(III) and Zr(IV) compounds with substituted o-hydroxy benzophenone

This work presents our data concerning the synthesis and characterization of some Cr(III), Fe(III) and Zr(IV) complexes with substituted (2-hydroxy-4-methoxy-phenyl)-phenyl-methanone - C₁₄H₁₂O₃, denoted by (L1). The synthesis of these complex compounds was performed using melted urea as reaction medium. The obtained complexes have been studied by chemical analysis, IR spectroscopy, X-ray diffraction and thermogravimetric analysis. Based on the data resulting from the thermal behaviour of the studied complex compounds, the kinetic parameters of the thermal decomposition reactions have been determined. This revised version was published online in July 2006 with corrections to the Cover Date.     

含聚醚间隔链的扩链脲改性环氧树脂/双氰双胺固化体系性能研究

合成了一系列含不同分子量聚环氧丙烷 (PPG)柔性间隔链的扩链脲 ,系统考察了扩链脲改性环氧树脂E 5 1/双氰双胺 (dicy)固化体系的固化反应活性、动态力学行为、冲击性能和断裂面形态结构 ,并对体系的冲击性能、形态结构与动态力学行为之间的关系进行了探讨 .结果表明 ,改性体系固化反应活性明显提高 ,固化反应表观活化能降低 ,固化反应峰顶温度从 190℃降低至 14 0℃ ,固化反应的表观活化能由 14 5 5kJ/mol降至 70～ 80kJ mol;改性体系冲击强度明显提高 ,其中所含PPG柔性链分子量为 10 0 0的扩链脲改性的E 5 1/dicy体系冲击强度较未改性的E 5 1/dicy体系提高了 8倍 ,其冲击试样断裂面的形态具有明显的韧性断裂特征 ,微观两相网络结构的存在导致了改性体系冲击强度显著提高     

微波常压法制备三聚氰酸

研究了在常压条件下尿素与助溶剂通过微波辐射制备三聚氰酸的反应条件，结果表明，采用594W微波辐射3min，转化率达83．5％。     

密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

Effect of Some Urea Derivatives on Measurement of pH with Glass Electrodes

Abstract

In solutions containing some urea or thiourea derivatives and alkali metal hydroxides at pH 6 to 10, the pH value measured with glass electrodes changes with time. The degree of change varies between 0.1 and 1.0 pH units and depends on the structure of the urea derivative, its initial concentration, and the glass electrode used, but not on the cation of the alkali metal hydroxide added. In contrast, pH measured in the same solution with a quinhydrone electrode or the UV spectra remain time-independent. It is proposed that urea derivatives are adsorbed in the gel at the surface of the glass electrode and there affect the ion-exchange process.     

Sol-Gel Synthesis of Transparent Alumina Gel and Pure Gamma Alumina by Urea Hydrolysis of Aluminum Nitrate

-Alumina was synthesized by a sol-gel method with the aluminum ion hydrolysis control performed by urea. The initial saturated Al³⁺/urea solution presented urea coordinated with the aluminum ion, as shown in the ¹³C NMR and ²⁷Al NMR spectra and longitudinal relaxation times, T ₁, from the latter. The substitution of water molecules in the Al³⁺ coordination shell by urea controlled the hydrolysis process and provided an extensive nucleation during the initial steps of the aluminum hydroxide formation due to urea thermolysis at 90°C. The resulting sol, composed of Al(OH)₃ nanoparticles, coalesced and became a transparent gel permeated by a solution of urea and the polycation ion [Al₁₃O₄(OH)₂₄(H₂O)₁₂]⁷⁺. The freshly prepared gel was transformed, under heating at 300°C, directly to -alumina, characterized by FTIR, ²⁷Al-MAS-NMR and S_BET techniques, without - or -phases, as a consequence of the high degree of homogeneity of the -alumina precursor.     

Urea method for the synthesis of hydrotalcites

Mg-Al, Zn-Al and Ni-Al hydrotalcite-like compounds with high crystallinity were synthesized by using the decomposing property of urea at high temperature. The crystallinity and the regularly of the samples were much preferable to those synthesized by other methods. This revised version was published online in June 2006 with corrections to the Cover Date.