铸膜液溶剂体系的物理参数与BCA不对称膜的透气性

铸膜液的溶剂体系（溶剂和非溶剂）对不对称膜形态的形成有重要作用。为了探索溶剂和透气性间的关系，本文考虑到了制备ＢＣＡ梯度密度不对称膜的各种溶剂的一系列物理参数，得到了一些定性结果，并指出了更全面、明确、解释两者关系的研究方向。     

Extraction of local coordination structure in a low‐concentration uranyl system by XANES

Obtaining structural information of uranyl species at an atomic/molecular scale is a critical step to control and predict their physical and chemical properties. To obtain such information, experimental and theoretical L₃‐edge X‐ray absorption near‐edge structure (XANES) spectra of uranium were studied systematically for uranyl complexes. It was demonstrated that the bond lengths (R) in the uranyl species and relative energy positions (ΔE) of the XANES were determined as follows: ΔE₁ = 168.3/R(U—O_ax)² ? 38.5 (for the axial plane) and ΔE₂ = 428.4/R(U—O_eq)² ? 37.1 (for the equatorial plane). These formulae could be used to directly extract the distances between the uranium absorber and oxygen ligand atoms in the axial and equatorial planes of uranyl ions based on the U L₃‐edge XANES experimental data. In addition, the relative weights were estimated for each configuration derived from the water molecule and nitrate ligand based on the obtained average equatorial coordination bond lengths in a series of uranyl nitrate complexes with progressively varied nitrate concentrations. Results obtained from XANES analysis were identical to that from extended X‐ray absorption fine‐structure (EXAFS) analysis. XANES analysis is applicable to ubiquitous uranyl–ligand complexes, such as the uranyl–carbonate complex. Most importantly, the XANES research method could be extended to low‐concentration uranyl systems, as indicated by the results of the uranyl–amidoximate complex (～40 p.p.m. uranium). Quantitative XANES analysis, a reliable and straightforward method, provides a simplified approach applied to the structural chemistry of actinides.     

乙酸乙酯合成反应的实时在线拉曼光谱测量

本文报道一种用于在线拉光谱测量的技术。可以在工业生产过程中对产品的成分和工作条件进行实时的监测,在本实验中,用我们自己研制的光纤探头,配合现有的拉曼光谱装置对合成乙酸乙酯的化学反应过程进行了实时跟踪测量。得到了反应过程中乙醇-,乙酸和乙酸乙酯的拉曼光谱,从谱图分析了它们的特征峰与时间的关系,从而可由这些结果确定在此实验条件下反应物与生成物的浓度随时间的变化,进而可确定反应过程完成的时间。     

Damping Properties of Blends Based on EVM

The mechanical and damping properties of blends of ethylene-vinyl acetate rubber (VA content >40% wt) (EVM)/ethylene-propylene-diene copolymer (EPDM) and EVM/nitrile butadiene rubber (NBR), both with 1.4 phr BIPB (bis (tert-butyl peroxy isopropyl) benzene) as curing agent, were investigated by dynamic mechanical analysis (DMA). The effect of added polyvinyl chloride (PVC), amido donor N-cyclohexyl-2-benzothiazole sulfonamide (CZ), and dicumyl peroxide (DCP) as a substitute curing agent, on the damping and mechanical properties of both rubber blends were studied. The results showed that in EVM/EPDM/PVC blends, EPDM was immiscible with EVM and could not expand the damping range of EVM at low temperature. PVC was miscible with EVM and dramatically improved the damping property of EVM at high temperature while keeping good mechanical performance. In EVM/NBR/PVC blends, PVC was partially miscible with EVM/NBR blends and remarkably widened the effective damping temperature range (EDTR) from 41.1°C for EVM/NBR to 62.4°C. Curing agents BIPB and DCP had a similar influence on EVM/EPDM blends. DCP, however, dramatically raised the height of tan δ peak of EVM/NBR = 80/20 and expanded its EDTR to 64.9°C. CZ had no obvious influence on the EVM/EPDM blends cured with BIPB. However, a small content of CZ enlarged the tan δ peak of EVM/NBR = 80/20 in both height and width, but at the cost of a deterioration of mechanical performance.     

Fabrication and Optimization of Poly(vinyl alcohol)/Zirconium Acetate Electrospun Nanofibers Using Taguchi Experimental Design

This paper presents an investigation regarding poly(vinyl alcohol)/zirconium acetate (organic–inorganic) (PVA/Zrace) nanofibers prepared by electrospinning which could be used as a precursor for fabricating ceramic metal oxide nanofibers. The effect of some processing variables, including polymer solution concentration, tip to collector distance and applied voltage of electrospinning, and the amount of Zrace and their interactions, on the diameter of the nanofibers were studied. Taguchi experimental design and a statistical analysis (ANOVA) were employed and the relationship between experimental conditions and yield levels determined. It was concluded that to obtain a narrow diameter distribution as well as maximum fiber fineness, a polymer concentration of 10 wt%, tip to collector distance of 18 cm and applied voltage of 20 kV variables were the optimum. Furthermore, it was also concluded that the ratio of Zrace (6 g) to PVA solution (10% wt) played an important role for achieving the minimum fiber diameter. Under these optimum conditions, the diameters of the electrospun composite fibers ranged from 86 nm to 381 nm with a diameter average of 193 nm. The experiments were done with Qualitek-4 software with “smaller is better” as the quality characteristics. The optimized conditions showed an improvement in the fibers diameter distribution and the average fibers diameter showed good resemblance with the result predicted using the Taguchi method and the Qualitek-4 software. The ANOVA results showed that all factors had significant effects on the fibers diameter and distribution, but the effect of PVA concentration and zirconium acetate were more significant than the other factors.     

Tris‐amidoximate uranyl complexes via η2 binding mode coordinated in aqueous solution shown by X‐ray absorption spectroscopy and density functional theory methods

The present study sheds some light on the long‐standing debate concerning the coordination properties between uranyl ions and the amidoxime ligand, which is a key ingredient for achieving efficient extraction of uranium. Using X‐ray absorption fine structure combined with theoretical simulation methods, the binding mode and bonding nature of a uranyl–amidoxime complex in aqueous solution were determined for the first time. The results show that in a highly concentrated amidoxime solution the preferred binding mode between UO₂²⁺ and the amidoxime ligand is η² coordination with tris‐amidoximate species. In such a uranyl–amidoximate complex with η² binding motif, strong covalent interaction and orbital hybridization between U 5f/6d and (N, O) 2p should be responsible for the excellent binding ability of the amidoximate ligand to uranyl. The study was performed directly in aqueous solution to avoid the possible binding mode differences caused by crystallization of a single‐crystal sample. This work also is an example of the simultaneous study of local structure and electronic structure in solution systems using combined diagnostic tools.     

Matrix Isolation ir Spectra of Methyl Acetate II.Stoechiometry of Methyl Acetate…H2O Complexes in AR Matrices. Comparison with Methyl Benzoate…H20

The earlier reported matrix system methylacetate/ H₂O/Ar has been reinvestigated by IR spectroscopy. The complex band pattern of the ester ν _c=0 and the water ν₃, ν₁ and ν₂ modes can be explained by the coexistence of 1:1, linear 1:2 and linear 2:1 H-bonded complexes. The study of methyl benzoate/H₂O/Ar supports the proposed interpretation.     

Luminescent Properties of a Polymer Photoluminescent Composite Containing the Binuclear (EU,TB) Complex as an Emitter

Uninuclear europium (Eu), as well as binuclear Eu and terbium (Tb), complexes were synthesized using acrylic acid (AA) as the first ligand and 1,10-phenanthroline (Phen) as the second ligand. The relative weight ratio of the europium (III) (Eu³⁺) to terbium (III) (Tb³⁺) ions of the binuclear complex was 1:1 as determined via energy dispersive X-ray analysis. The structures of the Eu(AA)₃Phen and Eu_0.5Tb_0.5(AA)₃Phen complexes were characterized by Fourier transform infrared spectroscopy. A series of tri-cellulose acetate (TCA)/ the Eu(AA)₃Phen and TCA/Eu_0.5Tb_0.5(AA)₃Phen composites were prepared by solution blending, and their luminescent properties were investigated by fluorescence spectrophotometry. The excitation spectra of all composites indicated that the TCA matrix probably affected the energy absorption and transfer of organic ligands. In TCA/Eu_0.5Tb_0.5(AA)₃Phen composites the introduced Tb³⁺ ions had some influence on energy absorption and transfer of organic ligands; the energy transfer process of the complex is suggested to be as follows: Phen→AA→Tb³⁺ion→Eu³⁺ion. The emission spectra indicated that the luminescent intensity of the TCA/Eu_0.5Tb_0.5(AA)₃Phen composites was noticeably stronger than that of the TCA/Eu(AA)₃Phen composites, suggesting that the comparatively stable and high-efficiency energy transfer process was only slightly influenced by the TCA matrix. In summary, the TCA/Eu_0.5Tb_0.5(AA)₃Phen (90/10) composite possesses fine luminescent properties for potential usage as red fluorescent materials.     

Lightweight Polymer Composites from Waste Materials: A Solution to Environmental Pollution

Several new lightweight polymer concretes derived from industrial, agricultural, and naturally occurring waste materials were investigated. Various physicomechanical properties of these materials were studied. Such inexpensive and lightweight polymer composites, which have properties superior to ordinary reinforced cement concrete, may find wide applications in building technology and related areas and may serve as better substitutes for cement. Furthermore, recycling of such wastes from various sources may help to solve the present environmental pollution problems.