Electrochemical Impedance Analysis of Thermogalvanic Cells

Thermogalvanic cells(also known as thermo-electrochemical cells) that convert waste heat energy to electricity are a new type of energy conversion device. However, the electron transfer kinetics and mass transfer of redox couples have not been thoroughly studied. Here, the ion reaction and charge transport in thermogalvanic cells are investigated by electrochemical impedance analysis. We first propose the detailed impedance model followed experimental verification on three types of electrode materials. Parameters including kinetic rate constants and ion diffusion coefficients for the electrodes are obtained by fitting the impedance data. Our study shows explicitly that impedance analysis can provide useful information on selecting suitable electrode materials for thermogalvanic cells.     

Kinetics and mechanism in the decomposition of NH3 in a radio-frequency pulse discharge

Studies of time-resolved absorption spectra of transient species in the decomposition of NH₃ by an r.f. pulse discharge together with product analysis showed that the major radical formed was NH at concentrations of the order of 10^–6 mol dm^–3 (10⁵ molec. cm^–3). Possible mechanisms for the formation of the radical during the discharge and its decay following pulse cut-off were tested by computer simulation of the kinetic data. Following zero-order formation with rate coefficient 0.19±0.03 mol dm^–3 s^–1, the decay was second order in NH with rate coefficient 2.1±0.5×10⁹ mol^–1 dm³ s^–1 both for pure NH₃ and where NH₃/rare gas mixtures were investigated. The kinetic data are consistent with NH removal in a nonassociative radical-radical reaction proceeding via a short-lived collision complex, probably 2NH N₂H₂ N₂ + H₂.     

Influence of the particle size distribution on the CRTA curves for the solid-state reactions of interface shrinkage type

The kinetic curves at infinite temperature for the solid-state reactions of the interface shrinkage type were drawn theoretically by taking account the particle size distribution in the sample mixture. The CRTA curves for the reactions with the particle size distribution can be drawn by utilizing the universal kinetic curves at infinite temperature. The proper kinetic treatment for the CRTA curves with the particle size distribution is discussed in connection with the property of the kinetic equation with respect to the particle size distribution. The present kinetic consideration is taken as a simulation for the reactions with a certain distribution in among the reactant particles, produced preferably by the mass and heat transfer phenomena during the thermoanalytical measurements. The merit of the rate jump method by a single cyclic CRTA curve is also discussed on the basis of the present results.     

Hydrolysis of 1,2-disubstituted imidazolines in aqueous media

The kinetics of hydrolysis of 1,2-disubstituted imidazolines in aqueous media was studied (pH 2.0—12.5, T = 25—90 °C) by UV spectroscopy. The hydrolysis products were identified. The introduction of a branched substituent into position 2 of the imidazoline ring increases the hydrolytic stability of the compounds. The effect of the pH on the hydrolysis rate of imidazolines is discussed.     

单向应力条件下松弛时间率相关的非线性粘弹性本构模型

基于单向拉伸实验研究和内变量理论 ,提出了一种新的简单的一维非线性粘弹性本构关系 .对两种粘弹性材料 ,即高密度聚乙烯和聚丙烯进行了不同加载速率作用下的拉伸实验研究 ,实验结果表明 ,两种材料的应力应变关系与加载速率相关 ;对材料的应力应变实验数据进行拟合发现 ,材料的松弛时间具有很强的应变率相关性 ,当应变率发生数量级变化时 ,材料的松弛时间也发生数量级的变化 .采用内变量理论 ,导出了在单轴应力条件下松弛时间率相关的非线性粘弹性本构关系的迭代形式 ,并给出其收敛条件 .当采取一次迭代形式时 ,本构关系退化为松弛时间率相关的Maxwell模型 .数值拟合的结果表明 ,一次迭代形式的本构关系就可以很好地拟合和预测实验结果 .     

超临界萃取装置的研制及其应用

超临界流体萃取是近的上来兴起的一种新的分离技术，报道了将超临界萃取原理与回流技术相结合研制的二氧化碳回流中低压超临界流体萃取设备，解决了关键实验手段，通过应用证明设备可靠，费用低廉，有实用价值。     

Theoretical Studies on the Abstraction Reaction of Atomic O（^3p） with Si2H6

The hydrogen abstraction reaction of O(^3P) with Si2H6 has been studied theoretially. Two transition states of ^3A″ and ^3A′ symmetries have been located for this abstraction reaction. Geometries have been optimized at the UMP2 leve with 6-311G (d) basis set. G3MP2 has been used for the final single-point energy calculation. The rate constants have been calculated over a wide temperature range of 200-3000K using canonical variational transition-state sheory (CVT) with small curvature tunneling effect(SCT). The calculated CVT/SCT rate constants match well with the experimental value.     

Influence of heating rate on kinetic quantities of solid phase thermal decomposition

Thermogravimetric analyses of thermal decomposition (pyrolysis, thermal dissociation and combustion) of 9 different samples were carried out in dynamic conditions at different heating rates. The kinetic parameters (E, A and k_m) of thermal decomposition were determined and interrelations between the parameters and heating rate q were analyzed. There were also relations between Arrhenius and Eyring equations analyzed for thermal decomposition of solid phase. It was concluded that Eyring theory is an element, which interconnects used thermokinetic equations containing Arrhenius law and suggests considering kinetic quantities in way relative to 3 kinetic constants (E, A and k_m). Analysis of quantities other than km (i.e. E, A, Δ⁺H, Δ⁺S) in relation to heating rate is an incomplete method and does not lead to unambiguous conclusions. It was ascertained that in ideal case, assuming constant values of kinetic parameters (E and A) towards heating rate and satisfying both Kissinger equations, reaction rate constant k_m should take on values intermediate between constants (k_m)₁ and (k_m)₂ determined from these equations. Whereas behavior of parameters E and A towards q were not subjected to any rule, then plotting relation k_m vs. q in the background of (k_m)₁ and (k_m)₂ made possible classification of differences between thermal decomposition processes taking place in oxidizing and oxygen-free atmosphere.     

Improving the rate of convergence of interior point methods for linear programming

This paper proposes a procedure for improving the rate of convergence of interior point methods for linear programming. If (x ^k ) is the sequence generated by an interior point method, the procedure derives an auxiliary sequence ( ). Under the suitable assumptions it is shown that the sequence ( ) converges superlinearly faster to the solution than (x ^k ). Application of the procedure to the projective and afflne scaling algorithms is discussed and some computational illustration is provided.     

Comparison of particle size and flow rate optimization for chromatography using one-monomer molecularly imprinted polymers versus traditional non-covalent molecularly imprinted polymers

The dependence of enantio-selective chromatographic performance on particle size, as measured by separation factor, was investigated for one-monomer molecularly imprinted polymers (OMNiMIPs) compared to traditionally formed EGDMA/MAA molecularly imprinted polymers (MIPs). Five particle size ranges were compared (<20 μm, 20-25 μm, 25-38 μm, 38-45 μm, and 45-63 μm), revealing that the particle sizes above 25 μm provided the highest separation factor, and thus the best enantiomer separation, for both imprinted polymers. Other chromatographic parameters such as the number of theoretical plates and resolution exhibited only minor changes for the OMNiMIPs as the particle size changed, except for particles 20 μm and below. However, the number of theoretical plates and resolution for EGDMA/MAA are higher for particles in the 20-25 μm range. Thus, chromatographic factors for the EGDMA/MAA polymers are better in this range, despite better enantioselectivity for particle sizes above 25 μm. In contrast, OMNiMIPs generally show the most favorable performance for particle sizes in the 38-45 μm range. It was also found that decreasing flow rate resulted in improved enantioselectivity for both MIPs for all particle sizes.