Asymptotic analysis of strongly nonlinear oscillators

In this paper, an asymptotic method is presented for the analysis of a class of strongly nonlinear autonomous oscillators. The equations governing the amplitude and phase factor are obtained, and the amplitude and stability of the corresponding limit cycles are determined.     

The general variational principle of the cantilever beam of circular cross section including transverse shear deformation

In this paper we derive the approximate theory on the straight cantilever beam of a same circular cross section including transverse shear deformation, using the general variational principle with two class variates, and we present the expression with two class variates containing two general displacement, of general complementary energy, corresponding with the theory.     

Simulation of Nanoparticle Production in Premixed Aerosol Flow Reactors by Interfacing Fluid Mechanics and Particle Dynamics

The interaction of fluid mechanics and particle dynamics at the very early stages of flame synthesis largely affects the characteristics of the product powder. Detailed simulations provide a better understanding of these processes, which take place in a few milliseconds, and offer the possibility to influence the product characteristics by intelligent selection of the process parameters. The present paper reports on the simulation of titania powder formation by TiCl₄ oxidation in an aerosol flow reactor. A commercially available fluid mechanics code is used for the detailed calculation of the fluid flow and the chemical reaction at non-isothermal conditions. This code is then interfaced with a model for aggregate particle dynamics neglecting the spread of the particle size distribution. The simulation shows the onset of the particle formation in the reactor and calculates the dynamic evolution of the aggregate particle size, number of primary particles per aggregate and the specific surface area throughout the reactor. The presented, newly developed calculation technique allows for the first time the simulation of particle formation processes under the authentic, complex conditions as found in actual aerosol reactors.     

半浮区液桥热毛细振荡流

采用非定常、三维直接数值模拟方法研究大Pr数半浮区液桥热毛细对流从定常流向振荡流的过渡过程．文中详细描述了热毛细振荡流的起振和振荡特征,给出了液桥横截面上振荡流的流场和温度分布．在地面引力场条件下计算的结果与地面实验的结果进行比较,得出液桥水平截面上的流场和温度分布图样以一定的速度旋转,自由表面固定点处流体的环向流速正、负交替变化的一致结论．     

含ER流体板结构的振动特性研究

本文制作了含电流变体夹层梁和模拟飞机蒙皮结构的含电流变体加筋层合板,采用响应幅频法,测试了在不同电场强度梁和层合加筋板结构各阶固有频率和振幅的变化;并着重测试了加筋层合板结构在改变板材料、电流变体作用面积等条件时各阶频响特性的变化。实验结果表明,随着电场强度的增加,夹层梁的频响特性有很大变化;而层合板的固有频率变化不大,但振幅却有显著变化,其中铝－层合加筋板的频响幅值的变化率达到５０．１％。     

红外烤漆机理及轮毂模拟烤漆实验研究

我国汽车、拖拉机及家电等行业的烤漆装机功率约为１６０万ｋＷ,能耗大、能源利用率低而质量差,工件不干亟待解决．文中阐述了红外强化烤漆的机理并利用新研制的高温定向电阻带辐射器对汽车轮毂进行了强化模拟烤漆实验研究并进行了理论计算,结果表明高温定向近距离辐射及优化布置辐射器是缩短烤漆周期、节约能源及确保烤漆质量的重要途径之一．     

考虑耦合质量影响的饱和多孔介质动力响应分析的显式有限元法

根据Biot饱和多孔介质动力方程,采用解耦技术,提出了考虑耦合质量Pd影响的饱和多孔介质中动力响应分析的显式有限元法。文中建立并推导了显式有限元的公式,编制了相应的计算程序并进行了实例计算。计算结果与解析解进行了对比,两者符合很好,表明本文方法是处理饱和多孔介质动力问题的一种有效方法。文中还分析了耦合质量ρa对固相和液相动位移的影响。     

Molecular Fluids at High Dimensionality

We extend the analysis of orientational first-order phase transitions in anisotropic molecular fluids at high spatial dimensionality to hard-disk fluids, and then to mixture of hard disks and hard spheres. The effect of hard-sphere admixture depends sensitively on the relative sizes of the two geometrical objects, and large spheres completely quench the disk transition. An introductory study is made of spatially ordered states.     

TiO2包覆石墨颗粒/硅油电流变液的研究

理论计算表明,介质包覆导体颗粒用作电流变液的分散相,可以获得高剪切应力的电流变液.采用溶胶-凝胶技术在尺度为5—10μm的石墨颗粒表面成功地包覆了TiO₂,获得了金红石相TiO₂包覆石墨的复合颗粒.配制成复合颗粒/硅油电流变液,其剪切应力与纯TiO₂/硅油电流变液相比,可提高一个数量级.当电场强度为1.7kV/mm时,复合颗粒/硅油电流变液的剪切应力可达1.25kPa,电流密度小于10μA/cm². 关键词： 电流变液 包覆 2')" href="#">TiO₂ 石墨