离子通道电子束回旋脉塞的等离子体波效应

研究了离子通道回旋电子束脉塞（ICECM）中的等离子体波非线性效应。利用流体理论与自洽非线性理论方法对ICECM中等离子体波效应的微观机理进行了分析。研究发现,等离子体波加强了电子束的纵向群聚,束-波互作用的能量交换效率及系统增益得到明显提高。数值模拟计算表明,对于中等等离子体密度、1.5kA电流和1MV加速电压的电子束,系统能够获得的脉冲功率和频率分别为200MW和280GHz的毫米波束。     

Flow and heat transfer with prescribed skin friction in a rotating fluid

This paper investigates the rotating flow and heat transfer of a viscous fluid induced by a stretching surface. The nonlinear problem subject to a given skin friction at the boundary is solved. Analytic solution is obtained using homotopy analysis method. The velocity, temperature, and stretching velocity is calculated for different values of the rotation parameter (λ). The obtained results are compared with the well known results of rotating flow induced by a stretching surface by using four sets of boundary conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

Simultaneous effects of induced magnetic field and heat and mass transfer on the peristaltic motion of second‐order fluid in a channel

In this article, we investigate the influence of heat and mass transfer on the peristaltic flow of magnetohydrodynamic second‐order fluid in a channel when the induced magnetic field effects are present. Problem formulation in a wave frame of reference is presented. The governing nonlinear analysis is carried out under the assumption of small wave number. Explicit expressions of the pressure gradient, the stream function, the magnetic force function, the axial induced magnetic field, the current density distribution, the temperature, and the concentration distribution are derived. The effects of embedded parameters are also examined. Copyright © 2011 John Wiley & Sons, Ltd.     

The efect of the couple stress parameter and Prandtl number on the transient natural convection flow over a vertical cylinder

An analysis is performed to study transient free convective boundary layer flow of a couple stress fluid over a vertical cylinder, in the absence of body couples. The solution of the time-dependent non-linear and coupled governing equations is carried out with the aid of an unconditionally stable Crank–Nicolson type of numerical scheme. Numerical results for the steady-state velocity, temperature as well as the time histories of the skin-friction coefcient and Nusselt number are presented graphically and discussed. It is seen that for all flow variables as the couple stress control parameter, Co, is amplified, the time required for reaching the temporal maximum increases but the steady-state decreases.     

A generic framework for time-stepping partial differential equations (PDEs): general linear methods,object-oriented implementation and application to fluid problems

Time-stepping algorithms and their implementations are a critical component within the solution of time-dependent partial differential equations (PDEs). In this article, we present a generic framework – both in terms of algorithms and implementations – that allows an almost seamless switch between various explicit, implicit and implicit–explicit (IMEX) time-stepping methods. We put particular emphasis on how to incorporate time-dependent boundary conditions, an issue that goes beyond classical ODE theory but which plays an important role in the time-stepping of the PDEs arising in computational fluid dynamics. Our algorithm is based upon J.C. Butcher's unifying concept of general linear methods that we have extended to accommodate the family of IMEX schemes that are often used in engineering practice. In the article, we discuss design considerations and present an object-oriented implementation. Finally, we illustrate the use of the framework by applications to a model problem as well as to more complex fluid problems.     

Melting heat transfer in the stagnation‐point flow of an upper‐convected Maxwell (UCM) fluid past a stretching sheet

The steady laminar boundary layer flow and heat transfer past a stretching sheet arre considered. Upper‐convected Maxwell (UCM) fluid is treated as a rheological model. The resulting nonlinear differential system is solved by homotopy analysis method (HAM). The influence of melting parameter (M), Prandtl number (Pr), Deborah number (β) and stretching ratio (A = a/c) on the velocity and temperature profiles is thoroughly examined. It is noticed that fields are effected appreciably with the variation of parameters. Furthermore, it is seen that the local Nusselt number is a decreasing function of melting parameter. Copyright © 2011 John Wiley & Sons, Ltd.     

Application of Supercritical fluid Extraction For Analysis of Organophosphates in Cereals

Abstract

Application of supercritical fluid extraction (SFE) utilizing pure carbon dioxide for selective isolation of organophosphates from contaminated cereals has been tested.

At the beginning of the experiments the extractability of added standards from an empty extraction vessel (thimble) and from various materials such as filter paper, sand, Celite and anhydrous sodium sulfate was tested to estimate the behavior of organophosphates. Further method development was carried out using a spiked sample of flour, which was analyzed within the proficiency testing for organophosphorus pesticides analysis (round 7) organized by Food Analysis Performance Assessment Scheme (FAPAS, MAFF-UK).

Comparison of the SFE method with a classical method currently employed for sample preparation (i.e. extraction with acetone/methanol mixture followed by gel permeation chromatographic clean up) showed advantages of the SFE technique such as simplification of the sample preparation step and thereby significant speeding up of the determination of organophosphates in cereals.     

The equation of state of the hard-disc fluid revisited

Some points about the search for analytical expressions for the equation of state of the hard-disc fluid are discussed in the light of the most recent advances in the field. New and accurate equations of state for this fluid are proposed.     

Propagation of a pre-existing turbulent fluid fracture

The propagation of rough and smooth wall pre-existing turbulent fluid fractures is investigated. The laminar fluid fracture is included as a special case for comparison. Lubrication theory is assumed to apply in the fracture and turbulence is introduced through the wall shear stress. The Perkins–Kern–Nordgren approximation is made in which the fluid pressure is proportional to the half-width of the fracture. The fracture half-width satisfies a non-linear diffusion equation. By using a linear combination of the Lie point symmetries of the non-linear diffusion equation a group invariant solution for the fracture length, volume and half-width is derived. The evolution of the length, half-width and mean flow velocity is analysed for a range of working conditions at the fracture entry. It is found that the mean flow velocity increases approximately linearly along the fracture.