A plasma-fluid model for EHD flow in DBD actuators and experimental validation

A numerical method to simulate plasma induced electrohydrodynamic flow is proposed in this study. The numerical model consists of three components. Firstly, a potential module to simulate temporal potential and electric field generated in the ionized fluid. Secondly, a plasma module to simulate plasma development and charge particle densities. Finally, a fluid module to simulate the flow affected by the body forces induced by the movement of the charged particles. Fluid flow is modeled using modified predictor-corrector strategy as proposed in the marker and cell method. The velocity field was corrected to achieve incompressible flow by calculating pressure correction factors, considered in all cells. Numerical convergence and time sensitivity analysis were carried to confirm grid independence and determine an efficient time step for simulations. Numerical computations are validated by comparing with experimental results of discharge currents and current densities. They were found to be in very good agreement thus providing an extensive validation. Furthermore, quiescent flow over a dielectric barrier discharge actuator is simulated in the this study, using the proposed plasma-fluid model, to model flow evolution and resolve temporal flow features for detailed analysis. The streamline and vorticity plots were analyzed and compared with experimental results, and flow results were found to be in-line with the experiments.     

Scattering coefficients for a sphere in a visco-acoustic medium for arbitrary partial wave order

Analytical solutions are reported for the scattering coefficients of a solid elastic sphere suspended in a viscous fluid for arbitrary partial wave order. Expressions are derived for incident compressional and shear wave modes, taking into account the viscosity of the surrounding fluid and resultant wave mode conversion. The long compressional wavelength limit is employed to simplify the derivation, whereas no restriction is placed on the shear wavelength in the fluid compared to the particle dimension. The analytical approximations are compared with numerical results obtained from matrix inversion of the boundary equations and agree within the validity domain of the solutions.     

A Runge-Kutta–based WENO reconstruction on moving mesh for compressible fluids

In this paper, we construct a high-order moving mesh method based on total variation diminishing Runge-Kutta and weighted essential nonoscillatory reconstruction for compressible fluid system. Beginning with the integral form of fluid system, we get the semidiscrete system with an arbitrary mesh velocity. We use weighted essential nonoscillatory reconstruction to get the space accuracy on moving meshes, and the time accuracy is obtained by modified Runge-Kutta method; the mesh velocity is determined by moving mesh method. One- and two-dimensional numerical examples are presented to demonstrate the efficient and accurate performance of the scheme.     

Simulating bubble dynamics in a buoyant system

Multiphase flows are critical components of many physical systems; however, numerical models of multiphase flows with large parameter gradients can be challenging. Here, two different numerical methods, volume of fluid (VOF) and smoothed particle hydrodynamics (SPH), are used to model the buoyant rise of isolated gas bubbles through quiescent fluids for a range of Bond and Reynolds numbers. The VOF is an Eulerian grid–based method, whereas the SPH is Lagrangian and mesh free. Each method has unique strengths and weaknesses, and a comparison of the two approaches as applied to multiphase phenomena has not previously been performed. The VOF and SPH simulations are compared, verified, and validated. Results using two-dimensional VOF and SPH simulations are similar to each other and are able to reproduce numerical benchmarks and experimental results for sufficiently large Morton and Reynolds numbers. It is also shown that at low Reynolds numbers, the two methods, SPH and VOF, diverge in the transient regime of the bubble rise. Regimes that require simulations capable of representing three-dimensional drag are identified as well as regimes in which results from VOF and SPH diverge.     

A modified SPH method to model the coalescence of colliding non-Newtonian liquid droplets

This paper develops a modified smoothed particle hydrodynamics (SPH) method to model the coalescence of colliding non-Newtonian liquid droplets. In the present SPH, a van der Waals (vdW) equation of state is particularly used to represent the gas-to-liquid phase transition similar to that of a real fluid. To remove the unphysical behavior of the particle clustering, also known as tensile instability, an optimized particle shifting technique is implemented in the simulations. To validate the numerical method, the formation of a Newtonian vdW droplet is first tested, and it clearly demonstrates that the tensile instability can be effectively removed. The method is then extended to simulate the head-on binary collision of vdW liquid droplets. Both Newtonian and non-Newtonian fluid flows are considered. The effect of Reynolds number on the coalescence process of droplets is analyzed. It is observed that the time up to the completion of the first oscillation period does not always increase as the Reynolds number increases. Results for the off-center binary collision of non-Newtonian vdW liquid droplets are lastly presented. All the results enrich the simulations of the droplet dynamics and deepen understandings of flow physics. Also, the present SPH is able to model the coalescence of colliding non-Newtonian liquid droplets without tensile instability.     

Fluid‐structure coupling of linear elastic model with compressible flow models

Cavitation erosion is caused in solids exposed to strong pressure waves developing in an adjacent fluid field. The knowledge of the transient distribution of stresses in the solid is important to understand the cause of damaging by comparisons with breaking points of the material. The modeling of this problem requires the coupling of the models for the fluid and the solid. For this purpose, we use a strategy based on the solution of coupled Riemann problems that has been originally developed for the coupling of 2 fluids. This concept is exemplified for the coupling of a linear elastic structure with an ideal gas. The coupling procedure relies on the solution of a nonlinear equation. Existence and uniqueness of the solution is proven. The coupling conditions are validated by means of quasi‐1D problems for which an explicit solution can be determined. For a more realistic scenario, a 2D application is considered where in a compressible single fluid, a hot gas bubble at low pressure collapses in a cold gas at high pressure near an adjacent structure.     

A cost‐effective curvature calculation approach for interfacial flows on unstructured meshes

We present a simple and cost‐effective curvature calculation approach for simulations of interfacial flows on structured and unstructured grids. The interface is defined using volume fractions, and the interface curvature is obtained as a function of the gradients of volume fractions. The gradient computation is based on a recently proposed gradient recovery method that mimicks the least squares approach without the need to solve a system of equations and is quite easy to implement on arbitrary polygonal meshes. The resulting interface curvature is used in a continuum surface force formulation within the framework of a well‐balanced finite‐volume algorithm to simulate multiphase flows dominated by surface tension. We show that the proposed curvature calculation is at least as accurate as some of the existing approaches on unstructured meshes while being straightforward to implement on any mesh topology. Numerical investigations also show that spurious currents in stationary problems that are dependent on the curvature calculation methodology are also acceptably low using the proposed approach. Studies on capillary waves and rising bubbles in viscous flows lend credence to the ability of the proposed method as an inexpensive, robust, and reasonably accurate approach for curvature calculation and numerical simulation of multiphase flows.     

Helicity and other conservation laws in perfect fluid motion

In this review paper, we discuss helicity from a geometrical point of view and see how it applies to the motion of a perfect fluid. We discuss its relation with the Hamiltonian structure, and then its extension to arbitrary space dimensions. We also comment about the existence of additional conservation laws for the Euler equation, and its unlikely integrability in Liouville's sense.     

Rapid Determination of the Antioxidant Capacity of Lettuce by an E‐Tongue Based on Flow Injection Coulometry

This work proposes the use of an electronic tongue based on flow injection coulometry for the rapid determination of the antioxidant capacity of fresh lettuce. The e‐tongue consisted of a series of 16 porous carbon electrodes, each poised at a fixed potential from +100 to +850 mV. Each injection leaded to a characteristic hydrodynamic voltammogram, whose profile reflects the composition of antioxidants. The correlation between the peak area recorded by each sensor and the 1,1‐Diphenyl‐2‐picryl‐hydrazyl (DPPH) assay was maximum ín the range of potentials between +400 and 750 mV (R2>0.97). Accordingly, the charge measured provided a direct and simple index of the antioxidant capacity. The practical utility of such index was initially demonstrated by determining the best extraction conditions. This consisted in freeze‐drying of lettuce followed by methanolic extraction. Later, the e‐tongue was used to evaluate the effect of storage (one week at 5 °C) on lettuce. The e‐tongue revealed that lettuce lost up to 25 % of their initial antioxidant activity during storage. However, when lettuce samples were pre‐treated with fast cooling or vacuum cooling, the decrease of the antioxidant index was limited to 14 and 15 %. Overall, the e‐tongue is a rapid, simple and sensitive method for the determination of the antioxidant capacity of fresh lettuce samples. Indirectly, these findings suggest also that lettuce may serve as potential dietary sources of natural phenolic antioxidants.     

Hall coefficient in solution for a simple dynamical model

A model Liouville equation is proposed for a system composed of an ion moving in a solvent fluid. Using this model, explicit results are obtained for the Ohmic conductivityL and the Hall conductivityh. These results are then used to calculate the Hall coefficientR = ehL^–2, which is a measure of the effect of non-Brownian motion, for several charge carriers of interest. Our results are in agreement with earlier findings based on a stochastic model which predictR > 1 for H⁺(aq). Our results also indicate thatR 1 for charge carriers such as Na⁺, Cl^–, and K⁺ which have a mass greater than that of a solvent molecule (here taken as 18 amu).This research was supported in part by grants from the National Science Foundation and by the Research Foundation of the State University of New York.