铂胶体粒子的形貌控制研究

在含有草酸根稳定剂的水溶液中,以氢气还原K_2[Pt(C_2O_4)_2], K_2PtCl_6以及K_2PtCl_4制备形状不同的Pt胶体粒子,其平均尺寸分别为6.5, 3. 5和7.9nm。UV-vis和电镜研究结果表明,还原速度,Pt纳米粒子的尺寸和形状分布 均与所用前体有关。以K_2[Pt(C_2O_4)_2]为前体制备的Pt胶体粒子具有很窄的尺 寸和形状分布,立方形粒子所占比例为93%。以K_2PtCl_4或K_2PtCl_6为前体制备 的Pt胶体粒子的形状分布较宽。草酸根稳定的Pt胶体在空气中放置时,Pt胶体粒子 催化草酸根氧化分解,使得胶体溶液中草酸根浓度降低,Pt胶体粒子形成线状聚集 体,氢气处理后,线状聚集体转化为Pt金属纳米线。     

液相微波介电加热法制备纳米粒子的研究进展

随着纳米科技的飞速发展,合成纳米材料的新方法层出不穷。在这些新方法当中,液相微波介电加热法近年来得到了飞速的发展,引起了科学界越来越多的关注。本文介绍了近年来液相微波介电加热法制备纳米粒子的一些研究进展,主要是该方法在制备金属、过渡金属氧化物和金属硫族化合物纳米粒子中的应用,并且对该领域未来的发展作了一些展望。     

量子点双标记的Fe3O4@Au磁性纳米DNA电致发光型传感器

合成了Fe3O4@Au磁性纳米粒子,并根据单链寡聚核苷酸(ss-DNA)杂交原理,利用量子点电化学发光,构建了DNA电化学传感器.在磁控玻碳电极(MCGCE)表面,将5′-SH-ssDNA捕获探针自组装在Fe3O4@Au磁性纳米粒子上,然后与目标DNA互补的一端杂交形成dsDNA,再与双标记了量子点的5′-NH2-ssDNA-NH2-3′信号探针杂交形成三明治杂交的DNA.应用循环伏安法对DNA的固定与杂交进行了表征.目标DNA浓度在1.0×10-13～1.0×10-11 mol/L范围与其响应的ECL信号呈线性关系,检出限为1.8×10-14mol/L.由于采用量子点双标记法,检测的灵敏度显著提高.     

聚甲基丙烯酸单层修饰金纳米粒子的制备及pH响应性催化

采用可逆加成断裂链转移(RAFT)聚合制备了具有硫醇端基的聚甲基丙烯酸叔丁酯(PtBMA),通过其水解得到具有pH刺激响应的聚甲基丙烯酸(PMAA)。利用硫醇端基与金之间的强耦合作用获得了聚甲基丙烯酸单层修饰的金纳米粒子(PMAA-GNPs)催化体系。利用UV-Vis光谱和透射电子显微镜(TEM)研究了PMAA-GNPs催化剂在不同pH值下的分散状态。以NaBH4还原对硝基苯酚的反应,验证了此催化体系的pH响应性。结果表明,调节体系的pH值为酸性,PMAA塌缩和包覆在金纳米粒子(GNPs)的表面,引起GNPs的聚集,从而降低了催化效率。反之,在碱性环境中,在PMAA链的排斥作用下,GNPs能较好的分散,提高催化效率。     

Fast synthesis of dopamine-coated Fe3O4 nanoparticles through ligand-exchange method

A fast approach was described for the synthesis of water-dispersible monodisperse dopamine-coated Fe₃O₄ nanoparticles（DA-Fe₃O₄） with uniform size and shape via ligand-exchange of oleic acid on Fe₃O₄ using only 2 min.The prepared DA-Fe₃O₄ nanoparticles were characterized by transmission electron microscopy,Fourier transform infrared spectrometry,and vibrating sample magnetometer.The results indicated that the resulting DA-Fe₃O₄ nanoparticles had an average diameter of about 19.2 nm. The magnetic saturation value of the prepared DA-Fe₃O₄ nanoparticles was determined to be 72.87 emu/g,which indicating a well-established superparamagnetic property.     

金纳米粒子组装结构中的表面重组现象

以纳米粒子为基本结构单元构筑的各种二维或三维超晶格结构受到了广泛的重视［１］．人们的兴趣一方面来源于在纳米尺度上控制材料结构 ,另一方面则因为组织化的纳米材料或结构具有独特的性质 ,以期在非线性光学、纳米电子学等前沿领域得到应用［２］．当前研究最多的结构形式是固体表面上的纳米粒子阵列或单层薄膜 ,通常是胶体粒子靠某种特殊相互作用吸附或沉积在固体表面上（亦称为“纳米粒子在表面上的组装［３］”） ,因此对纳米粒子及固体表面进行功能化的修饰 ,从而控制纳米粒子在表面上的排列和聚集状态 ,是制备这类复合结构的核心问…     

利用DPN技术直接构建磁性纳米图形

在纳米尺度下构建有序的磁性模板和图形是当前的研究热点之一 [1,2 ] .这种模板在生物样品的分离[1] 、磁电子学研究和信息存储 [2 ] 等领域具有重要意义 .目前 ,光刻 [3] 、微触点印刷 [4 ] 和自组装 [5] 等多项技术已被用来构建各种纳米模板 .1 999年 ,美国西北大学 Mirkin小组 [6 ]发明的 Dip- pen纳米刻蚀技术 (简称 DPN技术 )更在可控组装方面显示出巨大优越性 .这项技术是在一定驱动力作用下 ,使吸附在原子力显微镜 ( AFM)针尖上的分子“墨水”逐渐转移到基底表面上 ,实现纳米模板的可控构建 .与传统技术相比 ,DPN技术可在纳米尺…     

Metallic Particles from Complexing Microcapsules Dispersed in a Silica Gel

A new process to control the distribution of metal nanoparticles is proposed. It involves the use of complexing microcapsules obtained by interfacial polycondensation. The latter are hollow spheres constituted of a polymer membrane, containing an insoluble active ingredient, such as a polyacrylic acid, which can complex Co²⁺ ions. These capsules are dispersed in a silica sol followed by thermal treatments and reduction under H₂ which results in metallic Co nanoparticles confined in the capsules domains. The particles do not diffuse in the matrix.     

The partial hydrogenation of benzene to cyclohexene by nanoscale ruthenium catalysts in imidazolium ionic liquids

The controlled decomposition of an Ru(0) organometallic precursor dispersed in 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)), tetrafluoroborate (BMI.BF(4)) or trifluoromethane sulfonate (BMI.CF(3)SO(3)) ionic liquids with H(2) represents a simple and efficient method for the generation of Ru(0) nanoparticles. TEM analysis of these nanoparticles shows the formation of superstructures with diameters of approximately 57 nm that contain dispersed Ru(0) nanoparticles with diameters of 2.6+/-0.4 nm. These nanoparticles dispersed in the ionic liquids are efficient multiphase catalysts for the hydrogenation of alkenes and benzene under mild reaction conditions (4 atm, 75 degrees C). The ternary diagram (benzene/cyclohexene/BMI.PF(6)) indicated a maximum of 1 % cyclohexene concentration in BMI.PF(6), which is attained with 4 % benzene in the ionic phase. This solubility difference in the ionic liquid can be used for the extraction of cyclohexene during benzene hydrogenation by Ru catalysts suspended in BMI.PF(6). Selectivities of up to 39 % in cyclohexene can be attained at very low benzene conversion. Although the maximum yield of 2 % in cyclohexene is too low for technical applications, it represents a rare example of partial hydrogenation of benzene by soluble transition-metal nanoparticles.     

Preparation,stability and two-dimensional ordered arrangement of gold nanoparticles capped by surfactants with different chain lengths

Gold nanoparticles modified with C10NH2, C12NH2, C16NH2 and C18NH2 respectively have been prepared by the reverse micelle method. Nanoparticles stability and their two-dimensional (2D) ordered arrangement were studied by UV-Vis absorption spectra and LB technique. The factors, such as the chain length and the size distribution of particles, which affect the 2D ordered arrangement formation, are discussed. Experimental results show that the longer the chain length of surfactants capping the gold nanoparticles, the more stable the nanoparticles, and the more ordered 2D arrangement of gold nanoparticles.