Measuring particle size-dependent physicochemical structure in airborne single walled carbon nanotube agglomerates

As-produced single-walled carbon nanotube (SWCNT) material is a complex matrix of carbon nanotubes, bundles of nanotubes (nanoropes), non-tubular carbon and metal catalyst nanoparticles. The pulmonary toxicity of material released during manufacture and handling will depend on the partitioning and arrangement of these components within airborne particles. To probe the physicochemical structure of airborne SWCNT aggregates, a new technique was developed and applied to aerosolized as-produced material. Differential Mobility Analysis-classified aggregates were analyzed using an Aerosol Particle Mass Monitor, and a structural parameter Γ (proportional to the square of particle mobility diameter, divided by APM voltage) derived. Using information on the constituent components of the SWCNT, modal values of Γ were estimated for specific particle compositions and structures, and compared against measured values. Measured modal values of Γ for 150 nm mobility diameter aggregates suggested they were primarily composed of non-tubular carbon from one batch of material, and thin nanoropes from a second batch of material – these findings were confirmed using Transmission Electron Microscopy. Measured modal values of Γ for 31 nm mobility diameter aggregates indicated that they were comprised predominantly of thin carbon nanoropes with associated nanometer-diameter metal catalyst particles; there was no indication that either catalyst particles or non-tubular carbon particles were being preferentially released into the air. These results indicate that the physicochemistry of aerosol particles released while handling as-produced SWCNT may vary significantly by particle size and production batch, and that evaluations of potential health hazards need to account for this. Disclaimer: The mention of any company or product does not constitute an endorsement by the Centers for Disease Control and Prevention. The findings and conclusions in this paper are those of the authors and do not necessarily represent the views of the National Institute for Occupational Safety and Health.     

Reduced-temperature ordering of FePt nanoparticle assembled films by Fe30Pt70/Fe3O4 core/shell structure

In this paper, Fe30Pt70/Fe3O4 core/shell nanoparticles were synthesized by chemical routine and the layered polyethylenimine （PEI）-Fe30Pt70/Fe3O4 structure was constructed by molecule-mediated self-assembly technique. The dimension of core/shell structured nanoparticles was that of 4nm core and 2 nm shell. After annealing under a flow of forming gas （50%Ar2＋30%H2） for 1 h at or above 400℃, the iron oxide shell was reduced to Fe and diffused to Pt-rieh core, which leaded to the formation of L1. phase FePt at low temperature. The x-ray diffraction results and magnetic properties measurement showed that the chemical ordering temperature of Fe30Pt70/Fe3O4 core/shell nanoparticles assembly can be reduced to as low as 400℃. The sample annealed at 400℃ showed the eoereivity of 4KOe with the applied field of 1.5T. The core/shell structure was suggested to be an effective way to reduce the ordering temperature obviously.[第一段]     

Tunable light emission and decaying process of photoluminescence from a nanostructured Si-in-SiNx film

Strong photoluminescence (PL) covering the green-violet band was measured at room temperature in an as-deposited amorphous Si-in-SiN_x film, which was prepared by plasma-enhanced chemical vapor deposition on cold (below 60 °C) Si(1 0 0) wafer. With an increase in photon energy of excitation, the PL shifts its peak position from 510 to 416 nm at yet-comparable intensities, thus allowing an energy-selected excitation in practical application. Also, a time-resolved analysis was performed for the emissions at various wavelengths, which showed a decay time shorter than 1.0 ns. These results indicate that the nanostructured Si-in-SiN_x can be a promising candidate material for the fabrication of silicon-based optical interconnections and switches.     

Poly(N‐vinyl imidazole) grafted silica nanofillers: Synthesis by RAFT polymerization and nanocomposites with polybenzimidazole

In this report, we synthesized poly(N‐vinyl imidazole) (PNVI) grafted silica nanoparticles (SiNP) by using RAFT polymerization through grafting‐from approach to demonstrate that the self‐assembled structure of SiNP is the key diving force in improving physical properties of SiNP based nanocomposites. In a multistep synthetic process, well‐defined PNVI chains with tunable molecular weights and surface chain densities were grown from the RAFT agent anchored SiNP surface using N‐vinyl imidazole (NVI) as a monomer. Spectroscopic and thermal analysis confirmed surface grafting of PNVI on SiNP surface and the amount of grafted PNVI chins were also quantified. The mean diameter of the PNVI grafted SiNP (PNVI‐g‐SiNP) particles altered between 50 and 100 nm with the variation of PNVI chain lengths. The present approach is metal‐catalyst free, straight forward, and provides PNVI functionalized SiNP in a simple manner in comparison to the reported methods. Further, these PNVI‐g‐SiNP particles were used as a nanofiller to prepare nanocomposites with Poly(4,4′‐diphenylether‐5,5′‐bibenzimidazole) (OPBI). These nanocomposites displayed significantly higher mechanical, proton conductivity and less acid leaching properties than the pristine OPBI. The anisotropic self‐assembled ordered structure formation of nanofillers in the nanocomposites believed to be the driving force for the enhanced physical properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 365–375     

Chemical analysis of size-tailored magnetic colloids using slurry nebulization in ICP-OES

In this work, inductively coupled plasma emission spectroscopy was utilized to directly determine the chemical composition of magnetic fluids constituted of size-sorted ferrite nanoparticles in aqueous solution. Nickel and cobalt nanoferrites were chemically synthesized following a bottom-up route and dispersed under various pH conditions. Size and structural characteristics of nanograins were investigated by X-ray diffraction using a synchrotron source. Chemical analysis was then carried out by directly introducing diluted magnetic fluid samples (slurries) into the spectrometer. To achieve reliable measurements, sample conditions and apparatus parameters were carefully investigated. Slurry stability must be optimized in order to obtain reproducible and accurate analysis. The instrument must also be calibrated to minimize the difference between the signal produced by slurries and that of aqueous ordinary solutions. Furthermore, slurry sample introduction offers many advantages over conventional sample digestion, including reduced sample pretreatment time, less possibility of contamination and the use of direct calibration with aqueous solutions.     

Novel superhydrophobic silica/poly(siloxane‐fluoroacrylate) hybrid nanoparticles prepared via surface‐initiated ATRP and their surface properties: The effects of polymerization conditions

A series of superhydrophobic poly(methacryloxypropyltrimethoxysilane, MPTS‐b‐2,‐2,3,3,4,4,4‐heptafluorobutyl methacrylate, HFBMA)‐grafted silica hybrid nanoparticles (SiO₂/PMPTS‐b‐PHFBMA) were prepared by two‐step surface‐initiated atom transfer radical polymerization (SI‐ATRP). Under the adopted polymerization conditions in our previous work, the superhydrophobic property was found to depend on the SI‐ATRP conditions of HFBMA. As a series of work, in this present study, the effects of polymerization conditions, such as the initiator concentration, the molar ratio of monomer and initiator, and the polymerization temperature on the SI‐ATRP kinetics and the interrelation between the kinetics and the surface properties of the nanoparticles were investigated. The results showed that the SI‐ATRP of HFBMA was well controlled. The results also showed that both the surface microphase separation and roughness of the hybrid nanoparticles could be strengthened with the increase of the molecular weight of polymer‐grafted silica hybrid nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010