Effect of silver addition on the formation and deposition of titania nanoparticles produced by liquid flame spray

In this study, liquid flame spray (LFS) was used to produce titania, silver and silver–titania deposits of nanoparticles. Titanium(IV)ethoxide (TEOT) and silver nitrate in ethanol solutions were used as precursors and sprayed into turbulent hydrogen–oxygen flame. Production rates of 1.5–40 mg/min of titania were used with silver additions of 1, 2, 4, and 8 wt% compared to titania. Nanoparticle deposits were collected by thermophoretic sampling at six different axial distances from the flame torch head: 3, 5, 10, 12, 15, and 20 cm, of which the all but the last one occurred inside the flame. The deposit samples were analysed by TEM and SAED analysis. The powder samples of the particles were also collected by electric precipitator to XPS and specific surface area analysis. Particle size and effective density after the flame in the aerosol were analysed with SMPS and ELPI. The results from the previous studies i.e. controlling the particle size by setting the production rates of the particles were seen to apply also for this binary system. Characterisation of the deposits showed that when the substrate is inserted into the flame, in the beginning of the flame the deposit is formed by gas phase deposition whereas further down the flame the particles are first formed in the gas phase and then deposited. The location of the transition from gas phase deposition to gas phase nucleation prior to deposition depends on chemical/physical properties (e.g. thermodynamics and gas phase interactions) of the precursor, precursor concentration in the flame and also flame temperature profile. Therefore, the deposit collection distance from the burner also affected the collected particle size and degree of agglomeration. The two component deposits were produced in two different ways: one-step method mixing both precursors in the same solute, and two-step method spraying each precursor separately. The particle morphology differs between these two cases. In one-step method the primary (d _TEM) and agglomerate particle size (d _SMPS) decreased with the amount of silver addition, verifying the fact that when present, the silver has a clear effect on the titania nanoparticle formation and growth.     

Electron microscopic study of chain aggregates of MoO<Subscript>3</Subscript> nanoparticles

Chain aggregates of MoO₃ nanoparticles have been obtained and their polymer-like properties revealed. Chain aggregates of MoO₃ nanoparticles, like polymers, form parallel packings, coils and exhibit coil-helix transition, Brownian motion, and high flexibility.     

Optical and photoelectron spectroscopic studies of alkyl-passivated silicon nanoparticles

We have performed the optical and photoelectron spectroscopic studies of alkyl-passivated Si nanoparticles synthesized by a solution route. The alkyl-passivated Si nanoparticle with mean diameter less than about 2 nm exhibits a strong ultraviolet-blue photoluminescence. Furthermore, we have directly investigated their electronic structures in the vicinity of Fermi level by means of valence-band photoemission measurements using synchrotron radiation. From these results, the detailed optical properties and electronic structures of alkyl-passivated Si nanoparticles are discussed.     

Nickel nanostructured materials from liquid phase photodeposition

Liquid Phase Photo-Deposition (LPPD) technique has been used to obtain both colloidal particles and thin films of metallic and chloride nickel from solutions of only precursor Ni(acac)₂ (acac=2,4-pentandionato). Metallic nickel was obtained from ethanol solutions by direct nickel(II) photoreduction at 254 nm and by acetone sensitised reaction at 300 nm. In this latter process the rate was higher than in the first one. NiCl₂ was formed from CCl₄ solution by a solvent-initiated reaction. TEM analysis, performed on colloidal particles of nickel, showed that their dimensions are in the range 2–4 nm. The films did not present carbon contamination and were characterized by AFM, XPS and GIXRD. Metallic films consisted of particles of 20–40 nm that are the result of the aggregation of smaller crystallites (4–5 nm). Larger agglomerations (around 200 nm) have been observed for NiCl₂ films.     

Temperature dependent magnetic spin and orbital moments of mass-filtered cobalt clusters on Au(111)

Mass-filtered cobalt clusters with a size of 8 nm have been deposited in-situ under soft-landing conditions onto Au(111). The spin and orbital moments of the Co nanoparticles on a Au (111) single crystal have been investigated as a function of the temperature using the element-specific method of X-ray magnetic circular dichroism in photoabsorption. The results hint at an temperature-dependent spin-reorientation transition which is discussed with respect to different contribution to the magnetic anisotropy. Furthermore, by means of an in-situ oxidation experiment, the influence of an exposure to oxygen on the properties of the cobalt clusters has been investigated.     

Highly stable Ag nanoparticles in agar-agar matrix as inorganic–organic hybrid

A novel synthesis of inorganic–organic hybrid films containing well dispersed and almost uniform size Ag nanoparticles in agar-agar matrix has been reported. The films are found to be highly stable for more than a year. The colloidal particles of Ag can be obtained in large quantities in the form of a film or in the gel form when dispersed in agar-agar or by dissolving in a suitable solvent as solution. Characterization has been done by UV–visible spectroscopy and TEM. The hybrid may be of interest to study third-order non-linear susceptibility.     

Competitive adsorption of polymers on metal nanoparticles

We investigate the effect of system properties and adsorption sequence on competitive adsorption of poly(methyl methacrylate) (PMMA) and polystyrene (PS) on narrowly polydispersed cobalt (Co) nanoparticles (D ∼ 27 nm). The adsorbed layer composition is studied using thermo-gravimetric analysis (TGA). We find that adsorbed layers of PS are completely displaced by PMMA when the solvent is a common good solvent. An adsorbed layer of only PMMA is also obtained through competitive adsorption from a common good solvent. However, in a selective solvent that is poor for PS, sequential adsorption leads to the formation of mixed layers.     

Localized surface plasmon resonance of silicon compounds adsorbed on silver nanoparticles

A simple method to produce silver nanoparticles on a glass surface from silver nanolayer deposited by magnetron sputtering and thermal annealed is presented. Localized surface plasmon resonance of nanoparticles shows a red shift depending on the silver nanolayer thickness, the refractive index and the thickness of an ultra-thin silicon compound adsorbed on the surface. A highly enhanced Raman spectrum of the characteristic groups of a silicon compound adsorbed on the nanoparticles surface was obtained.     

Structural and electronic properties of V, Nb and Ta nanoclusters by tight-binding molecular dynamics simulations

We present tight-binding molecular dynamics (TBMD) calculations on V, Nb and Ta nanoclusters with N = 15, 65, 175 and 369 atoms. We found that rhombic dodecahedra are energetically favoured over rhombic hexahedra and icosahedra, with V forming the most compact cluster with the gyration radius increasing with the cluster size. In addition, from the calculated electronic density of states we found that the cluster size plays an important role in the HOMO-LUMO gap and that an increase in cluster size results in enhancement of the electronic density around the Fermi level. Furthermore, we found that the small clusters (N = 15, 65) exhibit energy gap that persists even at 900 K. These findings originate from charge transfer occurring between the inner and outer cluster atoms; interestingly, we found that in the small N = 15, 65 clusters electronic charge accumulates at each surface site at the expense of the inner cluster atoms, while in the larger clusters, N = 175 and 369, charge is gathered on the central particles of the cluster, suggesting different sub-surface character of the clusters. These findings are in agreement with available experimental and theoretical data and promise to offer important information for creating nanostructured materials with improved properties suitable for multiple technological applications.     

Investigation of metal nanoparticles produced by laser ablation and their catalytic activity

Polydiphenylsilylenemethylene (PDPhSM) thin films, which are difficult to fabricate by conventional methods because of their insolubility and high melting point, have been synthesized by using laser-ablated metal nanoparticles for the thermal ring-opening polymerization of 1,1,3,3-tetraphenyl-1,3-disilacyclobutane (TPDC) in this paper. TPDC was first evaporated on silicon substrates and then exposed to metal (Pt, Cu and Ag) nanoparticles deposition by laser ablation prior to heat treatment. The catalytic activity of Pt, Cu and Ag nanoparticles has been studied. The results showed that the mean diameter of Pt nanoparticles was the smallest, Cu nanoparticles the moderate and Ag nanoparticles the biggest, while the polymerization efficiency for Pt nanoparticles was the highest, Cu nanoparticles the moderate and Ag nanoparticles the lowest. In addition, the penetration behaviours of Pt, Cu and Ag nanoparticles into the TPDC monomer films during laser ablation were different due to the particle size or the chemical interaction between metal nanoparticles and TPDC molecules.