Hydrothermal synthesis and magnetic properties of CuSb<Subscript>2</Subscript>O<Subscript>6</Subscript> nanoparticles and nanorods

Nanoparticles and nanorods of CuSb₂O₆ are prepared by hydrothermal method and its high temperature α-phase is stabilized at room temperature. The average size of the nanoparticles is ca. 13.7 nm. The nanorods, with a width of ca. 20 nm and an aspect ratio of ca. 5, are the agglomerates composing of smaller nanoparticles with an average size of ca. 8.3 nm. Compared with the high temperature α-phase of bulk sample at 400 K, the lattice of nanophases elongated in ab plane and compressed along c direction. The CuSb₂O₆ nanoparticles exhibit predominant paramagnetic phenomenon. The difference in magnetic properties of the nanoparticles and nanorods indicates the interfacial interaction of agglomerated nanoparticles.     

Optimized 3D structures and energy bands of peanut-shaped C60 polymers

Optimized three-dimensional (3D) cell structures and energy bands of fused (peanut-shaped) C₆₀ polymers (p55 and p66) have been investigated using the first-principles pseudopotential approach within the local density approximation of the density functional theory. We found that the resulting electronic structure is either metal or semiconductor depending on the shape of the polymer chains and the unit cell structure.     

Silver oligomer and single fullerene electronic properties revealed by a scanning tunnelling microscope

Clusters on surfaces have been investigated with low-temperature scanning tunnelling microscopy and spectroscopy. Constant current spectra acquired on Ag oligomers and one-dimensional chains on a Ag(111) reveal a single resonance peak whose energy shifts towards the Fermi level with increasing cluster size. Next, controlled and reproducible contact between a STM tip and a C₆₀ molecule adsorbed on Cu(100) is reported. The transition from tunnelling to contact is discussed in terms of local heating of the tip-molecule junction.     

Characterization of SiC and Si<Subscript>3</Subscript>N<Subscript>4</Subscript> nanoparticles and their aqueous dispersions

Nanoparticles of SiC and Si₃N₄ were previously used to obtain electroless NiP/particles nanocomposites. The incorporation process was very different, depending on the particle: SiC tended to agglomerate and had a high incorporation level; Si₃N₄ particles were not aggregated, but their incorporation level was very low. To try to explain these differences, the particles and their aqueous dispersions were characterized. Although the as-received products were both oxidized and of the identical mean size, results showed that the size distributions and the surface oxidation products were rather different. The zeta potential in water dispersions was similar and negative for both particles but, as the electrolyte ions were introduced, it showed a different evolution: nitride particles retained a small negative charge and carbide was almost uncharged. The overall results obtained in this study explain the different behavior of both ceramic particles and provide possible solutions to improve their co-deposition with nickel.     

Effect of silver addition on the formation and deposition of titania nanoparticles produced by liquid flame spray

In this study, liquid flame spray (LFS) was used to produce titania, silver and silver–titania deposits of nanoparticles. Titanium(IV)ethoxide (TEOT) and silver nitrate in ethanol solutions were used as precursors and sprayed into turbulent hydrogen–oxygen flame. Production rates of 1.5–40 mg/min of titania were used with silver additions of 1, 2, 4, and 8 wt% compared to titania. Nanoparticle deposits were collected by thermophoretic sampling at six different axial distances from the flame torch head: 3, 5, 10, 12, 15, and 20 cm, of which the all but the last one occurred inside the flame. The deposit samples were analysed by TEM and SAED analysis. The powder samples of the particles were also collected by electric precipitator to XPS and specific surface area analysis. Particle size and effective density after the flame in the aerosol were analysed with SMPS and ELPI. The results from the previous studies i.e. controlling the particle size by setting the production rates of the particles were seen to apply also for this binary system. Characterisation of the deposits showed that when the substrate is inserted into the flame, in the beginning of the flame the deposit is formed by gas phase deposition whereas further down the flame the particles are first formed in the gas phase and then deposited. The location of the transition from gas phase deposition to gas phase nucleation prior to deposition depends on chemical/physical properties (e.g. thermodynamics and gas phase interactions) of the precursor, precursor concentration in the flame and also flame temperature profile. Therefore, the deposit collection distance from the burner also affected the collected particle size and degree of agglomeration. The two component deposits were produced in two different ways: one-step method mixing both precursors in the same solute, and two-step method spraying each precursor separately. The particle morphology differs between these two cases. In one-step method the primary (d _TEM) and agglomerate particle size (d _SMPS) decreased with the amount of silver addition, verifying the fact that when present, the silver has a clear effect on the titania nanoparticle formation and growth.     

Electron microscopic study of chain aggregates of MoO<Subscript>3</Subscript> nanoparticles

Chain aggregates of MoO₃ nanoparticles have been obtained and their polymer-like properties revealed. Chain aggregates of MoO₃ nanoparticles, like polymers, form parallel packings, coils and exhibit coil-helix transition, Brownian motion, and high flexibility.     

Optical and photoelectron spectroscopic studies of alkyl-passivated silicon nanoparticles

We have performed the optical and photoelectron spectroscopic studies of alkyl-passivated Si nanoparticles synthesized by a solution route. The alkyl-passivated Si nanoparticle with mean diameter less than about 2 nm exhibits a strong ultraviolet-blue photoluminescence. Furthermore, we have directly investigated their electronic structures in the vicinity of Fermi level by means of valence-band photoemission measurements using synchrotron radiation. From these results, the detailed optical properties and electronic structures of alkyl-passivated Si nanoparticles are discussed.     

Nickel nanostructured materials from liquid phase photodeposition

Liquid Phase Photo-Deposition (LPPD) technique has been used to obtain both colloidal particles and thin films of metallic and chloride nickel from solutions of only precursor Ni(acac)₂ (acac=2,4-pentandionato). Metallic nickel was obtained from ethanol solutions by direct nickel(II) photoreduction at 254 nm and by acetone sensitised reaction at 300 nm. In this latter process the rate was higher than in the first one. NiCl₂ was formed from CCl₄ solution by a solvent-initiated reaction. TEM analysis, performed on colloidal particles of nickel, showed that their dimensions are in the range 2–4 nm. The films did not present carbon contamination and were characterized by AFM, XPS and GIXRD. Metallic films consisted of particles of 20–40 nm that are the result of the aggregation of smaller crystallites (4–5 nm). Larger agglomerations (around 200 nm) have been observed for NiCl₂ films.     

Temperature dependent magnetic spin and orbital moments of mass-filtered cobalt clusters on Au(111)

Mass-filtered cobalt clusters with a size of 8 nm have been deposited in-situ under soft-landing conditions onto Au(111). The spin and orbital moments of the Co nanoparticles on a Au (111) single crystal have been investigated as a function of the temperature using the element-specific method of X-ray magnetic circular dichroism in photoabsorption. The results hint at an temperature-dependent spin-reorientation transition which is discussed with respect to different contribution to the magnetic anisotropy. Furthermore, by means of an in-situ oxidation experiment, the influence of an exposure to oxygen on the properties of the cobalt clusters has been investigated.     

Highly stable Ag nanoparticles in agar-agar matrix as inorganic–organic hybrid

A novel synthesis of inorganic–organic hybrid films containing well dispersed and almost uniform size Ag nanoparticles in agar-agar matrix has been reported. The films are found to be highly stable for more than a year. The colloidal particles of Ag can be obtained in large quantities in the form of a film or in the gel form when dispersed in agar-agar or by dissolving in a suitable solvent as solution. Characterization has been done by UV–visible spectroscopy and TEM. The hybrid may be of interest to study third-order non-linear susceptibility.