强激光装置中玻璃疵病在线检测的光学系统设计

介绍了一种用于玻璃疵病在线检测的近摄工作距成像光学系统,其光组结构形式采用了光阑后置的准远心结构形式,主要光学参量为f′=14 mm;在物像距为250 mm约束条件下,物方视场达到90 mm（对角线）;F/number=3.56;光谱适应范围为400~800 nm,对应的空间分辨率为100 lp/mm时,调制传递函数大于0.29.     

基于贝叶斯序贯方法的微波效应实验设计

提出了一种基于贝叶斯验后概率的序贯检验方法,建立了检验的判别准则,给出了判别准则临界值的计算方法。在给定截尾实验次数的条件下,提出了一种截尾方案,建立了截尾判断方法。将其用于解决验证效应物在微波作用下失效概率达到给定水平的微波效应实验设计问题,给出了相应的实验方案和所需样本量的估计。最后,通过实例对上述方法的应用过程进行了说明,并和现有方法进行了分析比较。     

Index for vehicle acoustical comfort inside a passenger car

Sound quality is among the main factors that influence customers’ preference for choosing good automobile products. It all started more than 10 years ago and grows up so fast due to high competition in the automotive industries. A-weighted noise levels and sound power are usually utilised to measure the noise but they are not adequate to characterise the impact sound inside a car. The most popular approach to determine sound quality of a product is to define an annoyance or specific index, which involves both subjective and objective evaluations. Subjective and objective tests should be studied concurrently in order to determine the sound quality inside a passenger car. This approach is used in this paper to evaluate vehicle comfort index according to most frequently used sound quality metrics, namely; Zwicker loudness, sharpness, roughness and fluctuation strength. As a result researchers of different fields of automotive acoustics investigations can use this index according to the type of road (international road roughness) without any need to perform time-consuming jury tests. The metrics are correlated with jury test results that show which of them and how much has affected the acoustical comfort of the vehicle. The relation between road roughness and vehicle acoustical comfort index is another point of interest in this research.     

多光轴光学系统光轴平行度野外试验方法

基于激光测距的基本原理及激光能量分布情况，利用测距的方法进行对角度的测量，在野外全系统工作状态下，实现了多光轴系统平行度的测试，并对该方法的测试精度进行了分析。     

BEPCII新加速管的高功率测试和老练

BEPCⅡ(北京正负电子对撞机重大改进工程)要求其直线注入器提供更高的能量和流强,为此必须改进正电子产生靶前后的加速管,以提高加速梯度,并消除原有加速管因长期运行后性能有所下降的隐患.本文叙述了新加速管的高功率测试,包括测试装置的设计、建立,微波功率源(速调管)的调试和加速管高功率测试结果及其分析.     

大空间三向组合平板网架研究

利用中心节点、交叉梁、三角形拉杆和空心板所构成承力单元的组合以及内部支承柱的自由布置,本文提出了一种新型大空间三向组合平板网架结构。相关的TDGS分析系统针对原型试验取得了较好的模拟效果。通过引入柱的局部影响区域这一全新概念,系统总结了加入内部支承柱前后网架结构的内力和变形规律,进而为进一步的工程应用提供了可行性建议。     

Amperometric biosensor based on reductive H2O2 detection using pentacyanoferrate-bound polymer for creatinine determination

Pentacyanoferrate-bound poly(1-vinylimidazole) (PVI[Fe(CN)₅]) was selected as a mediator for amperometric creatinine determination based on the reductive H₂O₂ detection. Creatinine amidohydrolase (CNH), creatine amidohydrolase (CRH), sarcosine oxidase (SOD), peroxidase (POD), and PVI[Fe(CN)₅] were crosslinked with poly(ethylene glycol) diglycidyl ether (PEGDGE) on a glassy carbon (GC) electrode for a creatinine biosensor fabrication. Reduction current was monitored at −0.1 V in the presence of creatinine and O₂. It is revealed that PVI[Fe(CN)₅] is suitable as a mediator for a bioelectrocatalytic reaction of POD, since PVI[Fe(CN)₅] neither reacts with reactants nor works as an electron acceptor of SOD. The amounts of PVI[Fe(CN)₅], PEGDGE, and enzymes were optimized toward creatinine detection. Nafion as a protecting film successfully prevented the enzyme layer from interferences. The detection limit and linear range in creatinine determination were 12 μM and 12–500 μM (R² = 0.993), respectively, and the sensitivity was 11 mA cm⁻² M⁻¹, which is applicable for urine creatinine tests. The results of the creatinine determination for four urine samples measured with this proposed method were compared with Jaffe method, and a good correlation was obtained between the results.     

A novel turn-on fluorescent probe for Hg2+ detection based on rhodamine B spirolactam derivative

ABSTRACT

In this work, a new turn-on fluorescent probe 1 for Hg²⁺ ions detection based on rhodamine B spirolactam was reported. Among tested metal ions, probe 1 shows high selectivity towards Hg²⁺ in the the mixture solution of methanol and 0.02 M HEPES buffer (V/V = 9:1, pH = 7.2). No absorption and emission band of probe 1 was observed in the range from 450 to 700 nm. While only addition of Hg²⁺ to probe 1 could lead to appearance of a new absorption band centered at 553 nm and a fluorescence emission band around 577 nm upon excitation at 520 nm. Moreover, it exhibits excellent linear relationship (R² = 0.9993) between fluorescence intensity at 577 nm and the concentration of Hg²⁺ from 1.6 to 32 μM. The sensing mechanism was proven to be spirolactam ring open induced by Hg²⁺ through ¹H NMR, MS, absorption and fluorescence spectra. In addition, probe 1 could detect Hg²⁺ in real water samples and on filter paper, which demonstrates its application in environment science.     

涡流发生器污垢特性实验台的设计

为了研究涡流发生器的污垢特性设计了一个能够在线监测温度、流量以及压差进而可以直接得到污垢热阻的实验台。通过验证实验、准确性分析与误差分析,验证了实验台设计精度在允许的误差范围内。示例实验结果表明实验台具有研究涡流发生器的污垢特性、压力特性以及换热特性的功能。     

Quantitative leak test for microholes and microtears in whole gloves and glove pieces

The current leak tests for gloves are qualitative. The developed quantitative leak test uses vacuum pressure to draw measured volumes of water to detect microholes/tears in whole gloves and glove pieces. A modified plastic vacuum desiccator interfaced with a Frazier air permeability tester allowed exposure of disposable unsupported/unlined/powderless Kimtech Blue nitrile to 50 mL of water for glove pieces or to 600 mL within a whole glove at vacua of 8–9 in. (20–23 cm) and 11–12 in. (28–30 cm) water gauge, respectively. Punctures of known dimensions were made before testing in specific glove areas using 21-, 22-, 26-, 30-, and 33-gauge needles (outer/inner diameters in micrometres of 873/514, 794/413, 635/311, 476/127, 318/159 and 238/133, respectively). The length of the punctures varied from 0.13 ± 0.01 to 0.80 ± 0.11 mm. Flow rates of water through the holes/tears ranged from 2.5 ± 0.4 to 106 ± 7 mL/min for glove pieces. For whole gloves, the ranges were from 31 ± 9 to 543 ± 110 mL/min in the palm area; and 0.23 ± 0.06 to 82 ± 18 mL/min in the finger/fingertip area. The method quantified tear lengths as short as 0.13 ± 0.01 mm.