Bixin extraction from defatted annatto seeds

Bixin is the major carotenoid in the seed of the Annatto plant (Bixa orellana L.). The aim of this study was to obtain extracts containing bixin from seeds that had been partially defatted by supercritical fluid extraction. Pressurized liquid extraction (PLE) and low-pressure solvent extraction (LPSE) methods were used, and the effects of the solvent, temperature, pressure, solvent mass to feed mass (S/F) ratio and ultrasonication were evaluated for the global yield (X₀(%)) and the bixin yield (BY(%)). Extraction conditions producing high yields of bixin were established for both the PLE and LPSE methods. Analysis of variance was used to examine the influence of the individual extraction variables in LPSE and PLE. For LPSE; significant effects were found for solvent, temperature, and the interactions of temperature with solvent and temperature with S/F. Solvent was the only variable that significantly affected X₀(%) and BY(%), for PLE. While ultrasonication did not significantly affect X₀(%) or BY(%), scanning electron microscopy analysis revealed structural changes in the vegetal matrix following this treatment.     

Toxicological screening of human plasma by on‐line SPE‐HPLC‐DAD: identification and quantification of acidic and neutral drugs

A multi‐analyte screening method for the quantification of 50 acidic/neutral drugs in human plasma based on on‐line solid‐phase extraction (SPE)–HPLC with photodiode array detection (DAD) was developed, validated and applied for clinical investigation. Acetone and methanol for protein precipitation, three different SPE materials (two electro‐neutral, one strong anion‐exchange, one weak cation‐exchange) for on‐line extraction, five HPLC‐columns [one C₁₈ (GeminiNX), two phenyl‐hexyl (Gemini C₆‐Phenyl, Kinetex Phenyl‐Hexyl) and two pentafluorophenyl (LunaPFP(2), KinetexPFP)] for analytical separation were tested. For sample pre‐treatment, acetone in the ratio 1:2 (plasma:acetone) showed a better baseline and fewer matrix peaks in the chromatogram than methanol. Only the strong anion‐exchanger SPE cartridge (StrataX‐A, pH 6) allowed the extraction of salicylic acid. Analytical separation was carried out on a Gemini C₆‐Phenyl column (150 × 4.6 mm, 3 µm) using gradient elution with acetonitrile–water 90:10 (v/v) and phosphate buffer (pH 2.3). Linear calibration curves with correlation coefficients r ≥ 0.9950/0.9910 were obtained for 46/four analytes. Additionally, this method allows the quantification of 23 analytes for therapeutic drug monitoring. Limits of quantitation ranged from 0.1 (amobarbital) to 23 mg/L (salicylic acid). Inter‐/intra‐day precisions of quality control samples (low/high) were better than 13% and accuracy (bias) ranged from ?14 to 10%. A computer‐assisted database was created for automated detection of 223 analytes of toxicological interests. Four cases of multi‐drug intoxications are presented. Copyright © 2015 John Wiley & Sons, Ltd.     

Extraction and separation of lanthanides from aqueous chloride and nitrate media using mixtures of binary extractants based on secondary and tertiary amines

1. Download : Download high-res image (97KB)
2. Download : Download full-size image

     

Synthesis of Chiral Calix[4]arene Derivative and Evaluation of its Recognition Properties

The article describes the synthesis and extraction properties of a new chiral calix[4]arene Schiff base ligand 5, which has been synthesized from 5,17-diformyl-25,27-bis-(4-nitrobenzyloxy)-26,28-dihidroxycalix[4]arene (4) by treatment with (S)-(-)-1-phenylethylamine. In this synthesis, it was thought to explore the role of chiral, as well as Schiff base sites in the recognition of targeted species ions (such as dichromate anions) as well as neutral/chiral molecules. At low pH, the ligand 5 is more effective for transferring the dichromate anions from an aqueous into a dichloromethane layer; may be due to the protonation of nitrogen atoms.

The extraction properties of ligand 5 towards the some selected α -amino acid methylesters are also reported. However, the ligand 5 did not display any selectivity towards the selected α-amino acid methylesters.     

Partitioning in Aqueous Two-Phase Systems: Fundamentals,Applications and Trends

Over the last years, aqueous two-phase systems (ATPS) regained an increasing interest due to their potential in the downstream processing of biomolecules. After many years with only a few articles published, a lot of effort and work has been put into studying these systems for the partitioning of a range of compounds including proteins, organic low-molecular weight molecules or metal ions. Although several research and review articles appeared, a background review on ATPS partitioning fundamentals is needed. In this article, partitioning theories and main effects of several important factors for partitioning, such as molecular weight of the polymer, effect of added salts, pH, electrical charges, and temperature on phase diagrams, tie-line lengths, interfacial tension and settling time of the two aqueous phases are extensively reviewed. The trend in ATPS research is given compiling the recent 2008–2013 research articles published in the field.     

Rapid and easy quantification of elemental sulphur in aqueous samples from biological reactors: the turbidimetric method revisited

Recent developments in wastewater treatment have led to a renewed interest to obtain elemental sulphur (S°) as a by-product from bioreactors. However, practical studies are limited by the gap of adequate analytical techniques for its determination. This paper provides a statistical study and matrix effect evaluation of an adapted spectrophotometric method for routine S° analyses in aqueous samples, based on a methodology previously described by Hart (1961). Four complex matrices were tested: domestic sewage and effluent samples from three different bioreactors. Tested performance criteria included linearity, matrix effect, limit of detection and quantification and S° recovery. Results were linear (R² = 0.99994) in the studied range (5 to 100 mg S° L^?1) and no matrix effect was observed. The accuracy was based on recovery values that varied from 100% to 106%. The colloidal S° separation and extraction protocol was also considered suitable for aqueous samples, reaching more than 99.0% of S° recovery.     

Automatic hierarchy classification in venation networks using directional morphological filtering for hierarchical structure traits extraction

The extraction of vein traits from venation networks is of great significance to the development of a variety of research fields, such as evolutionary biology. However, traditional studies normally target to the extraction of reticulate structure traits (ReSTs), which is not sufficient enough to distinguish the difference between vein orders. For hierarchical structure traits (HiSTs), only a few tools have made attempts with human assistance, and obviously are not practical for large-scale traits extraction. Thus, there is a necessity to develop the method of automated vein hierarchy classification, raising a new challenge yet to be addressed. We propose a novel vein hierarchy classification method based on directional morphological filtering to automatically classify vein orders. Different from traditional methods, our method classify vein orders from highly dense venation networks for the extraction of traits with ecological significance. To the best of our knowledge, this is the first attempt to automatically classify vein hierarchy. To evaluate the performance of our method, we prepare a soybean transmission image dataset (STID) composed of 1200 soybean leaf images and the vein orders of these leaves are manually coarsely annotated by experts as ground truth. We apply our method to classify vein orders of each leaf in the dataset. Compared with ground truth, the proposed method achieves great performance, while the average deviation on major vein is less than 5 pixels and the average completeness on second-order veins reaches 54.28%.     

Novel thionin-functionalised core shell magnetic nanoparticles for dispersive solid-phase extraction of Hg(II) in food and water samples

To develop an accurate and precise method for separation and pre-concentration of Hg(II), a novel thionin functionalised core shell structure magnetic material has been prepared and characterised. The extraction ability of the material was evaluated by magnetic solid-phase extraction coupled with inductively coupled plasma mass spectrometry determination of Hg(II) in food and water samples. Combining the advantages of magnetic separation with selective extraction of thionin towards Hg(II), the material exhibits enhanced enrich selectivity and efficiency for Hg(II). The experimental parameters influencing Hg(II) extraction efficiency, including pH of the aqueous solution, the dosage of the adsorbent, extraction time and sample volume, were systematically investigated. Under the optimised conditions, concentration of Hg(II) at 1.0 μg L^?1 can be successfully enriched by the material without the interference of the common co-existing ions. The enrichment factor and adsorption capacity were 250 and 75.2 mg g^?1, and precise of the method was confirmed by analysing the spiked food, water samples and standard water reference samples with the recoveries of 92.5–101.8%.     

Development and optimization of ultra-high performance supercritical fluid chromatography mass spectrometry method for high-throughput determination of tocopherols and tocotrienols in human serum

The goal of this study was to develop an effective supercritical fluid chromatography method using single quadrupole MS for analysis of all isomeric forms of vitamin E. Finally, two fast and effective methods, the high resolution one and the high speed one, for the determination of 8 vitamin E isomers in human serum were developed.     

A rapid UPLC‐MS/MS method for the determination of oleanolic acid in rat plasma and liver tissue: application to plasma and liver pharmacokinetics

A reliable high‐throughput ultra‐high performance liquid chromatography–tandem mass spectrometry (UPLC‐MS/MS) method was developed and validated for oleanolic acid (OA) determination in rat plasma and liver tissue using glycyrrhetic acid as the internal standard (IS). Plasma and liver homogenate samples were prepared using solid‐phase extraction. Chromatographic separation was achieved on a C₁₈ column using an isocratic mobile phase system. The detection was performed by multiple reaction monitoring mode via positive electrospray ionization interface. The calibration curves showed good linearity (R² > 0.9997) within the tested concentration ranges. The lower limit of quantification for plasma and liver tissue was ≤0.75 ng/mL. The intra‐ and inter‐day precision and accuracy deviations were within ±15% in plasma and liver tissue. The mean extraction recoveries ranged from 80.8 to 87.0%. In addition, the carryover, matrix effect, stability and robustness involved in the method were also validated. The method was successfully applied to the plasma and hepatic pharmacokinetics of OA after oral administration to rats. Copyright © 2015 John Wiley & Sons, Ltd.